Free Shipping On All U.S. Orders $14.99 +
{"id":9836611971,"title":"Safe-T-Beam® Garage Door Opener Safety Sensors","handle":"safe-t-beam-sensors","description":"\u003cp\u003eGenies Safe-T-Beam system is designed to ensure maximum safety for your garage door opener operation. Using an invisible infrared beam across the opening of the door, the Genie garage door safety sensor detects any object passing through the LED beam of light and automatically reverses the closing garage door, keeping children and pets safe.\u003c\/p\u003e\n\u003cp\u003eIf your Safe-T-Beam system has been damaged, a replacement kit is essential to continue safe operation of your garage door opener. This kit is compatible with Genie-only garage door openers manufactured since 1993 that use required safety beams. \u003c\/p\u003e\n\u003cp\u003eOnce installed, your replacement Safe-T-Beams are self-diagnostic and will alert you in the event of any malfunction. Don’t leave safety up to chance – replace your safety beams with this kit today.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement Kit. Replaces broken or faulty safety beams in your Genie garage door opener’s Safe-T-Beam system.\u003c\/li\u003e\n\u003cli\u003eWorks with Many Genie Openers. Compatible with Genie (only) garage door openers manufactured since 1993 that utilize required safety beams.\u003c\/li\u003e\n\u003cli\u003eKeeps Family and Pets Safe. Places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the infrared beam of light.\u003c\/li\u003e\n\u003cli\u003eSelf-Diagnostic. Alerts you of any malfunction in installation or operation, as an additional safety measure.\u003c\/li\u003e\n\u003cli\u003eEasy Installation. Replacement kit is easy to install, with mounting brackets and hardware included \u003cspan\u003e(does not include bell wire).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent to Genie part numbers 37334R and 37220R\u003c\/li\u003e\n\u003cli\u003eOften Referred to as garage door opener-  photo eyes, electric eyes, safety eyes, and safety sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/safetbeam.pdf?7882351353251902900\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Installation instructions for installing the Safe-T-Beams\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling the 37220R Replacement Safe-T-Beam System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. IMPORTANT INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eMoving Door can cause serious injury or death.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Wall control must be mounted in sight of garage door, at least 5 feet above floor and clear of moving parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Keep people clear of opening while door is moving.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Do Not allow children to play with remote or door opener.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eIf Safety Reverse does not work properly:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Close door, then disconnect opener using manual release handle.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Do Not use remote or door opener.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Refer to Door and Door Opener Owner’s Manuals before attempting any repairs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eElectrical Shock can cause serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Power cord must be unplugged before attaching any wires.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Be sure wire ends do not touch each other or other terminals.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIf you have questions or if you need a manual, contact the distributor or manufacturer of the opener.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. MOUNTING SOURCE \u0026amp; SENSOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLocations of existing units can be reused if that is desired. Safe-T-Beam® System (STB) Source and Sensor do not have to be mounted on garage door frame. They can be placed anywhere along garage door wall that is convenient for mounting, provided the location meets the following requirements:\u003cbr\u003e1) They must be placed across the door opening,\u003cbr\u003e2) at the proper height,\u003cbr\u003e3) with a clear line of sight between them. (Max. Range is 30 feet).\u003cbr\u003e(They may be mounted on the floor, only as a last resort, if there is\u003cbr\u003eno other option. Not recommended.)\u003c\/p\u003e\n\u003cp\u003e1. To ease mounting, source and sensor units can be detached from the bracket by pulling them apart. After mounting brackets, slide units back onto brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Step_1_medium.png?v=1559219958\" alt=\"Installing Genie Safe-T-Beams replacements instructions Step 1 \"\u003e\u003c\/p\u003e\n\u003cp\u003e2. Ensure there will be an unobstructed path between source and sensor. Sensor should be mounted on the side of the garage door opening that receives the least direct sunlight.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Step_2_medium.png?v=1559220038\" alt=\"Step 2 Replacing the Genie garage door opener Safe-T-Beam system\"\u003e\u003c\/p\u003e\n\u003cp\u003e3. Once the location is established, measure the height of bracket as shown. Hold the bracket in place and mark hole locations. 1\/8\" pilot holes are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Step_3_medium.png?v=1559220101\" alt=\"Installation of Safe-T-Beams for Genie garage door openers Height instructions\"\u003e\u003c\/p\u003e\n\u003cp\u003e*No height adjustment is needed for units mounted on floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. WIRE RUN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReuse of existing wiring is easiest and recommended unless it is broken, cut, frayed or there is a problem. If you can reuse existing wiring — SKIP FORWARD TO STEP 4. If new wiring must be installed, the path shown below is recommended.\u003c\/p\u003e\n\u003cp\u003e1. Route two (2) lengths of two (2) conductor wire (See above) from opener, along top of rail.\u003cbr\u003eFasten wire to rail.\u003cbr\u003e— Evenly space fasteners along rail.\u003cbr\u003eFasten to header and wall (preferably with insulated staples). Allow for some slack at the source and sensor units and cut off any excess wire.\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Wire_Run_medium.png?v=1559220300\" alt=\"Genie replacement Safe-T-Beams installing the wiring \"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eCAUTION: When using insulated staples, be aware that staples which are too tight can cut or pinch wires. Cut or pinched wires can cause the Safe-T-Beam® System to stop working. When using insulated staples, make sure you fasten them only as tightly as needed to hold the wire snugly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e2. At source and sensor, route wires through bracket as shown and attach wires at terminals. Either wire to either terminal (non-polar).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_No_Polarity_medium.png?v=1559220387\" alt=\"Genie 37220R Safe-T-Beam replacement wiring \"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e3. If installing new wiring:\u003cbr\u003eAt opener, twist striped wires together. Twist plain wires together. Feed down through control wire tube “chimney” at top of opener.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_wire_tube_medium.png?v=1559220529\" alt=\"Genie garage door opener power head Wire tube for Safe-T-Beam wiring \"\u003e\u003c\/p\u003e\n\u003cp\u003e4. Attach to terminals #1 and #2 (again either wire). Bundle excess wire and tape to top of power head.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_terminals_medium.png?v=1559220587\" alt=\"Genie replacement Safe-T-Beam system wiring to the terminals \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. SAFE-T-BEAM® SYSTEM TEST\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSafe-T-Beam® System must be installed and working properly in order for door opener to function.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eCAUTION: During testing of the Safe-T-Beam® System, be sure to stay clear of the door and any moving parts. It is preferable to use a long-handled object to interrupt the beam during tests.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Start door moving in close direction.\u003c\/p\u003e\n\u003cp\u003e2. Pass an object through the path of the Safe-T-Beam® System in order to interrupt beam.\u003cbr\u003e— Door should stop and reverse direction to fully open position.\u003c\/p\u003e\n\u003cp\u003eIf door will not run in closed direction, check for these or see chart below:\u003cbr\u003e• Misalignment of Safe-T-Beam® System (Red LED on source unit will be blinking).\u003cbr\u003e• Obstruction in path of beam.\u003cbr\u003e• Pinched or broken wire.