Skip to product information
1 of 1

The Genie Company

Motor (800 Series) - 37030A.S

Motor (800 Series) - 37030A.S

Regular price $187.81 USD
Regular price Sale price $187.81 USD
Sale Sold out

Product has been discontinued and is NO LONGER AVAILABLE.

Genie garage door opener replacement motor for the 800 series operator. Compatible models listed below. 

  • Compatible with models: 2022, 2022-700, 2024, 2027, 2042
  • DC24V, G-MOT-DC24H04

SKU: 37030A.S

Sorry, this product is currently out of stock.

ASK A QUESTION View full details
37030A.S Motor
Motor (800 Series) - 37030A.S
$187.81

QUESTIONS & ANSWERS

Ask a Question
  • I have a Genie 2024 model and the motor drive gear is stripped. Is it possible to get just the replacement drive gear inside the motor or even a motor rebuild kit?

    No, there is no separate part for the gear in the motor, you would need the Motor (800 Series) - 37030A.S for Genie model 2024.

  • 2024 Model how many HP?

    The 2024 model was a 1/2 HP garage door opener.

  • I have a Genie 2022 model garage door opener and it needs replacing. Do I need to hardwire a whole new unit through the walls or is there a compatible unit we could essentially "plug-and-play" using the same wall controls?

    Any of the new garage door openers we have would use the same wiring/ wall console that the 2022 model had. You can replace the wall console with the new one that comes with the new units and keep the wiring the same if you would like as well.

  • I just received my garage door opener Genie model number 4062 can you tell me what horsepower motors on it

    The 4062 is rated as 1 HPc.

  • Hp of the 2024

    It was equivalent to 1/2HP.

  • i have the PCG700ML . IS THIS COMPATIBLE

    No, it is not.

  • Can I purchase the main gear for the motor 2024

    We do not sell the gear for inside the motor as a separate part.

  • I need to replace a model 2027. What HP am I replacing? Do I need a 1/2 or 3/4.

    The 2027 model was a 1/2 HP model. You could use another 1/2 HP or higher that would be up to you and verifying the size/ weight of your garage door.

  • how program new remote to crytar II module

    Please contact Genie customer service at 1-800-354-3643 for assistance. We will need some more information to assist you.

  • I have a very old model 800 opener in my rent house

    Please contact Genie customer service at 1-800-354-3643 for assistance. We will need some more information to assist you.

 PDF Instructions for Installation of 37030A.S  Motor Replacement 

37030A.S 800 Series Motor Replacement Instructions

This repair will require removal of the unit from it’s mounting hardware and repair made on a clean work surface. Refer to your owners manual to reverse the wiring, mounting, and assembly process. READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS AND WARNINGS CONTAINED IN THESE INSTRUCTIONS AND THE OWNERS MANUAL. If you have any questions or do not understand an instruction, contact a trained service technician. Or call 800-354-3643.

WARNING
BE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE INPUT POWER LINES PRIOR TO REMOVING THE MOTOR COVER.

WARNING
ANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION.

 

 1. Before pulling the emergency release cord, make certain people and objects are clear of the garage door opening. Pull emergency release cord on the carriage to disengage opener to close the door if necessary. (If unable to lower door using opener, use extreme caution manually closing the door.

2. Remove power from garage door opener.

3. Remove lens cover(s) by pressing side tabs inward and remove light bulb(s). FIG. 1.

Genie 600/800 Series motor replacement instructions firgure 1

4. Remove wall console and Safe-T-Beam® wires from the terminal block located on the back of opener FIG. 1. Use a small common screwdriver to press in on orange locking clips while gently pulling wires from the block. Mark wires to help facilitate replacement.

5. Remove door arm clevis pin and cotter-hairpin to disconnect the operator from the door. FIG. 2.

Genie 600/800 Motor replacement instructions figure 2

6. Remove the garage door opener from mounting brackets and hardware and set on a clean work surface (or the floor).

7. Remove 3 bolts from rail assembly and set rail aside. FIG. 1.

8. Remove 2 screws securing circuit board to powerhead cover. FIG. 3.

Genie Motor replacement for 600/800 series instructions figure 3

Genie Motor replacement 36447A.S figure 4

9. Lower the circuit board assembly to access the control board and wire harnesses.

10. Note locations and unplug wire harnesses from the control board. FIG. 5.
• OPTO, LIGHTS, MOTOR, TRANSFORMER HARNESSES

Genie 36447A.S Motor replacement instructions figure 5

11. Remove 4 screws securing the cover and remove the cover. FIG. 6.

Genie 36447A.S Motor replacement instructions figure 6

12. Remove 3 screws at top of the powerhead to remove the motor. FIG. 7.

Genie 36447A.S Motor replacement instructions figure 7

13. Install replacement 37030A.S motor in reverse order.

14. Replace powerhead cover with 4 screws.

15. Replace circuit board harnesses.

Note: Be certain to install all harnesses in the correct position.

16. Replace circuit board assembly and secure with 2 screws.

17. Install rail assembly to powerhead with 3 bolts.

18. Reinstall powerhead and rail assembly to ceiling and door. Steps 5,4,3.

19. Re-Install the light bulb(s) and lens cover(s).

20. Re-Apply power to the garage door opener.

21. Test the unit fully to ensure travel limits, remote controls, and all safety features are set and work correctly. Use your owners manual and/or assembly poster for reference.

  • Shipping Truck

    Free Shipping

    We offer FREE shipping and handling on all orders that total over $17.99 and are shipped to a US address. All orders are shipped using UPS ground, directly from The Genie Company.

  • Genuine Genie Accessories and Parts

    Genuine Replacements

    Buying GENUINE Genie accessories and parts guarantees that you are getting quality OEM materials backed by a Genie warranty.

  • Customer support chat

    Support

    Need assistance? We are here for you! We offer a wide range of customer support options including contact by phone or email, web chat services with a live agent, and a robust support section also located on our website.  All customer care teams and services are based in the USA.

FREE SHIPPING ON ALL US ORDERS 17.99 AND UP