Skip to product information
1 of 3

The Genie Company

Screw Drive Carriage Assembly with Magnet- 36179R.S

Screw Drive Carriage Assembly with Magnet- 36179R.S

Regular price $20.99 USD
Regular price Sale price $20.99 USD
Sale Sold out
The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage.
  • Works with magnetic or mechanical style limit switches 
  • Lever for emergency release cord to attach to keeps you safe in case of a power outage or other emergency to release the door quickly 
  • The carriage is designed to protect the screw drive from wear and tear
  • Genuine Genie replacement part 
  • The carriage is often referred to as a Genie trolley
  • Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly (check out this blog article with instructions and video here)
  • Direct replacement for previous/ discontinued carriage parts numbers- 36179R, 34107R, 34107R.S, 20414R, 25589R, 25589S
  • This same screw drive carriage was used in many older model Genie garage door openers over the years. See the list below. 
  • Compatible with Models:  1060, 1560, 2560, 3560, 3860, IS525, IS525/B, IS550, IS550/B, IS850, IS900, IS900/B, IS920, CM7500, CM7600, CM8500-S, CM8600, PRO95, CM8600-FN, H4000, H6000, IS525, IS525/B, IS550, IS550/B, IS850, IS900, IS900/B, IS920, 2060L, 3060L, IMS1000, ISL950, ISL950/B, ISL980, ISL980/B,  G4050CL, G5000CL, G5050CL, G5500CL, G5700CL, G8000CL, GX9000CL, GXL9500CL, GXL9550CL, GXL9900CL, GXL1000CL,Excelerator, H8000-07, H8000D, ISD990, ISD995, ISD1000, PRO99-2IC, PRO99FN, CMD9900, 4560, 4060L

SKU: 36179R.S

In Stock! Usually ships within 24 hours.

ASK A QUESTION View full details
Genie Replacement Screw Drive Carriage - Part 36179R.S
Screw Drive Carriage Assembly with Magnet- 36179R.S
$20.99

QUESTIONS & ANSWERS

Ask a Question
  • Is the IS900 the same as IS900/A?

    Yes, the IS900 is the same model as the IS900/A and the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with both these models.

  • Does this screw drive carriage assembly fit on the opener Model # H8000D?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model H8000.

  • Does this fit Genie GXL 9900-2? I need two.

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the Genie model GXL9900-2.

  • Is model IS550 the same as IS550/A

    Yes, the IS550 and the IS550/A are the same model and would use the same carriage Screw Drive Carriage Assembly with Magnet- 36179R.S.

  • I am looking for the springs of the Genie trolley for Model3060L.

    Sorry, there is no replacement for just the springs on the carriage, you would need the complete Screw Drive Carriage Assembly with Magnet- 36179R.S.

  • Is Model ISL950 the same as Model ISL950 A?

    Yes, the ISL950 and the ISL950A are the same models.

  • Does this fit a genie model pro98-s?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the Genie model Pro98-S.

  • does 36179r.s work with model 4062

    No, the 36179R.S is not compatible with Genie model 4062, for 4062 you would need either the carriage 37845R.S or shuttle 36664R.S, see links for the one that best resembles your need.

  • does this one work for a 3062 genie powermax 1200 Screw Drive Carriage Assembly with Magnet- 36179R.S

    No, for the Genie model 3062 you will need either the carriage 37845R.S or shuttle 36664R.S.  Please see both links for pictures of the part that matches your need.

  • I need a Screw Drive Carriage Assembly for a PRO99-IC. I see one for the PRO99-2IC. Will that work for the PRO99-IC?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model PRO99-IC.

  • need a screw drive carriage assy for model is550/a garage door opener

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model IS550/A.

  • need a screw drive assy for a model is550/a garage door opener

    The Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model IS550/A.

  • I have an older model genie door opener model ISL950/A is this compatible for my genie?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model ISL950/A.

  • will this part work with genie model 2562 ?

