Free Shipping On All U.S. Orders $14.99 +
{"id":10799127939,"title":"Wall Console for Series II Product- 39165R","handle":"wall-console-for-series-ii-product","description":"\u003cp\u003eGenies Multi-function wired garage door opener wall console \u003cspan\u003eFeaturing Sure Lock\u003c\/span\u003e\u003cspan class=\"reg\"\u003e™\u003c\/span\u003e\u003cspan\u003e Mode with new Slide Lock Design. Three-function wall console with a backlit panel that is easy to locate in the dark. Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation; newly designed switch helps prevent unintended activation of the lock-out feature. Handy programming card located in a holder on the console for quick reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBack-lit panel makes it easy to locate, even in the dark\u003c\/li\u003e\n\u003cli\u003e3 function buttons; open\/close, lock, and lights\u003c\/li\u003e\n\u003cli\u003eWorks with all Genie garage door opener models that use Series II electronics\u003c\/li\u003e\n\u003cli\u003eQuick and easy installation for replacement of any other Series II wall console \u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eReplaces discontinued Series II wall consoles and wall buttons: \u003cspan\u003eGBWC2-BX, GPWC-BX, GWC-2, GPWC-2WLB \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/h4\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eProduct Installation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.geniecompany.com\/data\/products\/accessories\/wall-console-series-II_ENG-FRE_02-01-2015.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Instruction Manual \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGenie Series II Wall Console Installation Instructions\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_warning_medium.png?v=1548875880\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eTOOLS REQUIRED\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_tools_medium.png?v=1548875507\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOPTIONAL TOOLS REQUIRED\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_optional_tools_medium.png?v=1548875560\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPERATION AND FEATURES.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall console has 3 buttons and 1 indicator backlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIndicator backlight will display red when wall console is properly wired and Sure-Lock™ is OFF. When SureLock™ is ON, indicator backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen\/Close Button \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis button opens and closes garage door. When Sure-Lock™ is ON, the Open\/Close button will CLOSE door only.\u003c\/p\u003e\n\u003cp\u003eNOTE: Constant button pressure in the CLOSE mode will override STB error responses in the powerhead and close door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent Light Console Button \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this button to turn powerhead lights ON. Powerhead lighting will remain ON until this button is pressed again or a door action has been completed.\u003c\/p\u003e\n\u003cp\u003eNote: If opener has a Motion Detector, the sensor will keep the powerhead lights ON as long as motion is detected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSure-Lock™ Switch \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen Sure-Lock™ is ON and the garage door is in the fully closed position, the powerhead cannot be activated by the wall console or a remote. Note: If Sure-Lock™ is activated while the garage door is not fully closed, the door can still be operated until the door is in the fully closed position.\u003c\/p\u003e\n\u003cp\u003e• Slide the Sure-Lock™ Switch up to activate it. The backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003e• Slide the Switch down to turn Sure-Lock™ OFF. The backlight will be ON.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wall_console_medium.png?v=1548875703\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWall Console Replacement Using Previously Installed Wiring\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNeed to install new wire? \u003ca href=\"https:\/\/store.geniecompany.com\/products\/bell-wire\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWire (P\/N 35265A.S)\u003c\/a\u003e, can be purchased\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALLING REPLACEMENT WALL CONSOLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Disconnect power to powerhead.\u003c\/p\u003e\n\u003cp\u003e• Remove existing wall console from the wall by removing mounting screws.• Remove wires from existing wall console.\u003c\/p\u003e\n\u003cp\u003e• Split and strip ends of wire if required (Fig. 2).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_2_medium.png?v=1548876120\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e• \u003c\/strong\u003eFasten wire to control board screws on back of wall console (Fig. 3):\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_3_medium.png?v=1548876180\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003e• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003eNOTE: When existing wires have a color code different from above (FIG. 3), or none at all—make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eMount wall console to wall using screws provided. Verify height at least 5 ft. above floor (Fig. 4).\u003c\/p\u003e\n\u003cp\u003eReconnect power to powerhead.\u003c\/p\u003e\n\u003cp\u003e• Check operation of each wall console button and feature.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_4_medium.png?v=1548876302\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWall Console Replacement Using New Wiring\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNOTE: IF MOUNTING CONSOLE IN A NEW LOCATION THAT LOCATION MUST MEET THE FOLLOWING CRITERIA:\u003c\/p\u003e\n\u003cp\u003e• within sight of garage door,\u003c\/p\u003e\n\u003cp\u003e• at least 5 ft. above floor (out of small children’s reach) and,\u003c\/p\u003e\n\u003cp\u003e• away from all moving parts of the garage door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDISCONNECT POWER TO POWERHEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Remove existing wall console from the wall by removing mounting screws.\u003c\/p\u003e\n\u003cp\u003e• Split and strip ends of wire (Fig. 2).\u003c\/p\u003e\n\u003cp\u003e• Fasten wires to control board screws on back of wall console (Fig. 3).