\u003cbr\u003e• Loose wiring connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting Guide \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGenie Safe-T-Beam System Self Diagnostic Troubleshooting \u003c\/p\u003e\n\u003ctable style=\"width: 536px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eSource (RED LED) \u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eSource (Green LED)\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003ePossible Problem \u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003eSolution \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003eNormal Operation \u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003eNone Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Powerhead not powered \u003c\/p\u003e\n\u003cp\u003e•Wiring from Powerhead bad\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e\n\u003cp\u003e•Check breakers, fuses, plugs\u003c\/p\u003e\n\u003cp\u003e•Check wiring for obvoious shorts \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Wiring to source missing or bad\u003c\/p\u003e\n\u003cp\u003e•Power has been interrupted\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Check Wiring                                  •Remove power and reapply \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e2 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Beam not aligned                   \u003c\/p\u003e\n\u003cp\u003e•Beam obstructed                   •Sensor defective \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e\n\u003cp\u003e•Check Source, sensor alignment\u003c\/p\u003e\n\u003cp\u003e•Check for obstruction          \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e2 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Wire to sensor missing or bad\u003c\/p\u003e\n\u003cp\u003e•Sensor defective\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Check Wiring                             \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e3 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e•Sensor receiving interference\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Find source of interference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e3 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Source not sending pulses\u003c\/p\u003e\n\u003cp\u003e•Source defective \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Contact Customer service \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you still have a problem, contact Customer Service at 1-800-35-GENIE.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_warning_medium.png?v=1559220809\" alt=\"Safe-T-Beam Warning \"\u003e\u003c\/p\u003e\n\u003cp\u003eORDERING INFO:\u003cbr\u003eTo order wire use the following part numbers:\u003c\/p\u003e\n\u003cp\u003eSafe-T-Beam wiring- part number \u003ca href=\"https:\/\/store.geniecompany.com\/collections\/wire-wire-clips\/products\/bell-wire\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e35265A.S and 35265B.S\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/collections\/wire-wire-clips\/products\/bell-wire\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_wire_ordering_medium.png?v=1559220848\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eDiagnostic Troubleshooting\u003c\/h5\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/stbdiagnostic2.jpg?6638189643415955466\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg alt=\"Genie Safe-T-Beam System Self Diagnostic troubleshooting Guide\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/stbdiagnostic2_large.jpg?v=1531249174\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSafe-T-Beam technology uses a continuous infrared \u003c\/span\u003e\u003cem class=\"rn_Highlight\"\u003ebeam\u003c\/em\u003e\u003cspan\u003e that projects across the interior of the garage door opening to a receiver at all times. In order for your garage door to operate, the \u003c\/span\u003e\u003cem class=\"rn_Highlight\"\u003ebeam\u003c\/em\u003e\u003cspan\u003e must be located at least five inches, but no more than six inches, from the floor, and it should be aligned so that the sensors “see” each other. During closing, if the \u003c\/span\u003e\u003cem class=\"rn_Highlight\"\u003ebeam\u003c\/em\u003e\u003cspan\u003e is interrupted by a person, animal or object, Safe-T-Beam automatically raises the garage door to protect whatever is in its path. Please note that the garage door opener will not close the door unless Safe-T-Beam® is installed and working properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2017-04-26T16:21:53-04:00","created_at":"2017-04-03T15:51:25-04:00","vendor":"The Genie Company","type":"Sensors","tags":["Safety Beams"],"price":4199,"price_min":4199,"price_max":4199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36157483907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"37220R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Safe-T-Beam® Garage Door Opener Safety Sensors","public_title":null,"options":["Default Title"],"price":4199,"weight":227,"compare_at_price":null,"inventory_quantity":965,"inventory_management":"shopify","inventory_policy":"deny","barcode":"050049017514"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/37334R-04.jpg?v=1558531778","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Untitled_design.png?v=1558531778","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/beams_with_bike.jpg?v=1579625079","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Safety-Beams_84e8e48d-62c1-4a1a-8c8e-c2b2f424ccde.jpg?v=1579625079"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/37334R-04.jpg?v=1558531778","options":["Title"],"media":[{"alt":"Genie garage door opener replacement Safe-T-Beams, safety eyes part number 37220R","id":60412756083,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/37334R-04.jpg?v=1568743188"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/37334R-04.jpg?v=1568743188","width":1500},{"alt":"Genie garage door opener brand safe-t-beams, infared security eyes stop the door from closing if something is in the way","id":60412788851,"position":2,"preview_image":{"aspect_ratio":1.501,"height":933,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Untitled_design.png?v=1568743188"},"aspect_ratio":1.501,"height":933,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Untitled_design.png?v=1568743188","width":1400},{"alt":"Genies replacement Safe-T-Beams, diagnostic blinking sensors, comes with both the red and green beam","id":60412854387,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/beams_with_bike.jpg?v=1568743188"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/beams_with_bike.jpg?v=1568743188","width":1500},{"alt":"Prevent accidents with Genies replacement Safe-T-Beam garage door opener sensors ","id":60412887155,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Safety-Beams_84e8e48d-62c1-4a1a-8c8e-c2b2f424ccde.jpg?v=1568743188"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Safety-Beams_84e8e48d-62c1-4a1a-8c8e-c2b2f424ccde.jpg?v=1568743188","width":1000}],"content":"\u003cp\u003eGenies Safe-T-Beam system is designed to ensure maximum safety for your garage door opener operation. Using an invisible infrared beam across the opening of the door, the Genie garage door safety sensor detects any object passing through the LED beam of light and automatically reverses the closing garage door, keeping children and pets safe.\u003c\/p\u003e\n\u003cp\u003eIf your Safe-T-Beam system has been damaged, a replacement kit is essential to continue safe operation of your garage door opener. This kit is compatible with Genie-only garage door openers manufactured since 1993 that use required safety beams. \u003c\/p\u003e\n\u003cp\u003eOnce installed, your replacement Safe-T-Beams are self-diagnostic and will alert you in the event of any malfunction. Don’t leave safety up to chance – replace your safety beams with this kit today.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement Kit. Replaces broken or faulty safety beams in your Genie garage door opener’s Safe-T-Beam system.\u003c\/li\u003e\n\u003cli\u003eWorks with Many Genie Openers. Compatible with Genie (only) garage door openers manufactured since 1993 that utilize required safety beams.\u003c\/li\u003e\n\u003cli\u003eKeeps Family and Pets Safe. Places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the infrared beam of light.\u003c\/li\u003e\n\u003cli\u003eSelf-Diagnostic. Alerts you of any malfunction in installation or operation, as an additional safety measure.\u003c\/li\u003e\n\u003cli\u003eEasy Installation. Replacement kit is easy to install, with mounting brackets and hardware included \u003cspan\u003e(does not include bell wire).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent to Genie part numbers 37334R and 37220R\u003c\/li\u003e\n\u003cli\u003eOften Referred to as garage door opener-  photo eyes, electric eyes, safety eyes, and safety sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/safetbeam.pdf?7882351353251902900\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Installation instructions for installing the Safe-T-Beams\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling the 37220R Replacement Safe-T-Beam System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. IMPORTANT INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eMoving Door can cause serious injury or death.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Wall control must be mounted in sight of garage door, at least 5 feet above floor and clear of moving parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Keep people clear of opening while door is moving.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Do Not allow children to play with remote or door opener.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eIf Safety Reverse does not work properly:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Close door, then disconnect opener using manual release handle.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Do Not use remote or door opener.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Refer to Door and Door Opener Owner’s Manuals before attempting any repairs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eElectrical Shock can cause serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Power cord must be unplugged before attaching any wires.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Be sure wire ends do not touch each other or other terminals.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIf you have questions or if you need a manual, contact the distributor or manufacturer of the opener.