Skip to product information
1 of 1

The Genie Company

Belt Drive Bullet Assembly - 37556R.S

Belt Drive Bullet Assembly - 37556R.S

Regular price $11.98 USD
Regular price Sale price $11.98 USD
Sale Sold out

The belt drive bullet assembly is the white piece that holds the belt for the garage door opener together. The carriage assembly for these models also attaches to this bullet assembly allowing it to move the garage door open and closed. 

  • Assembly contains: 2 Bullet side pieces, and screws to install it
  • Genuine Genie replacement part 
  • Compatible with the following Genie models that have the belt rail: 1028, 2028, 3020H, 3020H-B, 3024, 4024, 3022, 3042, 3120H, 3120H-B, 4022, 4042, 4124, 4164 (ReliaG, IntellG, SilentMax, and TriloG, series with these model numbers) 

SKU: 37556R.S

In Stock! Usually ships within 24 hours.

ASK A QUESTION View full details
Genie garage door opener Belt Drive replacement Bullet Asembly - 37556R.S for models 1028, 2028, 3020H, 3020H-B, 3024, 4024, 3022, 3042, 4022, 4042
Belt Drive Bullet Assembly - 37556R.S
$11.98

QUESTIONS & ANSWERS

Ask a Question

Bullet Assembly 37556R.S Replacement Instructions

These instructions are written assuming that you will have ample room around the garage door opener to perform this repair. Some rare instances will require removal of the unit from it's mounting hardware and repair made on a bench or the garage floor. Refer to your owner's manual for proper assembly and carefully read and understand all warnings and cautions pertaining to your unit. 

WARNING
BE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE INPUT POWER LINES PRIOR TO REMOVING THE MOTOR COVER.

WARNING
ANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION.

1. Pull emergency release cord on the carriage to disengage opener to close the door if necessary. (If unable to lower the door using the garage door opener, use extreme caution manually closing the door. Before pulling the emergency release cord, make certain people and objects are clear of the garage door opening.) 

2. Run the garage door opener until the belt bullet assembly is somewhere in mid travel to access it. 

3. Unplug the garage door opener power cord from the power receptacle. 

4. Loosen tensioner nut from the garage door end of the rail to create slack in the belt. (FIGURE 1). Do not completely remove the tensioner nut. 

Belt Bullet replacement 37556R.S for Genie garage door openers figure 1

5. Remove the four screws from bullet assembly and then remove the old bullet. (FIGURE 2-A). 

6. Install the new replacement bullet assembly 37556R.S in reverse order. (FIGURE 2-A). 

Genie garage door opener belt bullet assembly replacement instructions figure 2A

7. Tighten tensioner nut until the slack is removed from the belt. Be sure to not overtighten. 

8. Manually Operate the garage door until the carriage engages the new bullet assembly. The two will lock together. 

9. Plug the garage door opener in. 

10. Reprogram limit settings per the owners manual if necessary. 

  • Shipping Truck

    Free Shipping

    We offer FREE shipping and handling on all orders that total over $17.99 and are shipped to a US address. All orders are shipped using UPS ground, directly from The Genie Company.

  • Genuine Genie Accessories and Parts

    Genuine Replacements

    Buying GENUINE Genie accessories and parts guarantees that you are getting quality OEM materials backed by a Genie warranty.

  • Customer support chat

    Support

    Need assistance? We are here for you! We offer a wide range of customer support options including contact by phone or email, web chat services with a live agent, and a robust support section also located on our website.  All customer care teams and services are based in the USA.

FREE SHIPPING ON ALL US ORDERS 17.99 AND UP