\u003c\/p\u003e\n\u003cp\u003e• Remount wall console.\u003c\/p\u003e\n\u003cp\u003e• Route wire from wall console to powerhead.\u003c\/p\u003e\n\u003cp\u003e• As you run wire, securely fasten wires to ceiling and wall using insulated staples (Fig. 5). Not provided. Staples should be snug only.\u003c\/p\u003e\n\u003cp\u003e• Route wire through wire guide as shown in Fig. 6 to the terminals.\u003c\/p\u003e\n\u003cp\u003e• Split and strip ends of wire (Fig. 2).\u003c\/p\u003e\n\u003cp\u003e• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003e• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003e• While pressing in locking tab, insert wire into terminal hole and then release locking tab. Confirm secure connection with a gentle tug. (Fig. 7).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_5_medium.png?v=1548876623\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_7_large.png?v=1548876688\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE: Make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003eNOTE: FOR CONNECTION TO MODELS NOT SHOWN— SEE YOUR OWNERS MANUAL.\u003c\/p\u003e\n\u003cp\u003eRECONNECT POWER TO POWERHEAD.\u003c\/p\u003e\n\u003cp\u003e• Check operation of each button and feature.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"385\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" width=\"385\"\u003eReplacement Wall Console  Recommendation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number:\u003c\/td\u003e\n\u003ctd\u003eGBWCSL2-BX\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number:\u003c\/td\u003e\n\u003ctd\u003e39165R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription:\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSeries II Wall Console \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39165R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\"\u003eIf you have any of the below wall consoles, a replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003ewall console can be GBWCSL2-BX.\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/38066R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37351R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/35661R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGBWC2-BX\u003c\/td\u003e\n\u003ctd\u003eGPWC-BX\u003c\/td\u003e\n\u003ctd\u003eGWC-2\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart 38066R\u003c\/td\u003e\n\u003ctd\u003ePart 37351R\u003c\/td\u003e\n\u003ctd\u003ePart 35661R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/29599SS_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGWC-BX\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart 29599S.S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2017-08-22T16:50:42-04:00","created_at":"2017-08-22T16:54:47-04:00","vendor":"The Genie Company","type":"Wall Console","tags":["Series II","Wall Console"],"price":2699,"price_min":2699,"price_max":2699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43844332867,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"39165R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wall Console for Series II Product- 39165R","public_title":null,"options":["Default Title"],"price":2699,"weight":91,"compare_at_price":null,"inventory_quantity":997,"inventory_management":"shopify","inventory_policy":"continue","barcode":"050049020576"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/39165R-Genie-Wall-Console-01.jpg?v=1540410086","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/39165R-Genie-Wall-Console-21.jpg?v=1540410086","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/39165R-Genie-Wall-Console-14.jpg?v=1540410086"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/39165R-Genie-Wall-Console-01.jpg?v=1540410086","options":["Title"],"content":"\u003cp\u003eGenies Multi-function wired garage door opener wall console \u003cspan\u003eFeaturing Sure Lock\u003c\/span\u003e\u003cspan class=\"reg\"\u003e™\u003c\/span\u003e\u003cspan\u003e Mode with new Slide Lock Design. Three-function wall console with a backlit panel that is easy to locate in the dark. Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation; newly designed switch helps prevent unintended activation of the lock-out feature. Handy programming card located in a holder on the console for quick reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBack-lit panel makes it easy to locate, even in the dark\u003c\/li\u003e\n\u003cli\u003e3 function buttons; open\/close, lock, and lights\u003c\/li\u003e\n\u003cli\u003eWorks with all Genie garage door opener models that use Series II electronics\u003c\/li\u003e\n\u003cli\u003eQuick and easy installation for replacement of any other Series II wall console \u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eReplaces discontinued Series II wall consoles and wall buttons: \u003cspan\u003eGBWC2-BX, GPWC-BX, GWC-2, GPWC-2WLB \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/h4\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eProduct Installation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.geniecompany.com\/data\/products\/accessories\/wall-console-series-II_ENG-FRE_02-01-2015.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Instruction Manual \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGenie Series II Wall Console Installation Instructions\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_warning_medium.png?v=1548875880\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eTOOLS REQUIRED\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_tools_medium.png?v=1548875507\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOPTIONAL TOOLS REQUIRED\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_optional_tools_medium.png?v=1548875560\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPERATION AND FEATURES.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall console has 3 buttons and 1 indicator backlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIndicator backlight will display red when wall console is properly wired and Sure-Lock™ is OFF. When SureLock™ is ON, indicator backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen\/Close Button \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis button opens and closes garage door. When Sure-Lock™ is ON, the Open\/Close button will CLOSE door only.