    No, for Genie model 2562 you would need Carriage 37845R.S or Shuttle 36664R.S. If the teeth on the carriage is stripped or slipping you will likely need the 37845R.S if there is other damage to the parts, please review the pictures of each item and see which closely matches your needs.  Let us know if we can be of further help.

  • Is this available for local pick up?

    No, sorry we do not offer local pickup.

  • Does this part also work on the 2060L model?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model 2060L.

  • Will this work with a genie 1/2 hp 3060l-07

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model 3060L-07.

  • will this work for the h4000a Thanks

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the Genie model H4000A.

  • Is this compatible with the IS550/A

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model IS550/A.

  • I have a is550/A and need a new carriage what is correct part?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model IS550/A.

  • what is screw carriage for Genie Opener Model H6000A? Thx Minh Tran (408) 603-7556

    The Screw Drive Carriage Assembly with Magnet- 36179R.S is the correct compatible replacement carriage for the Genie model H6000A.

  • What is Screw Carriage foe opener model Series IS, ISL, IC H? Thanks Minh (408) 603-7556

    The Screw Drive Carriage Assembly with Magnet- 36179R.S is the compatible carriage for Genie model series IS, ISL, IC H.

  • Is Screw drive assembly 36179R.S compatible with the ISD 99?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the Genie models ISD990, ISD995 ISD1000, H8000, PRO992IC and PRO99FN.

  • Is this part compatible with CM8600ic/a?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model CM8600IC/A.

  • Is this compatible with the model GCG350ML?

    No, this is for another model, unfortunately the carriage for the GCG350ML is no longer available.

  • I have a 1/2 HP Model IS900/A . Will this part Screw Drive Carriage Assembly with Magnet- 36179R.S fit my garage door ?? Thanks.

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model IS900/A.

  • Is it compatible with G-88?

    Sorry, we do not have a G-88 model.  Can you verify this model number to make sure it is correct.  Also, please provide the city, state and zip code where the garage door opener is located so we can assist you further.

  • I have a ISL 950/A and the compatible models shown skip from ISL 950 to ISL 950/B, so I'm worried that it this may not be compatible with my model. Will it work with a ISL 950/A?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the ISL950/A.

  • This looks like the one for CM8500-S, but I don't see it listed. Will it work?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the Genie model CM8500-S.

  • Is this compatible with model H4000A

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model H4000A.

  • Is this part compatible with the excelerator ? I can’t find the model no. of our garage door opener. Please advice. Thank you.

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie Excelerator models.  It is not compatible with Genie Excelerator II models.

  • Is it compatible with a IS900/A

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model IS900/A.

  • Is this compatible with model 4062

    No, the 36179R.S is not compatible with Genie model 4062.  Model 4062 has a carriage and shuttle, you can look and see which matches the part you are looking for.

  • Is this carrier compatible with IS550/A? Thank you.

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the IS550/A.

  • Is this compatible with model pro95IC/A

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S  is compatible with the Genie model PRO95IC/A.

  • Does this work with Isl950/amodel

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S  is compatible with the model ISL950/A.

  • is this compatable with the H8000

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S  is compatible with the H8000.

  • Does this part work for the genie pro max 1/2 Hp MODEL PCG 600 i need the replace carriage pull

    No the carriage 36179R.S is not compatible with the PCG600.  The carrriage for the PCG600 is no longer available and there is no replacement part.  Sorry for the inconvenience.

  • Do I need to grease the new carriage assembly?

    Generally there is enough grease on the rail to lubricate the carriage.  However, if you haven't lubricated the screwdrive in the past year, we would recommend cleaning off the old grease and applying new.  We recommend doing this annually.

  • is this Screw Drive Carriage Assembly with Magnet- 36179R.S works for IS900/A

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with model IS900/A.

  • Hello. i want to know if this piece works for the model 550-A

    Yes the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with an IS550/A.

  • Is this the right carriage for a H4000A ? How do you install this part

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is the correct carriage for the model H4000, you can review instructions below.

    https://store.geniecompany.com/blogs/genie-blog/how-to-replace-the-genie-legacy-screw-drive-carriage-assembly

  • Hi it’s Ron. Will this carriage work with model isl950/a

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S will work with model ISL950/A.