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. MOUNTING SOURCE \u0026amp; SENSOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLocations of existing units can be reused if that is desired. Safe-T-Beam® System (STB) Source and Sensor do not have to be mounted on garage door frame. They can be placed anywhere along garage door wall that is convenient for mounting, provided the location meets the following requirements:\u003cbr\u003e1) They must be placed across the door opening,\u003cbr\u003e2) at the proper height,\u003cbr\u003e3) with a clear line of sight between them. (Max. Range is 30 feet).\u003cbr\u003e(They may be mounted on the floor, only as a last resort, if there is\u003cbr\u003eno other option. Not recommended.)\u003c\/p\u003e\n\u003cp\u003e1. To ease mounting, source and sensor units can be detached from the bracket by pulling them apart. After mounting brackets, slide units back onto brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Step_1_medium.png?v=1559219958\" alt=\"Installing Genie Safe-T-Beams replacements instructions Step 1 \"\u003e\u003c\/p\u003e\n\u003cp\u003e2. Ensure there will be an unobstructed path between source and sensor. Sensor should be mounted on the side of the garage door opening that receives the least direct sunlight.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Step_2_medium.png?v=1559220038\" alt=\"Step 2 Replacing the Genie garage door opener Safe-T-Beam system\"\u003e\u003c\/p\u003e\n\u003cp\u003e3. Once the location is established, measure the height of bracket as shown. Hold the bracket in place and mark hole locations. 1\/8\" pilot holes are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Step_3_medium.png?v=1559220101\" alt=\"Installation of Safe-T-Beams for Genie garage door openers Height instructions\"\u003e\u003c\/p\u003e\n\u003cp\u003e*No height adjustment is needed for units mounted on floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. WIRE RUN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReuse of existing wiring is easiest and recommended unless it is broken, cut, frayed or there is a problem. If you can reuse existing wiring — SKIP FORWARD TO STEP 4. If new wiring must be installed, the path shown below is recommended.\u003c\/p\u003e\n\u003cp\u003e1. Route two (2) lengths of two (2) conductor wire (See above) from opener, along top of rail.\u003cbr\u003eFasten wire to rail.\u003cbr\u003e— Evenly space fasteners along rail.\u003cbr\u003eFasten to header and wall (preferably with insulated staples). Allow for some slack at the source and sensor units and cut off any excess wire.\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_Wire_Run_medium.png?v=1559220300\" alt=\"Genie replacement Safe-T-Beams installing the wiring \"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eCAUTION: When using insulated staples, be aware that staples which are too tight can cut or pinch wires. Cut or pinched wires can cause the Safe-T-Beam® System to stop working. When using insulated staples, make sure you fasten them only as tightly as needed to hold the wire snugly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e2. At source and sensor, route wires through bracket as shown and attach wires at terminals. Either wire to either terminal (non-polar).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_No_Polarity_medium.png?v=1559220387\" alt=\"Genie 37220R Safe-T-Beam replacement wiring \"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e3. If installing new wiring:\u003cbr\u003eAt opener, twist striped wires together. Twist plain wires together. Feed down through control wire tube “chimney” at top of opener.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_wire_tube_medium.png?v=1559220529\" alt=\"Genie garage door opener power head Wire tube for Safe-T-Beam wiring \"\u003e\u003c\/p\u003e\n\u003cp\u003e4. Attach to terminals #1 and #2 (again either wire). Bundle excess wire and tape to top of power head.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_terminals_medium.png?v=1559220587\" alt=\"Genie replacement Safe-T-Beam system wiring to the terminals \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. SAFE-T-BEAM® SYSTEM TEST\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSafe-T-Beam® System must be installed and working properly in order for door opener to function.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eCAUTION: During testing of the Safe-T-Beam® System, be sure to stay clear of the door and any moving parts. It is preferable to use a long-handled object to interrupt the beam during tests.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Start door moving in close direction.\u003c\/p\u003e\n\u003cp\u003e2. Pass an object through the path of the Safe-T-Beam® System in order to interrupt beam.\u003cbr\u003e— Door should stop and reverse direction to fully open position.\u003c\/p\u003e\n\u003cp\u003eIf door will not run in closed direction, check for these or see chart below:\u003cbr\u003e• Misalignment of Safe-T-Beam® System (Red LED on source unit will be blinking).\u003cbr\u003e• Obstruction in path of beam.\u003cbr\u003e• Pinched or broken wire.\u003cbr\u003e• Loose wiring connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting Guide \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGenie Safe-T-Beam System Self Diagnostic Troubleshooting \u003c\/p\u003e\n\u003ctable style=\"width: 536px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eSource (RED LED) \u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eSource (Green LED)\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003ePossible Problem \u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003eSolution \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003eNormal Operation \u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003eNone Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Powerhead not powered \u003c\/p\u003e\n\u003cp\u003e•Wiring from Powerhead bad\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e\n\u003cp\u003e•Check breakers, fuses, plugs\u003c\/p\u003e\n\u003cp\u003e•Check wiring for obvoious shorts \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Wiring to source missing or bad\u003c\/p\u003e\n\u003cp\u003e•Power has been interrupted\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Check Wiring                                  •Remove power and reapply \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e2 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Beam not aligned                   \u003c\/p\u003e\n\u003cp\u003e•Beam obstructed                   •Sensor defective \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e\n\u003cp\u003e•Check Source, sensor alignment\u003c\/p\u003e\n\u003cp\u003e•Check for obstruction          \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e2 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eOFF\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Wire to sensor missing or bad\u003c\/p\u003e\n\u003cp\u003e•Sensor defective\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Check Wiring                             \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e3 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e•Sensor receiving interference\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Find source of interference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 88px;\"\u003e3 Blinks, Pause (Repeat)\u003c\/td\u003e\n\u003ctd style=\"width: 73px;\"\u003eON\u003c\/td\u003e\n\u003ctd style=\"width: 224.83px;\"\u003e\n\u003cp\u003e•Source not sending pulses\u003c\/p\u003e\n\u003cp\u003e•Source defective \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 134.17px;\"\u003e•Contact Customer service \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you still have a problem, contact Customer Service at 1-800-35-GENIE.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_warning_medium.png?v=1559220809\" alt=\"Safe-T-Beam Warning \"\u003e\u003c\/p\u003e\n\u003cp\u003eORDERING INFO:\u003cbr\u003eTo order wire use the following part numbers:\u003c\/p\u003e\n\u003cp\u003eSafe-T-Beam wiring- part number \u003ca href=\"https:\/\/store.geniecompany.com\/collections\/wire-wire-clips\/products\/bell-wire\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e35265A.S and 35265B.S\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/collections\/wire-wire-clips\/products\/bell-wire\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/37220R_Genie_Safe-T-Beam_Replacement_Instructions_wire_ordering_medium.png?v=1559220848\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eDiagnostic Troubleshooting\u003c\/h5\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/stbdiagnostic2.jpg?6638189643415955466\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg alt=\"Genie Safe-T-Beam System Self Diagnostic troubleshooting Guide\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/stbdiagnostic2_large.jpg?v=1531249174\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSafe-T-Beam technology uses a continuous infrared \u003c\/span\u003e\u003cem class=\"rn_Highlight\"\u003ebeam\u003c\/em\u003e\u003cspan\u003e that projects across the interior of the garage door opening to a receiver at all times. In order for your garage door to operate, the \u003c\/span\u003e\u003cem class=\"rn_Highlight\"\u003ebeam\u003c\/em\u003e\u003cspan\u003e must be located at least five inches, but no more than six inches, from the floor, and it should be aligned so that the sensors “see” each other. During closing, if the \u003c\/span\u003e\u003cem class=\"rn_Highlight\"\u003ebeam\u003c\/em\u003e\u003cspan\u003e is interrupted by a person, animal or object, Safe-T-Beam automatically raises the garage door to protect whatever is in its path. Please note that the garage door opener will not close the door unless Safe-T-Beam® is installed and working properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}