\u003c\/p\u003e\n\u003cp\u003eNOTE: Constant button pressure in the CLOSE mode will override STB error responses in the powerhead and close door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent Light Console Button \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this button to turn powerhead lights ON. Powerhead lighting will remain ON until this button is pressed again or a door action has been completed.\u003c\/p\u003e\n\u003cp\u003eNote: If opener has a Motion Detector, the sensor will keep the powerhead lights ON as long as motion is detected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSure-Lock™ Switch \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen Sure-Lock™ is ON and the garage door is in the fully closed position, the powerhead cannot be activated by the wall console or a remote. Note: If Sure-Lock™ is activated while the garage door is not fully closed, the door can still be operated until the door is in the fully closed position.\u003c\/p\u003e\n\u003cp\u003e• Slide the Sure-Lock™ Switch up to activate it. The backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003e• Slide the Switch down to turn Sure-Lock™ OFF. The backlight will be ON.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wall_console_medium.png?v=1548875703\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWall Console Replacement Using Previously Installed Wiring\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNeed to install new wire? \u003ca href=\"https:\/\/store.geniecompany.com\/products\/bell-wire\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWire (P\/N 35265A.S)\u003c\/a\u003e, can be purchased\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALLING REPLACEMENT WALL CONSOLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Disconnect power to powerhead.\u003c\/p\u003e\n\u003cp\u003e• Remove existing wall console from the wall by removing mounting screws.• Remove wires from existing wall console.\u003c\/p\u003e\n\u003cp\u003e• Split and strip ends of wire if required (Fig. 2).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_2_medium.png?v=1548876120\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e• \u003c\/strong\u003eFasten wire to control board screws on back of wall console (Fig. 3):\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_3_medium.png?v=1548876180\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003e• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003eNOTE: When existing wires have a color code different from above (FIG. 3), or none at all—make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eMount wall console to wall using screws provided. Verify height at least 5 ft. above floor (Fig. 4).\u003c\/p\u003e\n\u003cp\u003eReconnect power to powerhead.\u003c\/p\u003e\n\u003cp\u003e• Check operation of each wall console button and feature.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_4_medium.png?v=1548876302\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWall Console Replacement Using New Wiring\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNOTE: IF MOUNTING CONSOLE IN A NEW LOCATION THAT LOCATION MUST MEET THE FOLLOWING CRITERIA:\u003c\/p\u003e\n\u003cp\u003e• within sight of garage door,\u003c\/p\u003e\n\u003cp\u003e• at least 5 ft. above floor (out of small children’s reach) and,\u003c\/p\u003e\n\u003cp\u003e• away from all moving parts of the garage door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDISCONNECT POWER TO POWERHEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Remove existing wall console from the wall by removing mounting screws.\u003c\/p\u003e\n\u003cp\u003e• Split and strip ends of wire (Fig. 2).\u003c\/p\u003e\n\u003cp\u003e• Fasten wires to control board screws on back of wall console (Fig. 3).\u003c\/p\u003e\n\u003cp\u003e• Remount wall console.\u003c\/p\u003e\n\u003cp\u003e• Route wire from wall console to powerhead.\u003c\/p\u003e\n\u003cp\u003e• As you run wire, securely fasten wires to ceiling and wall using insulated staples (Fig. 5). Not provided. Staples should be snug only.\u003c\/p\u003e\n\u003cp\u003e• Route wire through wire guide as shown in Fig. 6 to the terminals.\u003c\/p\u003e\n\u003cp\u003e• Split and strip ends of wire (Fig. 2).\u003c\/p\u003e\n\u003cp\u003e• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003e• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 \u0026amp; 7).\u003c\/p\u003e\n\u003cp\u003e• While pressing in locking tab, insert wire into terminal hole and then release locking tab. Confirm secure connection with a gentle tug. (Fig. 7).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_5_medium.png?v=1548876623\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/wc_fig_7_large.png?v=1548876688\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE: Make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.\u003c\/p\u003e\n\u003cp\u003eNOTE: FOR CONNECTION TO MODELS NOT SHOWN— SEE YOUR OWNERS MANUAL.\u003c\/p\u003e\n\u003cp\u003eRECONNECT POWER TO POWERHEAD.\u003c\/p\u003e\n\u003cp\u003e• Check operation of each button and feature.\u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"385\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" width=\"385\"\u003eReplacement Wall Console  Recommendation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number:\u003c\/td\u003e\n\u003ctd\u003eGBWCSL2-BX\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number:\u003c\/td\u003e\n\u003ctd\u003e39165R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription:\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSeries II Wall Console \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39165R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\"\u003eIf you have any of the below wall consoles, a replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003ewall console can be GBWCSL2-BX.\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/38066R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37351R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/35661R_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGBWC2-BX\u003c\/td\u003e\n\u003ctd\u003eGPWC-BX\u003c\/td\u003e\n\u003ctd\u003eGWC-2\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart 38066R\u003c\/td\u003e\n\u003ctd\u003ePart 37351R\u003c\/td\u003e\n\u003ctd\u003ePart 35661R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/29599SS_small.jpg?v=1533824323\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGWC-BX\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart 29599S.S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}