  • I see that this carriage fits the IMS1000. My unit is the IMS1000/A. Will this carriage fit my closer?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with your model IMS1000.

  • Is this part made of plastic or metal ?

    The teeth are made of metal (aluminum) and the rest of the carriage is made of plastic.  The teeth are made of aluminum to prevent damage to the steel screwdrive, in other words the softer metal of the carriage teeth will strip out intentionally in order to save the more expensive screwdrive.  However the carriage should not be stripping out unless there is a door issue present.  If you door is out of balance this can cause the teeth to wear out prematurely.    You can test the door balance by following these instructions. Put the door to the floor and unlock the carriage from the rail, by pulling the red cord.  Now lift the door up about 3-4 ft and let go. If the door moves up or down more than about a foot, you may need to have the door springs adjusted by a technician. 

    Thanks.

  • I notice on list of models that you list a H6000 but not H6000A which is my unit. I bought an aftermarket on Amazon but it did not work. It grinded before it got started and not just where the screw drive meets as mine does. I returned it and reinstalled the one I had there which at least only grinds where the long screws meet. But I know it's just a matter of time. Now I would like to buy OEM from you but want to make sure it will work on my model H6000A. I'd appreciate your response. George

    Yes the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the H6000A.

  • Will part "Screw Drive Carriage Assembly with Magnet- 36179R.S" work with a model 2060 or 3060 Genie screw drive opener?

    Yes, the 36179R.S carriage is compatible with models 2060 amd 3060.

  • Will this product work on model 3060L-07/M?

    Yes, it is compatible.

  • Will this work for ISD-990

    Yes, it is compatible.

  • Will this work for the ISL950/A model?

    Yes the 36179R.S is the correct carriage for model ISL950/A.

  • Will this part work for model IS550/A ?

    Yes, the 36179R.S carriage is compatible with the model IS550/A.

  • I have a genie garage door opener model 4062-TKNMV. I need a new srew drive, what is the part # I need for this unit?

    The model 4062 would use the following parts: 
    Screw Drive Carriage: 37845R.S
    Screw Drive Shuttle: 36664R.S
    Screw Drive Rail: 38244R.S
    Normally the carriage would need to be replaced, not the entire rail. If you need assistance, please contact Genie customer service at 1-800-354-3643.

  • I have a Power Lift 900 Model 2562, will this screw drive work in this unit?

    No this carriage assembly doesn't work on the PowerLift 900 garage door opener, here is the link for the correct carriage assembly 
    https://store.geniecompany.com/collections/carriages/products/screw-drive-carriage-assembly

  • Will this work on model GXL9550

    Yes, it will.

  • To eliminate the squeaking noise when the Garage Door opens and then it does not squeak anymore. To eliminate the noise, I plan to change the Screw Drive Carriage Assembly with Magnet- 36179R.S. However do I need to replace the Rail Assembly also or First Rail Section ?

    You do not have the replace the rail when changing the carriage.

  • where is the model number on the opener?

    The model of the garage door opener is normally under the light bulb cover.

  • will screw drive carriage with magnet 36179rs fit genie modelis 550_A?

    Yes, it will.

  • Will the Screw Drive Carriage Assembly with Magnet- 36179R.S fit Genie model 450?

    No, it will not.

  • Does this work with model 4052 screw drive?

    Can you verify your model number? If it is supposed to be a 4062 - then no, this carriage will not work. You would need the 37845R.S carriage.

  • Does this carriage work for the Stanley SD 550 screw drive garage door opener?

    No, it does not.

  • Does this part work with model ISL950/A?

    Yes, it does!

  • What screw drive carriage do I need for Genie model ACSR3

    The ACSR3 is a receiver number. Can you check the model again on the powerhead. It should be something like GXL 9500, or ISD950, H6000, etc.

  • Will this carriage work with the Pro-88 model?

    Yes, it will.

  • Is this compatible with h2000c? Thank you.

