Skip to product information
1 of 2

The Genie Company

Intellicode® Receiver Board 36521R.S

Intellicode® Receiver Board 36521R.S

Regular price $76.99 USD
Regular price Sale price $76.99 USD
Sale Sold out

Intellicode receiver replacement circuit board that works certain Genie model garage door openers. This receiver board controls the wireless devices that work with the opener. Use this replacement board to get your wireless devices working again once you have determined the receiver circuit board will need replacing.

  • Compatible with Models:  1060, 1560, 2560, 3560, 3860, IC250, IS525, IS525/B, IS550, IS550/B, IS850, IS900, IS900/B, IS920/A, CM7600, CM8600, PRO95, CM8600-FN, 2060L, 3060L,  H4000, H6000, IMS1000, ISL950, ISL950/B, ISL980, ISL980/B
  • Genuine Genie replacement part 
  • Requires re-programming with the new board 

SKU: 36521R.S

In Stock! Usually ships within 24 hours.

ASK A QUESTION View full details
Intellicode® Receiver Board  36521R.S ,  Service Parts - The Genie Company
Intellicode® Receiver Board 36521R.S
$76.99

QUESTIONS & ANSWERS

Ask a Question
  • I have a CM8600IC/A model and was wondering if the 36521R.S Intellicode receiver board would work with it?

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with Genie model CM8600IC/A.

  • Will a 36521R.S replace a 36520A Receiver Board?

    Yes, the Intellicode® Receiver Board 36521R.S is a compatible replacement for the 36520A.  The 36520A is the raw board part number.

  • I have a model CM7600IC/A. The Receiver Board on my unit does not look like the one in this picture. Is this the correct board? The programming button on mine is broken and will not work.

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with your Genie model CM7600IC/A.  It will typically be smaller and look a little different than the original board, but rest assured it is completely compatible.

  • I have a model IS550/A opener and the number on the intellicode receiver board is 33286B-R0. Will this board work as a replacement? Thanks.

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with Genie model IS550/A.

  • WI’ll this work with a IS55OA operator.Logic board will not code with remotes.I have erased board and light keeps blinking.I have many years experience in door business

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with Genie model IS550/A.  If you have cleared the memory by holding the learn code button until the light goes out, and then reprogramming, by pressing and releasing the learn code button, backing away 5-6 feet and slowly pressing the remote button 4-5 times until the unit runs, then the 36251R.S receiver board failure would be a likely cause.

  • is this part for an IS900A?

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with Genie model IS900A.

  • I have a older model H4000 and our door won't open. The motor ingages but it won't pull up. We do have a flashing red light.

    If the motor is attempting to run but the door is stopping right away, we would recommend checking your door balance. With the door closed, pull the red release cord to disengage the door from the opener. Then lift the door manually (by hand) to 3-4 feet off the ground. Let go of the door, if the door stays in place or moves slightly it is balanced. If the door moves more than 1 foot up or down the door may need balance by a professional door dealer. If the door is balanced you can try increasing your opening/up force knob, but turning it to the right/clockwise by 1/4 quarter turn at a time and retrying operation of the door electrically. The force knob is located under the light bulb cover.

  • I have an Genie model 850. I need to install an electric eye. But the red light will not go off even though the alignment has been checked numerous times. The electric eye is model GSTB-R

    The red light should always be on constantly.  In other words, you should have a solid red light and a solid green light.  If neither are blinking this is normal operation and there is no other action needed.

    Please let us know if this is not the case.

  • Will this work with a Genie model 2560/M

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with model 2560/M.

  • will circuit board# 36521R.s work on my pro951 C/A thanks

    Yes, it will.

  • will circuit board #36521R.s work on my moel isl 950/a

    Yes this receiver board part number 36521R.s will work on teh ISL950/A Genie garage door opener

  • Will it increase the range? Pro95IC/A.

    The range can be affected by a few different things. To troubleshoot the issue, please contact Genie customer service at 1-800-354-3643.

  • Your description says the following "Use this replacement board to get your wireless devices working again once you have determined the receiver circuit board will need replacing." How do I know this part is the problem? I have tried to pair to my remote with new battery, a myQ Smart Garage Door Opener, my toyota Rav 4 remote... Nothing works when we try to pair it. Our only thought it is this board. This is a HD4000 screw type opener. Is the board to old to work with these newer devices? Thank you

    Please contact Genie customer service at 1-800-354-3643 for assistance.