Wall Console for Series II Product- 39165R

Product Description
$26.99
Maximum quantity available reached.

Genies Multi-function wired garage door opener wall console Featuring Sure Lock Mode with new Slide Lock Design. Three-function wall console with a backlit panel that is easy to locate in the dark. Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation; newly designed switch helps prevent unintended activation of the lock-out feature. Handy programming card located in a holder on the console for quick reference.

  • Back-lit panel makes it easy to locate, even in the dark
  • 3 function buttons; open/close, lock, and lights
  • Works with all Genie garage door opener models that use Series II electronics
  • Quick and easy installation for replacement of any other Series II wall console 
  • Replaces discontinued Series II wall consoles and wall buttons: GBWC2-BX, GPWC-BX, GWC-2, GPWC-2WLB 

 California Residents: Proposition 65 WARNING

Sku: 39165R

 PDF Instruction Manual 

Genie Series II Wall Console Installation Instructions

TOOLS REQUIRED

 

OPTIONAL TOOLS REQUIRED

OPERATION AND FEATURES.

Wall console has 3 buttons and 1 indicator backlight.

Backlight

Indicator backlight will display red when wall console is properly wired and Sure-Lock™ is OFF. When SureLock™ is ON, indicator backlight will be OFF.

Open/Close Button

This button opens and closes garage door. When Sure-Lock™ is ON, the Open/Close button will CLOSE door only.

NOTE: Constant button pressure in the CLOSE mode will override STB error responses in the powerhead and close door.