Safe-T-Beam® Garage Door Opener Safety Sensors

Product Description
$41.99
Maximum quantity available reached.

Genies Safe-T-Beam system is designed to ensure maximum safety for your garage door opener operation. Using an invisible infrared beam across the opening of the door, the Genie garage door safety sensor detects any object passing through the LED beam of light and automatically reverses the closing garage door, keeping children and pets safe.

If your Safe-T-Beam system has been damaged, a replacement kit is essential to continue safe operation of your garage door opener. This kit is compatible with Genie-only garage door openers manufactured since 1993 that use required safety beams. 

Once installed, your replacement Safe-T-Beams are self-diagnostic and will alert you in the event of any malfunction. Don’t leave safety up to chance – replace your safety beams with this kit today.

  • Replacement Kit. Replaces broken or faulty safety beams in your Genie garage door opener’s Safe-T-Beam system.
  • Works with Many Genie Openers. Compatible with Genie (only) garage door openers manufactured since 1993 that utilize required safety beams.
  • Keeps Family and Pets Safe. Places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the infrared beam of light.
  • Self-Diagnostic. Alerts you of any malfunction in installation or operation, as an additional safety measure.
  • Easy Installation. Replacement kit is easy to install, with mounting brackets and hardware included (does not include bell wire).
  • Equivalent to Genie part numbers 37334R and 37220R
  • Often Referred to as garage door opener-  photo eyes, electric eyes, safety eyes, and safety sensors

  

 California Residents: Proposition 65 WARNING

Sku: 37220R

 PDF Installation instructions for installing the Safe-T-Beams

Installing the 37220R Replacement Safe-T-Beam System

1. IMPORTANT INFORMATION

WARNING

Moving Door can cause serious injury or death.

• Wall control must be mounted in sight of garage door, at least 5 feet above floor and clear of moving parts.
• Keep people clear of opening while door is moving.
• Do Not allow children to play with remote or door opener.