  • Will this work with a 3060 L 07

    Yes, it will,

  • I have a Genie model # IS900/A and the remotes have stop working , will the problem be the circuit board and which one is it I didn't see one for the 900/A. Only the IS900 or IS900/B

    Yes, this will work with the IS900/A model garage door opener.

  • When I push the learn button on my H6000A, The LED does not illuminate. Will replacing the Intellicode® Receiver Board resolve the issue?

    Yes, it will.

  • WIll Intellicode® Receiver Board 36521R.S work with the H6000A opener.

    Yes, it will.

  • Receiver sensitivity (i.e. remote ability(distance from receiver) to activate door varies with antenna position; How is antenna mounter on receiver board (solder?) Can that be repaired or do i need a new receiver board? Genie Opener Model PRO951C/A -what is the number of the replacement receiver board? Thank You.

    Please contact Genie customer service at 1-800-354-3643 for assistance.

  • I have a genie model cm86001c/a, receiver model ACSR3G. I need new remote controls but not sure what to get

    If you need a one button remote, you can use the G1T-BX remote. If you have more than one garage door with a Genie Intellicode model garage door opener, you can use the G3T-R remote.

  • Will this circuit board work with model H6000A?

    Yes, it will!

  • I am looking for the circuit board for our Model CM7600IC/A.

    You can view the parts for the CM7600IC/A here.

  • Will this work on my model IS550/A? The receiver board number on my unit is 33286A-R1.

    Yes, it will!

  • will this bd work on an is920/A original bd is 33286-R0

    Yes, it will!

  • Will this work for model 3062?

    No, the 36521R.S circuit board will not work on the 3062 model garage door opener. The correct circuit board for the 3062 is the 38874R1.S or 38875R1.S.

  • Will this board work on model 3042

    No, it will not. The correct board for the 3042 model garage door opener would be the 38875R3.S or 38874R3.S.

  • will receiver board #36521r.s work on my cm76001c/a garage door opener? Learning button not working.

    Yes, it will work with the CM7600IC model.

  • will this work with ISD990?

    No, this is not the correct circuit board for the ISD990. You would need the 36600R.S circuit board.

  • My is850 is missing learning button. Is this part needed to repair and how does it install?

    This receiver board will have the learn code button on it. So if your learn code button is missing or not working, this would resolve that issue. The installation instructions will come with the new board 36521R.S. You can also view the instructions in the tab below on this page for installation instructions. https://store.geniecompany.com/products/intellicode-receiver-board-for-ac-screw-drive-garage-door-opener

  • It appears that my Genie Pro 98 does not have a learning mode... will this board work in that unit and give it learning capability so I can install an exterior keypad and synch?

    No, you would need to add an external receiver model GIRUD- 1T for that capability.

  • My defective receiver circuit board # is 33286B-R0 for a Genie ISL 950/A. Is the 36521R.S replacement part the correct receiver board for the ISL 950/A?

    Yes, it is!

  • Will this part work with my ISL 950/A

    Yes, it will.

  • I’m looking for the circuit board on the genie H6000A which has the learning button

    This is the one, the 36521R.S.   

  • will this board work on H4000A

    Yes, it will.

  • Will this work on model #CM8600IC/A

    Yes, it will.

  • How many devices( keyless entry's or transmitters ) can you program to this reciever

    You can program up to seven wireless devices. 

  • Would this circuit board work for model IS550/A? The circuit board number on my opener is 31180A - R1. I just want to be sure that the replacement part 36521R.S will work with my opener model.

    Yes, this will work. 

  • Is this compatible with IS550/A and what specifically needs to be reprogrammed.

    Yes it is. You will need to reprogram all of your devices.

  • I have an IS900B. None of the garage door remotes work or car remote. They all stopped working at the same time. The manual garage door opener works fine. When trying to reprogram the remotes, the receiver does blink when pressed, but when you press the remote to program, it just goes off. It should stay on till the 2nd press of the remote to confirm. It just won't program. Is the fix a new intellicode board?

    Have you unplugged the opener for ten minutes and plugged it back in, then tried programming the wireless devices?
    If that does not correct the issue I would recommend replacing the receiver board. Intellicode® Receiver Board 36521R.S

  • I have three openers, H4000-07, IS550/A, and H6000A. Doesboard # 36521R.S work for all three? Thanks.

    Yes, the Intellicode® Receiver Board 36521R.S will work with all three of those Genie model garage door opener.

  • My model number is ISL950A it says it's for ISL950 and ISL950/B it doesn't say for my exact model

    Yes, the Intellicode® Receiver Board 36521R.S is the correct receiver board for your model ISL950A garage door opener.