    No, it is not. The H2000C was a ChainGlide model. We no longer have the carriage for that model.

  • Does this carriage work for Genie model 3062?

    No, it does not. The 3062 model garage door opener would use the 37845R.S screw drive carriage.

  • Model sd9000 will it work?

    Yes, it will.

  • Does it fit on a model 9005 1/2 horse

    Yes, it will.

  • Does it work model 7035?

    No. The 7035 model garage door opener would use the 38893R.S model carriage.

  • does this work with model 12A

    The 12A is a receiver number. Can you check your model number? It should be under the light bulb cover or on the rail about twelve inches from the powerhead.

  • Will this fit model ISL950A?

    Yes, it will.

  • Does it work with model isd990?

    Yes, it does.

  • Will this work with Power Lift 900

    No, it will not. The PowerLift 900 model garage door opener uses the 37845R.S screw drive carriage.

  • Does this work with model #2562

    No, it will not. The 2562 uses carriage part number 37845R.S.

  • Does this carriage 36179RS work in place of the genie G-GX-GXL part #25533A I know it’s a old genie but I need a new carriage please answer as soon as possible

    Yes, it will.

  • Does this work with the Pro Max Chain Slide 2 model PCG700ML

    No, it will not. We no longer have the carriage for the PCG700ML model garage door opener.

  • Will this work on model PRO951C

    Yes, it will!

  • Will this work on model ISL950/S

    Yes, it will.

  • Does this part fit for an SD5050 Model? Let me know please.

    Yes, it does.

  • Can I replace the Carriage Assembly (37845R.S) and Shuttle (36664R.S) with the Carriage Assembly (36179R.S) ? It's for a POWERLIFT 900. Thank you

    No, the 36179R.S carriage will not work on the PowerLift 900 model garage door opener.

  • Does this part work with the model POWERLIFT 900?

    No, it will not. The PowerLift 900 uses the 37845R.S carriage.

  • Does this work with Model CM8600-XL/M

    Yes, it does!

  • Will it work for a pro 1024?

    No, it will not.

  • Will this work for 1/2 h.p Model 3060L -07/M

    Yes, it will.

  • Would it fit model H7000-07?

    Yes, it will!

  • Does this work with model 3062

    No, this carriage will not. The 3062 model garage door opener uses the screw drive carriage part number 37845R.S.

  • This is a follow-up to a previous question this afternoon. My opener is a Blue Max build in week 10 1991. I have looked all over and can not fine a model number. It is a screw drive ant the carriage looks JUST like your part number 36179R.S. Can you tell me if this would work? Thanks

    Yes, it will.

  • Does the 36179R.S carriage work with a Blue Max 12a made in 1991? Looks like a exact replacement by the pictures, just want to make sure.

    Yes, this will work with the BlueMax.

  • Does this carriage work with Model SD9000?

    Yes, it does.

  • Hello - Will this work with Genie Mode; IS525/A ? Thank You.

    Yes, it will.

  • Will this work with the Genie Intellicode Chain Glide GCG350? Thank you

    No, it will not. We no longer have the carriage for the GCG350.

  • Will part 36179R replace 37845R.S carriage? This if for a PowerLift 900 model 2562.

    No, the 36179R will not work with the 2562 model. You would need the 37845R.S carriage.

  • Does Genie screw drive carriage replacement trolley work on Stanley garage door opener?

    No, it will not.

  • Will this part work with the ProMax model number PCG650

    No, this is for screw drive models only.

  • I need model #2562 genie carriage screw drive replacement part with the teeth (the part that’s worn out that looks like a track)

    The screw drive carriage replacement for the 2562 model garage door opener is the 37845R.S part number.

  • my model is IS550/A , which screw drive assembly do i need?

    You would need the 36179R.S Screw drive carriage for the IS550/A model.

  • My manual shows model numbers SD2000, 3000 AND 5000. Will the carriage with the magnet shown here work for me? Will i have to take the rail, track and drive down and disassemble it in order to put the carriage on? Thank You...

    Yes, it will. You will need to take the door end of the rail off the wall to replace it.