If Safety Reverse does not work properly:
• Close door, then disconnect opener using manual release handle.
• Do Not use remote or door opener.
• Refer to Door and Door Opener Owner’s Manuals before attempting any repairs.

Electrical Shock can cause serious injury or death.
• Power cord must be unplugged before attaching any wires.
• Be sure wire ends do not touch each other or other terminals.
If you have questions or if you need a manual, contact the distributor or manufacturer of the opener.

2. MOUNTING SOURCE & SENSOR

Locations of existing units can be reused if that is desired. Safe-T-Beam® System (STB) Source and Sensor do not have to be mounted on garage door frame. They can be placed anywhere along garage door wall that is convenient for mounting, provided the location meets the following requirements:
1) They must be placed across the door opening,
2) at the proper height,
3) with a clear line of sight between them. (Max. Range is 30 feet).
(They may be mounted on the floor, only as a last resort, if there is
no other option. Not recommended.)

1. To ease mounting, source and sensor units can be detached from the bracket by pulling them apart. After mounting brackets, slide units back onto brackets.

Installing Genie Safe-T-Beams replacements instructions Step 1

2. Ensure there will be an unobstructed path between source and sensor. Sensor should be mounted on the side of the garage door opening that receives the least direct sunlight.

Step 2 Replacing the Genie garage door opener Safe-T-Beam system

3. Once the location is established, measure the height of bracket as shown. Hold the bracket in place and mark hole locations. 1/8" pilot holes are recommended.

Installation of Safe-T-Beams for Genie garage door openers Height instructions

*No height adjustment is needed for units mounted on floor.

3. WIRE RUN

Reuse of existing wiring is easiest and recommended unless it is broken, cut, frayed or there is a problem. If you can reuse existing wiring — SKIP FORWARD TO STEP 4. If new wiring must be installed, the path shown below is recommended.

1. Route two (2) lengths of two (2) conductor wire (See above) from opener, along top of rail.
Fasten wire to rail.
— Evenly space fasteners along rail.
Fasten to header and wall (preferably with insulated staples). Allow for some slack at the source and sensor units and cut off any excess wire.
Genie replacement Safe-T-Beams installing the wiring

 

CAUTION: When using insulated staples, be aware that staples which are too tight can cut or pinch wires. Cut or pinched wires can cause the Safe-T-Beam® System to stop working. When using insulated staples, make sure you fasten them only as tightly as needed to hold the wire snugly.

2. At source and sensor, route wires through bracket as shown and attach wires at terminals. Either wire to either terminal (non-polar).

Genie 37220R Safe-T-Beam replacement wiring

 

3. If installing new wiring:
At opener, twist striped wires together. Twist plain wires together. Feed down through control wire tube “chimney” at top of opener.

Genie garage door opener power head Wire tube for Safe-T-Beam wiring

4. Attach to terminals #1 and #2 (again either wire). Bundle excess wire and tape to top of power head.

Genie replacement Safe-T-Beam system wiring to the terminals

4. SAFE-T-BEAM® SYSTEM TEST

Safe-T-Beam® System must be installed and working properly in order for door opener to function.

CAUTION: During testing of the Safe-T-Beam® System, be sure to stay clear of the door and any moving parts. It is preferable to use a long-handled object to interrupt the beam during tests.

1. Start door moving in close direction.

2. Pass an object through the path of the Safe-T-Beam® System in order to interrupt beam.
— Door should stop and reverse direction to fully open position.

If door will not run in closed direction, check for these or see chart below:
• Misalignment of Safe-T-Beam® System (Red LED on source unit will be blinking).
• Obstruction in path of beam.
• Pinched or broken wire.
• Loose wiring connection.

Troubleshooting Guide 

Genie Safe-T-Beam System Self Diagnostic Troubleshooting 

Source (RED LED)  Source (Green LED) Possible Problem  Solution 
ON ON Normal Operation  None Required
OFF OFF

•Powerhead not powered 

•Wiring from Powerhead bad

•Check breakers, fuses, plugs

•Check wiring for obvoious shorts 

OFF ON

•Wiring to source missing or bad

•Power has been interrupted

•Check Wiring                                  •Remove power and reapply 
2 Blinks, Pause (Repeat) ON

•Beam not aligned                   

•Beam obstructed                   •Sensor defective 

•Check Source, sensor alignment

•Check for obstruction          

2 Blinks, Pause (Repeat) OFF

•Wire to sensor missing or bad

•Sensor defective

•Check Wiring                             
3 Blinks, Pause (Repeat) ON •Sensor receiving interference •Find source of interference
3 Blinks, Pause (Repeat) ON

•Source not sending pulses

•Source defective 

•Contact Customer service 

If you still have a problem, contact Customer Service at 1-800-35-GENIE.

Safe-T-Beam Warning

ORDERING INFO:
To order wire use the following part numbers:

Safe-T-Beam wiring- part number 35265A.S and 35265B.S

 

Genie Safe-T-Beam System Self Diagnostic troubleshooting Guide

 

Safe-T-Beam technology uses a continuous infrared beam that projects across the interior of the garage door opening to a receiver at all times. In order for your garage door to operate, the beam must be located at least five inches, but no more than six inches, from the floor, and it should be aligned so that the sensors “see” each other. During closing, if the beam is interrupted by a person, animal or object, Safe-T-Beam automatically raises the garage door to protect whatever is in its path. Please note that the garage door opener will not close the door unless Safe-T-Beam® is installed and working properly.

Questions & Answers

Ask a Question
  • Just want to confirm these are compatible with model H4000-07/M?

    Yes, these Safe-T-Beam sensors will work with the H4000-07/M model. 

  • Are these compatible with Model 1024 Genie Pro? Thanks.

    Yes, the Genie Sate-T-Beam Sensors (37220R) will work with the 1024 model Genie.

  • Confirming this is compatible with Silentmax 1000, model 3042?

    Yes they are. 

  • Will they work with Pro Max PMX500IC/B. Receiver Model: ACSR1?

    Yes, these safety beams will work with the PMX500IC/B models. 

  • Are they compatible with the Genie Excellerator Opener

    Yes these will work with The Genie Excelerator models. 

  • Are these compatible with Model #ISD995 (Genie Excelerator)?