Independent Light Console Button

Use this button to turn powerhead lights ON. Powerhead lighting will remain ON until this button is pressed again or a door action has been completed.

Note: If opener has a Motion Detector, the sensor will keep the powerhead lights ON as long as motion is detected.

Sure-Lock™ Switch

When Sure-Lock™ is ON and the garage door is in the fully closed position, the powerhead cannot be activated by the wall console or a remote. Note: If Sure-Lock™ is activated while the garage door is not fully closed, the door can still be operated until the door is in the fully closed position.

• Slide the Sure-Lock™ Switch up to activate it. The backlight will be OFF.

• Slide the Switch down to turn Sure-Lock™ OFF. The backlight will be ON.

Wall Console Replacement Using Previously Installed Wiring

Need to install new wire? Wire (P/N 35265A.S), can be purchased

INSTALLING REPLACEMENT WALL CONSOLE

• Disconnect power to powerhead.

• Remove existing wall console from the wall by removing mounting screws.• Remove wires from existing wall console.

• Split and strip ends of wire if required (Fig. 2).

• Fasten wire to control board screws on back of wall console (Fig. 3):

 

• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 & 7).

• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 & 7).

NOTE: When existing wires have a color code different from above (FIG. 3), or none at all—make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.

• Mount wall console to wall using screws provided. Verify height at least 5 ft. above floor (Fig. 4).

Reconnect power to powerhead.

• Check operation of each wall console button and feature.

 

Wall Console Replacement Using New Wiring

NOTE: IF MOUNTING CONSOLE IN A NEW LOCATION THAT LOCATION MUST MEET THE FOLLOWING CRITERIA:

• within sight of garage door,

• at least 5 ft. above floor (out of small children’s reach) and,

• away from all moving parts of the garage door.

DISCONNECT POWER TO POWERHEAD.

• Remove existing wall console from the wall by removing mounting screws.

• Split and strip ends of wire (Fig. 2).

• Fasten wires to control board screws on back of wall console (Fig. 3).

• Remount wall console.

• Route wire from wall console to powerhead.

• As you run wire, securely fasten wires to ceiling and wall using insulated staples (Fig. 5). Not provided. Staples should be snug only.

• Route wire through wire guide as shown in Fig. 6 to the terminals.

• Split and strip ends of wire (Fig. 2).

• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 & 7).

• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 & 7).

• While pressing in locking tab, insert wire into terminal hole and then release locking tab. Confirm secure connection with a gentle tug. (Fig. 7).

 

NOTE: Make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.

NOTE: FOR CONNECTION TO MODELS NOT SHOWN— SEE YOUR OWNERS MANUAL.

RECONNECT POWER TO POWERHEAD.

• Check operation of each button and feature.

 

Replacement Wall Console  Recommendation
Model Number: GBWCSL2-BX
Part Number: 39165R
Description: Series II Wall Console 
If you have any of the below wall consoles, a replacement
wall console can be GBWCSL2-BX.
GBWC2-BX GPWC-BX GWC-2
Part 38066R Part 37351R Part 35661R
GWC-BX
Part 29599S.S

 

Questions & Answers

Ask a Question
  • Is this compatible with model 1028?

    Yes, it is! 

  • Is this compatible with opener Model H4000-07/M? Thanks.

    Yes, it is. 

  • Is this compatible with GXL9550? My unit is about 23 years old.

    No, this will not work with the GXL9550. You can use the non-lit universal push button- 37644R.

  • Is this compatible with the 1000 series?

    Yes, it is. 

  • Need wall console for Genie Excelerator 3531835447. Which one will work? Thanks

    You can use this series II wall console. 

  • Is this compatible with Genie Intellicode wall console that is wired with two buttons and one slide lock out on top?

    Yes, this would replace that one. 

  • Is this compatible with H 6000

    Yes, it is! 

  • will this work for Genie model 2042 ?

    Yes, it will. 

  • will this work with GCG,PCG,H intellacode series II?

    Yes, it will. 

  • the part number i want is GPWC-2WLB is this still available ?

    No it is not. This one replaces it. 