  • Is this the correct carriage for my opener, Model 2562?

    No, it is not. The 2562 model garage door opener takes the carriage part number 37845R.S.

  • Will this work on a model 12A?

    12A is a reciever number. The model number for your garage door opener should be on the back panel of the powerhead or under the light bulb cover.

  • Will this work for a cm8600-xl/m

    Yes, it will.

  • Will this work with model GCG350ML?

    No, this carriage is for screw drive model garage door openers only. We no longer have the carriage for the GCG350ML.

  • Is this compatible with Pro99-IC?

    Yes, it is!

  • Will this work for z19220 that the only number I see on there plus on rails it say genie pro 1/3 h.p. 8200

    Yes, it will.

  • does this work with genie 5500 model?

    Yes, it will!

  • will this work for a model 2562?

    No, it will not. For the 2562 model garage door opener, you would need the screw drive carriage part number 37845R.S.

  • What part will replace model 450 carriage?

    We no longer have parts for the model 450.

  • Will this part work with very OLD model 450 screw drive?

    No, it will not.

  • Will this part work with a model IS920/A ?

    Yes, it will!

  • Will this fits craftsman part no 41A4315-7?

    No, it will not.

  • Will it work with a 1/3 hp model G8000?

    Yes, it will!

  • will this work with a G5000 ? it was installed in 1995 or 1996

    Yes, it will!

  • Will this work on 1/2 hp genie model # G5050 ?

    Yes, it will!

  • Does this work on a Genie Power Lift 900?

    No, it does not. The Genie Powerlift 900 uses the screw drive carriage part number 37845R.S.

  • Will this work on a model 450

    No, it will not.

  • Does this part work with a Model 404?

    No, it will not.

  • Can this more recnt version of this part be used to replace a broken one on a GENIE E-1/ESR-1 series door operator ?

    Please contact Genie customer service at 1-800-354-3643 to verify your model number.

  • Is this compatible with model ACSR3G?

    The ACSR3G is actually a receiver number. To verify your model number, it should be under the light bulb cover.

  • Will this fit model PRO99-IC?

    Yes, it will!

  • Will this work for a GXL9550

    Yes, it will!

  • Will the part 36179RS work on genie model is900a door opener

    Yes, it will!

  • dose this carriage fit Model SD 5050

    Yes, it will!

  • I have a Genie Excelerator II revolution series, I need a carriage assm, and the drive connection collar and C clip, please help me select the correct parts?

    For the Genie Excelerator II (model 4062)- the correct screw drive carriage part number is 37845R.S. The Collar is part number 19806A04.S, and the clip is 19807A04.S.

  • Will this work with a stanley model sd550?

    No, it will not.

  • Will it fit model ISL 950A

    Yes, it will.

  • Does this part work for Model 2060L-07 model? Looks the same but couldn’t find this model on the website list. If not can you give me a SKU for same part for Model 2060L-07? Thanks

    Yes, this carriage will work with the 2060L-07 model.

  • Does this part work with the Model GXL 9500?

    Yes, it does!

  • Will this work for SD9500

    Yes, it will.

  • Does this work for model IS550/A?

    Yes, it does!

  • I have SD9005. Does this screw drive Carriage work for this model number?

    Yes, it does.

  • This part will work with H4000-07/M ?

    Yes, it will!

  • will this part work with intellicode ISL950/A

    Yes, it will!

  • Does this work with Power lift model 2562?

    No, it will not. The screw drive carriage assembly for the 2562 model is part 37845R.S.

  • Does this part work with the Model SD5050 also?

    Yes, it does.

  • Will this work with a 1/3 hp model cm7500-s?

    Yes, it will.

  • Will this work with 4062?

    No, the 4062 uses the 37845R.S Screw Drive Carriage Assembly.

  • Will this work with my powerlifting 900

    No, it will not. The PowerLift 900 would use the 37845R.S Screw Drive Carriage Assembly.

  • Does the carriage work with a model: IS900A?

    Yes, it does.