    Yes they are. 

  • I, as well, would like to confirm this will work with my H6000-07M. Thank you...

    Yes they will! 

  • Will they work with the powerlift 900

    Yes they will!

  • is this compatible with model isl950/a

    Yes they are! 

  • Are these compatible with Model #2024?

    Yes, they are! 

  • Will they work with model #2020L

    Yes! The Safe-T-Beam Sensors will work with the Genie model 2020L garage door opener. 

  • Will these work with the IS/550 opener

    Yes, these will work with the IS550 garage door opener. 

  • will these Safe-T-Beam sensors work on H4000 A

    Yes, they will! 

  • Will these work for Relia G 650?

    Yes, they will! 

  • Will this work for a 1/2 H.P. Model PCG650?

    Yes, they will. 

  • Will these sensors work with Model #H600A?

    Yes, they will! 

  • Are these sensors compatible with Overhead Door Model: 696CD/B?

    Yes, they are! 

  • Are these sensors compatible with the H8000-07/M opener?

    Yes, they are! 

  • Will these work for Residential Door 1/2 H.P. Model IMS 1000/A; Receiver model ACSR3G?

    Yes, they will. 

  • the red led flash twice and repeat on STB sensor what is the problem

    This usually means they are misaligned. You will want to make sure the green light is on and make sure they did not get bumped. For assistance call 1.800.354.3643. 

  • Will sensors be compatible with genie 900 power lift

    Yes, they are! 

  • Will these work on intelli g 1200 And can I order just two green ones

    Yes, they will work. They come with one red and one green. 

  • Will sensor PN 37334R work with Genie Model GXL9500?

    Yes, it will. 

  • Will these work with a Genie model IS550/A?

    Yes, they will! 

  • will these sensors work on model 2060l-07 model

    Yes, they will! 

  • Just want to confirm these are compatible with model H4000-A2?

    Yes, they are! 

  • will these sensors work on a chamberlain unit

    No, they will not. 

  • Is this one sensor, or is it a set of two sensors?

    This comes with two, the one with the red light and the one with the green light. 

  • will these Safe-T-Beam sensors work on GPS1200IC

    Yes, they will!

  • Do these work with Model #isd990

    Yes, they do.

  • will this unit work with GPS-1C SERIES.PMX-1C B SERIES?

    Yes, these Safe-T-Beams will work with the GPS-IC and PMXIC/B series garage door openers.

  • Are these sensors compatible with Genie Bluemax?

    They are as long as you have the plugs for the safe-t-beams that originally came with the BlueMax opener.

  • will these sensors work with th modelIs550/A

    Yes, they will!

  • Are these compatible with Model H6000A?

    Yes, they are.

  • We have a G5000 and need new beams will these work as replacements

    Yes, these will work as long as you have the plugs that were on the old safe-t-beams.

  • I would like to order Genies Safe-T-Beam sensor to replace my faulty sensor . is 1 unit in the quantity is 1 pair of sensors or just 1 sensor?

    This is a pair, so you will get 2 sensors, one with the red light and one with the green.

  • Can the safe-t-bean work with a Lift Master Formula 1?

    No, these will not work with Liftmaster brand garage door openers.

  • I have a couple of old g5000 1/2 hp screw drive (red case) openers. They work fine, but the wires got broken off right at one of the sensors. Too closed to repair. What do you suggest?

    You can use the new Safe-T-Beam sensors to replace the old ones. You will just use the old wiring and splice where they connected to the old. For more information, please contact Genie customer service at 1-800-354-3643.

  • Just want to confirm these are compatible with model ACSR3G?

    Yes, they are.

  • since the wiring has been massed up, should this kit be connected to terminal/connector 1 and 2? my genie pro has 4 connectors/terminals numbered as 1, 2, 3, and 4 thanks

    This will depend on which model garage door opener you have. Most of the older models, the Safe-T-Beams connected to terminals 3 and 4, newer models, to 1 and 2. You can view your owners manual here for more details, or you can contact our customer service at 1-800-354-3643 for assistance.

  • Will the safe-t-beam work on model H6000A

    Yes, they will.

  • i have a H6000A opener and the red safe T beam is blinking 4 times and the green one is not on. what could be the problem? i've cleaned the lenses and checked the wires.

    If the green one is not on, that will cause the other one with the red light to blink. On the green one, it could be either that the safe-t-beam is bad, or that the wire to the green one is broken or bad. The best way to check the wiring would be to take the red one off the wires it is attached to, and hook the green one up to those wires. If it lights up, then the wire to the green one is not working or broken, if it does not light up, then the safe-t-beams will need to be replaced.

  • Will this work with my gcg350 l garage door opener?

    Yes, these Safe-T-Beams will work with the GCG350.

  • I have a Genie Bluemax CM 7500-S. There are two wires running from the opener to the source unit, and two wires running from the source to the receiver/sensor. The plug ends on the receiver are broken. The wiring diagram in the on-line instruction sheet shows two wires running from the opener to the source and two wires running from the opener to the sensor. Can I install these replacement units and how do I rewire them?

    Yes, you can use these replacement Safe-T-Beams with the CM7500-S model garage door opener. Please contact Genie customer service at 1-800-354-3643 for assistance with the wiring.

  • it work with 1/2 genie hp screw drive

    This depends on the model. Please contact Genie customer service at 1-800-354-3643 for assistance with compatibility.

  • Should the green and red lights flash or just green on the sensors when new ones are installed.

    You should have one solid red light, and one solid green light on the Safe-t-Beams. If the red one is flashing that indicates a problem, obstruction, or that they are misaligned.

  • Will these work on a 1/3 horsepower model pcg450?

    Yes, they will!

  • In the instructions, it says that the sensor unit pulls apart from the bracket, but I have tried and the unit does not separate. I have pulled fairly hard, but I don't want to break the unit. There doesn't seem to be a catch release nor does it mention one in the instructions.

    They do separate, but it does require quite a large amount of force.  We recommend using rubber gloves on both hands and pulling with ample force.  It does kind of feel like it will break but should not break when you are separating. 