  • Is this compatible with CM8600-1C?

    Yes, it will. 

  • is it compatible with model 2060 wall mount #GWC-2w

    Yes, it is. 

  • Is this compatible with model CM7600 ic/a? I would like a wall console with a separate button to turn on the light. Thanks

    Yes, it is! 

  • Is this compatible with Model 2028 ?

    Yes, it is!

  • is this compatible with Excelerator D990 ?

    Yes, it is. 

  • Is this Wall Console for Series II Product- 39165R work on Model #IS550-A?

    Yes, it will. 

  • Is it compatable for GeniePro Stealth /Max Serial Number PMX5001C/B?

    Yes, it is. 

  • Is the Wall Console for Series II Product- 39165R compatible with Genie Model 3060L-07?

    Yes, it is. 

  • Is this compatible with model 2022? If not could you tell me which one is.

    Yes, it is!

  • Is this compatible with model # GXL-1000_2MS. The wall mounted switch that came with it has 4-wires. was purchased in1995.

    No, the 39165R wall console will not replace the 4-wire wall console. You can replace the 4-wire wall console with the universal push button, 37644R.

  • Is this compatible with the 2022 model?

    Yes, it is.

  • Is this compatible with the Genie 8000D Garage Door Opener?

    If it is the Genie model H8000D, then yes this wall console is compatible.

  • is Model GBWCSL2 compatible with GXL9550?

    No, this will not work with the GXL9550.  You can use the universal push button.

  • Is this compatible with GXL9500 CL?

    No, this will not work with the GXL 9500's.

  • Is wall control model GBWCSL2-BX compatible with Genie screw drive model GXL9500 CL?

    No. This will not work with the GXL9500 CL.

  • Will this work with an ISD995?

    Yes, it will!

  • Will the 39165 R work with Model H8000-07 garage door opener?

    Yes, it will.

  • I need a replacement Wall Console for my H6000A Genie ?

    You can use the 39165R Series II wall console for the H6000A.

  • Is this compatible with IS550/a? I'm unsure of that's a series 2

    Yes, this will work with the IS550/A model.

  • Will this replace a bad wall mount control for a SilentMax 1000 Model 3042

    Yes, this will work with a 3042 model garage door opener as long as your current one was a Series II model. If your current wall console is grey with white buttons, this will replace it. If you are not sure or have a wall console with black buttons, that would be a Series III model- you can contact Genie customer service at 1-800-354-3643 for more details.

  • Does this wall console work with IS900/A. Thanks.

    Yes, it does!

  • Can I install (2) wall consoles for (1) opener? Or am I only limited to (1) wall console. Opener Model 7055, Thank you for your time and consideration

    You can only use one of the Series II wall consoles. You can add an additional Wireless Wall Console (39902R) or a Non- lit Universal Push-button (37644R).

  • Will this work with the Genie PRO88-S?

    No, this will not. For the Pro88 model garage door opener, we have the Universal Push Button that would work.

  • Please indicate console switch for Model H6000-07. Thank you

    You can use the Series II wall console, 39165R. 

  • Will this replace my wall unit for a 1995/96 Overhead Door Legacy? It's a simple pad with sliding lock at top, a light function button on left and door up/down button on the right. Thanks

    Yes, it will!

  • Is this wall console compatible with model PRO 951 C/A (Genie Pro Automatic Screw Drive Opener/Operator System w/Genie Intellicode Transmitter & Series II Electronics) ? If not, is there a compatible wall console available? If so, what's the part # ?

    Yes, this Series II wall console will work with the Pro95 IC/A model garage door opener.

  • P.S. to question I just sent: My existing wall console has 2 wires, open & close buttons on front, & lock on top of unit.

    This new one will also have those features and is a two-wire wall console. It will work with your Pro95 IC/A model.

  • Will this replace product code1047 / model GPWC-2WIC ? My opener is a model IS900/B.

    This series II wall console will work with the IS900/B model garage door opener.

  • what indoor wall button is compatable with model H6000A opener?

    Please use either Series II wall console, 39165R or the Universal Push Button, 37644R