  • Will this work with genie model ISL950/A

    Yes, it will!

  • Will this work with model G5500

    Yes, it will.

  • what is the warranty on this part?

    When buying a part or accessory the warranty would be one year.

  • Does the Screw Drive Carriage 3617R.S work for model# CM8500=S?

    Yes, it does.

  • Is this part (Screw Drive Carriage Assembly with Magnet- 36179R.S) compatible with a PRO 88 model ? Thanks for your answer.

    Yes, it is!

  • Will this work on model ISD 990

    Yes, it will!

  • How to adjust the light that comes on when the door is raised or lowered. The light on my opener won't go out. The model is CM7600IC with mechanical limited switches?

    Hi! The constant light could be caused by a few different things. In order to eliminate these, here are a few steps to try. First, you would want to remove the wall button from the wall. Then take the two wires off the back of it and leave them off. You would then want to run the unit with a remote, then wait at least five minutes and the light should time out. If they do go out, you would want to replace the wall console (with a series II 39165R).  If they do not, then you would want to remove the wall button wires from the power head. Again, run the unit with a remote, wait the five minutes and see if they go out. If they do, you would want to replace the wall button wire from the wall button to the power head. (This is 18 to 22 gauge doorbell wire 35265A.S) If they do not go out after both of these then the circuit board would need to be replaced in the unit. For the CM7600IC, this would be the Sequencer Board (20386R.S) that has the relay for the lights. 

    As always, if you need assistance with this troubleshooting, or have any questions, you can contact our Genie customer service at 1-800-354-3643. 

  • Does this part work with Model PMX500ic/B

    No, it will not. Please see our breakdown for the PMX500IC/B model here, and determine by which rail you have. You can also contact our customer service at 1-800-354-3643 for assistance.

  • Does this work with ISL950/A?

    Yes, it does!

  • does this part work with model 1022?

    No, it does not. The carriage for the 1022 is part number 36453A.S.

  • Will this carriage work with Power Lift model number 2562?

    No, it will not. You would need the carriage assembly part number 37845R.S.

  • Need an Up limit switch for Genie Blue MAx CM8500. Do you have it

    You will need the limit switch part number 20113R.S for the Blue Max CM8500.

  • Will this work with imperial 10007 model

    No, it will not.

  • Will this fit model # acsr3g?

    The ACSR3G is a receiver number. To verify your model number, please contact Genie customer service at 1-800-354-3643. We can help determine which garage door opener you have and if it is compatible.

  • Does this part work for the CM8600IC/A model?

    Yes, it will!

  • is this the correct screw drive carriage for model CM 8500-S 1/2 H.P. Genie Blue Max?

    Yes, it is.

  • Will this fit my ISL90/A model

    Yes, it will. 

  • Does this work with GX9000 1/2 HP screw drive model?

    Yes, it does. 

  • Will this work for a SD9000

    Yes, it will!

  • Does this part work with model 2060i-07?

    Yes, it does. 

  • Does it work with MODEL #IS900/A ?

    Yes, it does. 

  • will genie screw drive carriage assembly with magnet 36179R.s work on genie model#1S550-A?

    Yes, it will! 

  • I need the carriage that fits my genie intel—1/2 H.P. model 1000/A genie garage door opener Receiver model ACSR3G. What part should I get? Please advise.

    Yes, this 36179R.S is the correct one. 

  • will this fit the medallion series GLX 10000

    Yes, it will. 

  • Will this assembly work on my model sd 5050?

    Yes, it will. 

  • This item will work with model H6000-07

    Yes, it will. 

  • Will this work on a ISL950/A?

    Yes, it will! 

  • Will this work with the 3060L model?

    Yes, it will! 

  • Will this replace the 34107R carriage part number?

    Yes! This will replace the old carriage part number 34107R.

  • will this carriage work on a model H4000-07/M ?

    Yes it will! 

  • Does this part work with an IMS1000/A?

    Yes it does! 

  • I have a H6000A, but this looks almost exactly like my carriage. will it work with my unit?

    Yes this will work on the H6000A. 

