ACSCTG Type 1 Replacement 1-Button Remote
Genie Intellicode remote ACSCTG Type 1 Manual
Genie Intellicode Garage Door Opener Remote Programming Instructions- For ACSCTG Type 1 Replacement 1-Button Remote - G1T-BX
This Genie Intellicode Remote comes from the factory designed to operate any Genie® Intellicode® type garage door opener.
A. For use with Learn Code Button equipped Openers (1995 to Present) —
- Remove the battery’s protective film by pulling it out the bottom of the remote.
- Locate the Learn Code Button and Learn Code Indicator LED on your opener’s powerhead Fig. 1A below (See your owner’s manual).
- Press and release the Learn Code Button—the Red Learn Code LED will blink rapidly.
- Press and release the Remote Button, —the Learn Code LED will stay on (stops blinking).
- Press and release the Remote Button again—the Learn Code LED will turn off.
- Press and release the Remote Button again—the Door Opener will run.
THE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.
B. For use with Program/Set Button equipped Openers (2010 to Present)—
- Remove the battery’s protective film by pulling it out the bottom of the remote.
- Locate the Program/Set Button and Programming Indicator LEDs on your opener’s powerhead Fig. 1B below (See your owner’s manual).
- Press the Program/Set button until the round LED will turn blue.
- Release the Program/Set button—the long LED will blink purple.
- Press and release the Remote Button, —the long LED will turn steady purple (stops blinking).
- Press and release the Remote Button again—both LEDs will blink blue and turn off.
- Press and release the remote button again—the Door Opener will run.
THE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.
Questions & Answers
Ask a Question-
Will this remote work with the GCG350L model garage door opener??
Yes, it will.
-
will it work with a model1S550/A
Yes, it will!
-
Which remote replaces model ( FCC. ID BBQACSCT
You can use this one button remote to replace the BBQACSCT.
-
will this remote work with the GXL9550 model garage door opener
No, it is not. You would need the Genie Master Remote, model GM3T-R.
-
will this work with the B8Q ACSGT
Yes, it will.
-
Will this work for Genie Excelerator ISD 1000 model? Thanks.
Yes, it will!
-
I have a learn button garage door opener. When I program one remote, and I try to program the next one, it erases the first remote that I just programmed. I don't know how to get both remotes programmed
You most likely have a garage door opener that can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the power head up to seven. If you need assistance, you can also contact Genie customer service for support at 1-800-354-3643.
-
Will this remote replace a G3T-A?
Yes, it will!
-
I'm sorry my last question was the wrong remote. Will this one replace a GICT390? I see the product describes it will replace a GICT390-1 just not sure if that's the same remote..thank you
No problem! Yes, this remote will replace the GICT390 remote.
-
Will this work on the old ACSR3?
Yes, it will.
-
My old remotes no longer function. I have 1/2 HP Model H6000A Genie Intellicode. I need 2 remotes. Can you tell me the type to get?
You can get any of the remotes we have right no, they are all Intellicode models. If you just have one garage door, I would recommend this G1T-BX remote.
-
Will this remote work for a Genie - current remote identified as: G1CT 390. FCC Part 15.
Yes, this will work to replace the GICT390 remote.
-
Will this remote replace a ACSCTG Type 3, three button remote? Thanks! KJ
Yes, it will. It only has one button (instead of three). So if you only need to operate one garage door, this would be perfect.
-
does any remote work with the 2060L system
Any of the Intellicode remotes will work with the 2060L.
-
Does this unit replace model PMX500IC/B, receiver model ACSR1G Series II controller. Many thanks.
Yes, this will work with the PMX500IC/B.
-
will it work w/ pmx500IC/B
Yes, it will!
-
Will this work with the model Acsr1g?
Yes, it will.
-
will this work w/isl950/a
Yes, it will!
-
Will this work with model H6000?
Yes, it will!
-
Will this work with fcc Id:b8qacsct. 1/2 H.P. Model H 4000A a stag type 1
Yes, it will!
-
Will this work with sd9500?