  • Hello I have a intellercode model 5550/a and the safety receiver blinks red always opens but when you close it. It starts to close but goes right back to open. Can't find the original style safety sensor. May that be my problem. Thanks for your help Ben

    You can use the Safe-T-Beam diagnostic blinks to help find what the issue is. (found in the details on this page)- or you can contact our customer service at 1-800-354-3643 for troubleshooting assistance.

  • Will these sensors work with the Genie Chainmax 1000?

    Yes! These Safe-T-Beam sensors will work with the Genie ChainMax 1000 model garage door opener.

  • Genie Sate-T-Beam Sensors (37220R): What kind of maximum distance (range) do these sensors have? 30 or so feet ?

    The Safe-T-Beams are only guaranteed at 25 feet, however, they may work greater distances than this.

  • Is this compatible with PCG700ML model?

    Yes! These Safe-T-Beams will work with the PCG700ML model.

  • Will these sensors work with 1/2 hp genie screw door opener model 2 ? I’m not sure what year it was made!

    If the Genie garage door opener currently has Safe-T-Beams, and you are replacing them, these will work. If it does not, and you are trying to add them, we would need to know more about the model you have. Please contact Genie customer service at 1-800-354-3643 for help determining which model you have.

  • Are these sensors compatible with the Genie Intellicode series openers?

    Yes, they are!

  • Will they work with model # TANE FM-102WH-66 33969A UL 0699

    I am not sure what model it is that you have by those numbers. These Safe-T-Beams will work with Genie garage door openers. Please contact Genie customer service at 1-800-354-3643 for assistance with your model number if you have a Genie.

  • Will these work on an Overhead Door Model OCG 750?

    Yes, they will!

  • Are these sensors compatible with Wayne Dalton openers? I have almost no clearance between the garage foundation and the roller tracks. The Genie sensors will fit because their upright profile does not stick out past the roller tracks into the garage door opening. Any other sensors (including Wayne Dalton) stick a couple of inches into the door opening, where the sensors will surely get knocked off. It's because there is concrete right up to the roller tracks with no area wider than the tracks to make room for a sensor to mount.

    No, these will not work with Wayne Dalton garage door openers.

  • are these compatible with model PCG700ML

    Yes, they are.

  • Is this part compatible with the genie professional model 2028? I do not have the part number on the old sensor because the dog chewed it into a million pieces. Thanks in advance

    Sorry to hear your dog used the Safe-T-Beam as a chew toy, but Yes, these Safe-T-Beams sensors will work with the model 2028 garage door openers.

  • I have the Genie SD and bought the Safe-T-Beam. My problem is when I connect the receiver first, I get a green light but as soon as a connect the transmitter, the light on the receiver (green) goes VERY dim and the transmitter has a red blinking light (3x). I've tried literally putting the two devices next to each other to avoid potential interference, signal weakness, or misalignment and the same behavior occurs. Any suggestions would be very much appreciated

    We would need a little more information on which model you are hooking these up to. This will help with troubleshooting. Please contact Genie customer service at 1-800-354-3643.

  • Are these sensors compatible with a model 12a 1/2 go screw drive

    If the Genie had safety beams on it already, these can be used to replace the ones that were on it.

  • Can you install two sets I wanted the put one low as required and one set higher to prevent the opener from closing if my car is not pulled in enough. The required 6 inch height goes under the car and doesn’t see it.

    No. You cannot have to sets of safe-t-beams on one garage door opener.

  • Are these compatible with Genie ProMax PMX300IC/B?

    Yes, they are!

  • Is this compatible with model G5000?

    If you have the plugs that came with the add on Safe-T-Beams for the G5000, then yes you can use these to replace the old ones.

  • I have a circa G5000 1/2 hp screw driven Genie with one sensor with a plug in two wire and the other sensor have two two wire plugins. The instructions for this replacement doesn’t cover this scenario? Please advise.

    You will have to cut the plugs at the end where the safety beams go. You will then use those wires to wrap around the terminals of the new safe-t-beams. For assistance, please contact Genie customer service at 1-800-354-3643.

  • I have a model CM 8600 XL/M , and the sensors are not working properly will the new sensors you have listed work with this models thx much

    Yes, they will!

  • I have a H6000A Genie that uses the square ones. Will these interchange? Have a bracket that holds them and its about 5" from the wall. Do these come with brackets? They don't seam long enough.

    These replacement Safe-T-Beams will work with the H6000A model garage door opener. They do come with the brackets.

  • These are short for my H6000A unit. Will your sensors detach from the bracket where I can use mine? Mine measure 6" from the wall to the center of the eye. These appear to be about 3" to 4". Is it just in the photos??

    They will detach from the bracket.

  • Will these work with a Lift Master door opener?

    No, they will not.

  • Will these work on the Genie Pro Max PMX 300 IC/B? Do the same two wires go into each side?

    Yes, they will!

  • Will these work with genie powermax 1500?

    Yes, they will!

  • Are these compatible with a Pro 88 screw drive, wiring instructions show 6 lugs but the Pro 88 only has 4. The case does say a jumper is inside for infrared safety sensor?

    These will work as long as you have the plug ins for the original safe-t-beams.

  • Just want to confirm these are compatible with model CM8600 - XL/M?

    Yes, they are!

  • I have started having problems with my Genie Intellicode Model ISL 950A Garage door opener. The door opens normally with either the remote or with the button on the hard-wired opener. However, when trying to close the door with either control, it will start down and then almost immediately open again. The only way to close the door is to hold down the button on the hard-wired control until the door closes all the way. Please advise on how to repair this.

    It sounds as if you may have an issue with the safety beams or wiring on your unit. Here are a few things to check. Both of the safety sensors should be lit and solid one red, and one green. If one or both of them are out it is an indication there is a wiring issue. You will want to first be sure the connection on the beams and head are secure. If only one light is off, please disconnect the beam that is not lit and connect it to the wiring on the side that is lit. If the beams light up replace the wiring to the beam on the non-lit side, if not replace the beams. If both are out you will want to short wire the beams directly to the head you will disconnect the beams and wire them to the terminals on the head that they are currently connected to using two short pieces of 18-20 gauge bell wire. If the beams lite up you will need to replace the wiring, if not replace the beams. If one of the beams is blinking please be sure that the lenses are clean, clear from obstructions, and properly aligned. Please count the blink pattern and let us know what the results are. Also, check to see if you can press and hold the wall console in to get the door to close. If you cannot, try removing the safety beam wires from the powerhead, then try constant pressure on the wall console to close the door. If you still cannot, once the safety beams are not wired, this may be a problem with the circuit board.  You can also call 1-800-354-3643 for further assistance.