  • does this part work with model H6000-07

    Yes it does. 

  • I have a G 50-50 model I need the trolley for that that

    The below carriage will work with your G5050:
    Genie - Screw Drive Garage Door Opener Carriage Assembly with Magnet – The Genie Company

  • Is IS550Athe same as IS550B for the screw drive carriage assembly

    The Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the IS550A.

  • Is this compatible with Genie SD9500 model?

    Yes it will.

  • Is this part compatible with IS920A?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the IS920A.

  • Will this fit my is550/a model

    Yes. This Carriage will fit the IS550/A model. 

  • Does the 36179R.S Screw Drive Carriage Assembly have plastic or metal teeth?

    The teeth of Screw Drive Carriage Assembly with Magnet- 36179R.S are metal.

  • I have a Genie Excellerator model ISD995 and I need to replace the screw driven carriage... The part number listed in my manual is GER-2 34963R... Is this the correct replacement for my model?

    Yes, Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the ISD995.

  • What warranty is on this part?

    Replacement parts all have a once year warranty when purchased on our website.

  • Does this part replace carriage part# 25598R on my Genie SD9000?

    Yes, Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the SD9000.

     

  • Will This carriage work on model SD9000

    Yes, Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the SD9000.

     

  • Does this work with IS550/A ?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the IS550/A garage door opener.

  • Will this fit on G5000?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the G5000 garage door opener.

  • Does this carriage work with model #H8000D

    Yes, the 36179R.S carriage will work with the H8000D model.

  • I have Genie 2562 opener and I ordered this part by mistake. Would this part work of 2562? Thanks

    No this carrige will not work on yor 2562 garage door opener. You would need the 37845R.S carriage assembly for your garage door opener.

  • does this work with the H4000A model

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S will work with your Genie model H4000A garage door opener.

  • Does it fit model ISL950/A

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S will work with your Genie model ISL950/A.

  • Does this part work with the Model H4000A also?

    Yes, this will work with the H4000A. 

  • Does this fit model CM7600-IC

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model CM7600-IC.

  • Will your drive 36179R.S work with H6000-07?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model H6000-07.

  • Does this screw driver carriage assembly fit on the opener model ISL950/A?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S will work with your Genie model ISL950/A garage door opener.

  • hello is this part compatible with model ISL950/A ?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model ISL950/A.

  • Will this fit a 2060L-07 model?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model 2060L-07.

  • Model ISD990 Need screw drive carriage, what is the part number for this replacement screw drive carriage?

    The Screw Drive Carriage Assembly with Magnet- 36179R.S is the correct carriage for your Genie model ISD990 garage door opener.

  • my opener is model IS550/A I see that IS550 and IS550/B are listed will this screw drive carriage work with my model.

    Yes, the  Screw Drive Carriage Assembly with Magnet- 36179R.S will work with your Genie model IS550/A garage door opener.

  • genie interlicode model number is 550/A screw drive carriage. will the 36179r.s work as a replacement carriage assembly? Thanks. Steven Yap

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model IS550/A.

  • Will this part work on model IS990-2

    Yes, the 36179R.S carriage will work with your Genie model IS990-2 garage door opener.

  • Where do I find the make and model number ? I do know it is a genie and I do know it’s a screw drive.

    Most commonly the model number can be found on the back of the opener, above the light bulb cover, or about a foot down the rail.

  • Will this 36279r.s work with the H6000-07? (I see just the H6000 listed in the compatibility models above.

    Hello. Yes the 36179R.S carriage assembly will work with your Genie model H6000-07 opener.

  • I have an ISD 990 I need a new trolley. Is the part number I want for this the same as listed as 36179R.S?

    Yes, you would need the 36179R.S Carriage for your Genie ISD990 opener https://store.geniecompany.com/products/screw-drive-carriage-assembly-with-magnet

  • Does the 36179R.S carriage assembly fit model G5050

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the Genie model G5050.

  • Does this fit 1/2 HP model G5050

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model G5050.