No, it will not. You would need the Genie Master Remote, model GM3T-R.
-
I only want (1) garage door opener
This remote only has one button.
-
Does the one button remote work with PCG500ML
Yes, it does!
-
Will it work with PMX 500-XL opener?
Yes, it will!
-
WILL MODEL # CM86001c/a work with this model
Yes, it will!
-
Ours is really old - Model GT912 FCC ID: 88Q GT50. And there is a number engraved - 1896. Used a 9V battery. Inside CTS and 206-121. Bar has 12 slots and all seem to be up. Please let me know if the new model will work. Thanks.
You would need the Genie Master Remote. Model GM3T-R. It will replace the GT9-12 remote.
-
will this work with a genie pro82 1/3 hp screw drive opener
No, this will not. For the Pro82 model garage door opener, you would need the Genie Master remote, model GM3T-R.
-
will this remote work with an older model #2060L?
Yes, it will!
-
Will this work with the CM8600IC/A with a ACSR3 receiver?
Yes, it will!
-
I have codedodger model ACSCTO. Is there a replacement remote?
Yes, this G1T-BX remote will replace it.
-
Will it work on model 2060L-07/m
Yes, it will!
-
How do I program an ASCGTG Type 1 with the garage door opener.
You can find the programming instructions here... https://www.geniecompany.com/data/products/accessories/manuals/1-btn-remote_eng-spa.pdf
If you need additional assistance you can also contact our customer service support at 1-800-354-3643. -
will this remote work with model CM86001C/A
Yes, it will!
-
Will this work with Model PRO99-IC
Yes, it will!
-
Will this work in place of number ACSGT type 1. Genie INTELLICODE garage door opener
Yes, it will!
-
Will this work with Model SD9000?
No, it will not. You will need the Genie Master Remote, model GM3T-R.
-
Will this remote work with 1/2 HP Model 2020L Genie?
Yes, it will.
-
Will this work with Aladdin 1020L-390
Yes, it will!
-
Will this remote work with IS920/A
Yes, it will.
-
does the opener motor require an antenna ?
The garage door opener powerhead will have an antenna.
-
Will this work with ACSCTG Type 3?
Yes, it will.
-
Will this remote work on an sp 129 screw model opener
No, this will not work on the SP 129. This remote will only work on Genie Intellicode model garage door openers, not the dip switch style.
-
Will this remote work with H4000A model.
Yes, it will!
-
Will the ACSCTG Type 1 Replacement 1-Button Remote work with the 1/2 H.P. MODEL PMX500IC/B operator?
Yes, it will!
-
Lost my original remote, will this work for the Cryptar II digital control
No, this will not work with the Cryptar II.
-
We have a Genie Pro Screw Drive Model CM8600-XL/M for which the remote has been lost. Is this the correct replacement opener?
Yes, it is.
-
Will this remote work for the IS900B? My old remote is model# ACSGT type 2.
Yes, it will!
-
will the replacement 1 button remote work? I have a genie 912.
No, to replace the Genie 912 remote you would need the Genie Master Remote. GM3T-R.
-
what is the model number of this new remote?
The 1-Button remote model is G1T-BX.
-
Will this remote work with a H4000-07/M?
Yes, it will.
-
does this replace genie promax2 model PCG500ML
This remote will work with the Genie ProMax2 model PCG500ML.
-
Will it work with GS 210?
No, it will not.
-
Will this remote work with the Genie Model 2020L FCC ID: B8Q315390R1?
Yes, it will.
-
Will this remote work with Genie model IMS 1000/A?
Yes, it will!
-
Will this remote work for Genie Excellerator Model #ISD995?
Yes, it will!
-
will this work with model H8000-7
Yes, it will!
-
If I get this new style remote and program it to my garage door opener, will my other old style ACSCTG Type 1 remote still work?
Yes, it will! When you add the new one-button remote, you can still continue to use any other remotes, such as the ACSCTG Type 1- or keypads and vehicles that you already have programmed to your garage door opener.