  • Will the sku 3722r work with a double garage model # 2028?

    Yes, these safe-t-beams will work with the model 2028.

  • Hi. Having problems with Safe T Beam for my 3022 opener (1.5 years old, s/n 170414100768GE). Green LED is steady, but Red transmitter is flashing Red (2 quick flashes). Also on main unit, red round LED is flashing. I've cleaned both sensors, wiring looks OK, and I've tried to re-align but it doesn't help. Is it time to buy new sensors?

    The two light blink pattern on the safe-t-beams indicates the safe-t-beams are not aligned, something is in the way, or that the safe-t-beams are defective. If you have checked the wiring, made sure they are aligned, and that nothing is blocking (cleaned etc.) then you may need to replace the safe-t-beams. If you would like further troubleshooting assistance you can contact our customer service at 1-800-354-3643. 

  • Will these work with a Genie Relia G 850

    Yes, they will!

  • Are these Safe-T-Beam sensors compatible with Genie model 2055?

    Yes, they are.

  • I have an old 1/2 hp Genie Intellicode Model IS550/A model and need new photo eye sensors. What is the part number for this?

    The IS550/A will work with these new style Safe-T-Beams (37220R).

  • are these compatible with genie bluemax 12A model?

    Only if you have the original plugs that came optional for the old safe-t-beams.

  • is this compatible with Genie Model IS525/A Receiver model ACSR3G?

    Yes, these Safe-T-Beams will work with the IS525/A model garage door opener.

  • I have genie powermax 1500 and red T-beam sensor light is gone, so I need to replace it. these 37334R or 37220R works for it?

    Yes, these current Genie safe-t-beams will work with the Powermax 1500 model. (Both the 37334R OR 37220R).

  • I have a 1/2 HP IS550/A model and need new safe T Beams (both the red and green). Will these work?

    Yes, they will.

  • are the safety beam sensor lights supposed to be green, or one red, one green

    There should be one solid red light and one solid green.

  • Will they work with the Aladdin 1020L-390? Thank you

    Yes, they will.

  • both red and green lights are on, but the garage door won't close. please advise

    Are both the red and green lights on and solid, or is the red LED light flashing? When you try to close the door does it start down then stop and go back up, or does it not go down at all? Will it close all the way if you hold pressure on the wall console?

  • I have a Genie SilentMax 1000 Model 3042 opener. When sunlight shines on the sensors the garage door will not shut. What replacement sensor is the best solution?

    Have you tried switching the sides of the current Safe-T-Beams? (moving the red one to where the green is, and green to where the red is). Depending on how the sun is coming into the garage this could resolve the issue.

  • Is this compatible with model 2560?

    Yes, they are.

  • is there a right or left to the censers

    No, it does not matter which sensor is on which side. One has a green LED light and one has a red LEd light, as long as you have one of each they will work.

  • Will sensors work on model 450

    No, they will not.

  • I have an old Genie Excelerator model # ISD 1000. My sensors are not working. Can I replace them and which ones will work with my model. Thank you.

    Yes, they can be replaced with the current Genie Safe-T-Beams.

  • Are they compatible to model G5000CL?

    They will work as long as you have the plugs for the add on safe-t-beams that came with the garage door opener.

  • Will these work on model 3042

    Yes, they will!

  • Will this work on a Bluemax CM 7500-S

    Yes, as long as you have the plugs that came with the unit for the add-on safe-t-beams.

  • Can you add sensors to a Genie model SP 99. I do not know how old it is. Please advise. Thank you.

    You can only add the safe-t-beams to the SP 99 if you have the original plugs for the add on beams that came with that model.

  • Is it possible to add safety sensors to a pre 1993 Genie Model 450?

    No, you cannot add them to the 450 model.

  • are these sensors the right ones for model isl950/a

    Yes, they are!

  • My STB system suddenly started to show obstruction, although there is nothing on the way of the beam. The Genie Screw Drive Door Operator I have is pretty old. It's definitely older than 10 years but maybe as old as of 1987, when the house was built. The manual is for IS, ISL and IC series. In any case, the STB parts look different from your newer ones. I guess, the STB system may need a replacement and I wonder if the new parts are compatible with my door operator. Thanks...

    These are compatible with your IS, ISL, IC series garage door opener. The look/style has changed, but they are compatible.

  • Can I open and close the door without using the sensor beams?

    No, the Safe-T-Beams have to be installed to close the garage door.

  • Is this work to model #1028? Do I need to replace both sensor if only the red side is not working?

    These Safe-T-Beams do work with the 1028 model garage door opener. This will come with both the red and green beam, if you only need to replace the red one, that would be fine.

  • Hi. Are they compatible with genie blue max model 12 a? I did connect them to the opener and no response. Thank you.

    They are as long as you have the plugs for the plugin beams that would have been optional on the Genie BlueMax models. You would have to cut the end of the plugs for the Safe-T-Beam ends and use those wires to wire to these new Safe-T-Beams.

  • Have Genie Pro Screw Drive. Model # CM8600IC/A . Stoped closing from remote but will close when the wired button on garage door is held in until the door fully closes. Opens fine with remote or one push on the wired button. Assume this problem is from faulty sensors but want to confirm before purchasing.

    It sounds as if you may have an issue with the safety beams or wiring on your unit. Here are a few things to check. Both of the safety sensors should be lit and solid one red, and one green. If one or both of them are out it is an indication there is a wiring issue. You will want to first be sure the connection on the beams and head is secure. If only one light is off, please disconnect the beam that is not lit and connect it to the wiring on the side that is lit. If the beams light up replace the wiring to the beam on the non-lit side, if not replace the beams. You can also call 1-800-354-3643 for further assistance.

  • I am looking of replacement sensors for a Genie Pro Max model PMX 500 iC/B garage door opener. This opener was installed in 2002.

    You can use these Genie Safe-T-Beams for th PMX500 IC/B. The are a different shape now, but will operate the same.