  • Will this carriage part (Screw Drive Carriage Assembly with Magnet- 36179R.S) work on Genie GX and GXL Series? Please let me know. Thanks. Luis

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with the Genie GX and GXL series models.

  • Will this fit a Model G5000?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model G5000.

  • I HAVE GENIE SCREW DRIVE GARAGE DOOR OPENING SYSTEM. MY OWNERS MANUAL SERIES G, GX AND GXL. HAND WRITTEN BY SOMEONE SAYS IT IS MODEL#G 2500. I NEED TO REPLACE CARRIAGE AND THE MANUAL SHOWS PART#25589S. IS THIS PART MENTIONED IN THE MANUAL THE RIGHT ONE? THANKS

    The Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with your Genie model G2500.  It is also compatible with all models covered by the G, GX, and GXL series manual.

  • will the carriage assembly 36179R.s work on the genie model isl950/A

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model ISL950/A.

  • How soon Ould I get an H4000-A trolly assembly delivered to Salt Lake City ut?

    4-5 Business days.

  • what carriage model for Genie 306OL garage door opener

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie Model 3060L.

  • Does this Screw Carriage Assembly compatible with the model ISD 1000 model?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model ISD1000.

  • Will this part fit older model H4000-07?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie Model H4000-07.

  • Is this compatable with the Trilog 1500?

    No, the 36179R.S is not compatible with Genie model TriloG 1500, for the TriloG 1500 you would need either the carriage 37845R.S or shuttle 36664R.S, see links for the one that best resembles your need.

  • Does this carriage fit model pro951c/a?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model PRO95IC/A.

  • Will this fit a model 3060l-07/m

    Yes, the Genie model 3060L-07/M uses the 36179R.S carriage.

  • Is this compatible with Genie model ISD 1000?

    Yes, the Screw Drive Carriage Assembly with Magnet- 36179R.S is compatible with Genie model ISD1000.

To replace the 36179R.S Genie Screw Drive Carriage follow these steps:

1- With the garage door in the closed position, disengage the screw drive carriage by pulling the red emergency release cord.  After pulling the release cord, slide the old worn-out carriage to about 6 inches from the door end of the rail. 

Genie screw drive carriage replacement 36179R.S

 

2-  Pull the clevis and cotter pin, from the garage door arm that is attached to the old screw drive carriage.  Hold the garage door arm and do not let it fall against the garage door. Once the clevis pin and cotter pin are both removed, slowly slide the door arm down toward the garage door. 

Replacing the 36179R.S screw drive carriage, removing the clevis and cotter pin

 

3-  Slide the screw drive carriage down closer to the garage door (until it is about 2 inches from the end of the rail).  Then remove the nut and bolt from the header bracket that is above the garage door.  Hold onto the rail while doing so. (You may want to use a ladder to rest the garage door opener rail on), or have a second person helping you.

 

4- Slightly lift up on the screw drive rail, slide the old carriage out of the rail.  Then slide the new 36179R.S screw drive carriage back on the rail. Reattach the rail to the header bracket above the garage door with the nut and bolt.

 

5- Reattach the garage door arm to the screw drive carriage and reconnect the door arm with the clevis and cotter pin that was removed.  After reattaching, re-engage the new screw drive carriage assembly by pulling the red emergency release cord towards the powerhead of the garage door opener. 

36179R.S Genie Screw Drive Garage Door Opener Carriage Replacement

  • Shipping Truck

    Free Shipping

    We offer FREE shipping and handling on all orders that total over $17.99 and are shipped to a US address. All orders are shipped using UPS ground, directly from The Genie Company.

  • Genuine Genie Accessories and Parts

    Genuine Replacements

    Buying GENUINE Genie accessories and parts guarantees that you are getting quality OEM materials backed by a Genie warranty.

  • Customer support chat

    Support

    Need assistance? We are here for you! We offer a wide range of customer support options including contact by phone or email, web chat services with a live agent, and a robust support section also located on our website.  All customer care teams and services are based in the USA.

FREE SHIPPING ON ALL US ORDERS 17.99 AND UP