  • Please confirm that the 36521R.S is the replacement board for a GPS1200IC

    The Intellicode® Receiver Board 36521R.S is not the correct receiver for your Genie model GPS1200IC garage door opener. YOu would need the 36521S.S receiver for your garage door opener.

  • Will this reciever board 36521.S work with a pmx500IC/B

    No, this receiver will not work with your garage door opener. You would need the 3 terminal control board for a Genie PMX500IC/B garage door opener. 

     

  • Will this work with model is900/a? Thanks!

    Yes, the 36521R.S receiver board will work with your IS900/A Genie garage door opener.

  • I see this will work with model H4000 - what about H4000A ?

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with Genie model H4000A.

  • Compatible with IMS1000/A?

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with Genie model IMS1000/A.

  • is this compatible with cm86001 c/a, it shows cm8600 will we have to reprogram our remote door openers

    Yes, the Intellicode® Receiver Board 36521R.S is compatible with your Genie model CM8600IC/A.

  • What number is the receiver board on a h6000a genie screwdriver opener

    Yes, Intellicode® Receiver Board 36521R.S is the correct reciever for your model H6000A.

PDF Instructions for replacing the 36521R.S circuit board 

REPLACEMENT RECEIVER BOARD (36521R.S) INSTALLATION INSTRUCTIONS

For 390 MHz AC Screwdrive Models 

WARNING

Moving door can cause serious injury or death.
• During this procedure, the Door Opener could begin to run. Stay away from moving Door and its parts. To keep Door from moving, close Door and disconnect it from Opener by pulling Emergency Release Cord.
• Keep people clear of opening while the door is moving.
• Do Not allow children to play with remote control or door opener.
• Do Not operate a door that is jammed or has a broken spring.

If safety reverse does not work properly:

• Close door/disconnect opener by pulling Emergency Release Cord.
• Do Not use the remote control or door opener.
• Refer to Door and Door Opener Owner’s Manuals or Instructions.

WARNING

BE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE INPUT POWER LINES PRIOR TO REMOVING THE ELECTRIC BOX COVER. AN APPROPRIATE LOCKOUT/TAGOUT PROCEDURE IS RECOMMENDED. INSURE THE DOOR IS CLOSED PRIOR TO REMOVING THE OPERATOR. TEST THE DOOR FOR PROPER OPERATION AND CORRECT ANY MALFUNCTIONS PRIOR TO REINSTALLING THE OPERATOR.

 Tools Required: 1/4” nut driver or socket, and/or Phillips screwdriver.

1. UNPLUG operator from110V outlet. If the unit is permanently wired, open the circuit breaker. If you are unsure about how to shut off power to the unit, call a licensed electrician in your area. Do not reconnect power until instructed to do so.

2. REMOVE the 2 upper light cover screws and let light cover flip down. FIG 1

3. LOOSEN but do not remove the 4 motor cover screws and remove the motor cover. FIG 1

Replacing Genie 36521R.S receiver board figure 1

4. REMOVE and retain the receiver mounting screw. FIG 2


5. UNPLUG wire harness from receiver board. Note harness orientation (Green wire on left facing the connector). FIG 3

6. INSTALL the 36521R.S receiver board to bracket and install the mounting screw. FIG 2

7. RECONNECT wire harness to replacement receiver board. FIG 3

Replacing Genie 36521R.S receiver board figure 2

Replacing Genie 36521R.S receiver board figure 3

8. FEED antenna wire through the hole in the front panel and point down through light cover. FIG 4

Replacing Genie 36521R.S receiver board figure 4

9. REPLACE motor cover.

10. PLUG power cord to outlet (or reset breaker).

11. ADJUST up and downforce controls and program transmitter devices following all safety and operating instructions in the owner’s manual.

12. FLIP lens cover up and attach 2 light lens screws.

  • Shipping Truck

    Free Shipping

    We offer FREE shipping and handling on all orders that total over $17.99 and are shipped to a US address. All orders are shipped using UPS ground, directly from The Genie Company.

  • Genuine Genie Accessories and Parts

    Genuine Replacements

    Buying GENUINE Genie accessories and parts guarantees that you are getting quality OEM materials backed by a Genie warranty.

  • Customer support chat

    Support

    Need assistance? We are here for you! We offer a wide range of customer support options including contact by phone or email, web chat services with a live agent, and a robust support section also located on our website.  All customer care teams and services are based in the USA.

FREE SHIPPING ON ALL US ORDERS 17.99 AND UP