{"id":10492070595,"title":"Screw Drive Carriage Assembly with Magnet- 36179R.S","handle":"screw-drive-carriage-assembly-with-magnet","description":"The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage.\n\u003cul\u003e\n\u003cli\u003eWorks with magnetic or mechanical style limit switches \u003c\/li\u003e\n\u003cli\u003eLever for emergency release cord to attach to keeps you safe in case of a power outage or other emergency to release the door quickly \u003c\/li\u003e\n\u003cli\u003eThe carriage is designed to protect the screw drive from wear and tear\u003c\/li\u003e\n\u003cli\u003eGenuine Genie replacement part \u003c\/li\u003e\n\u003cli\u003eThe carriage is often referred to as a Genie trolley\u003c\/li\u003e\n\u003cli\u003eEasy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly \u003ca href=\"https:\/\/store.geniecompany.com\/blogs\/genie-blog\/how-to-replace-the-genie-legacy-screw-drive-carriage-assembly\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(check out the blog article with instructions and video here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for previous\/ discontinued carriage parts numbers- 34107R, 34107R.S, 20414R, 25589R, 25589S\u003c\/li\u003e\n\u003cli\u003eThis same screw drive carriage was used in many older model Genie garage door openers over the years. See the list below. \u003c\/li\u003e\n\u003cli\u003eCompatible with Models:  1060, 1560, 2560, 3560, 3860, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, CM7500, CM7600, CM8600, PRO95, CM8600-FN, H4000, H6000, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, 2060L, 3060L, IMS1000, ISL950, ISL950\/B, ISL980, ISL980\/B,  G4050CL, G5000CL, G5050CL, G5500CL, G5700CL, G8000CL, GX9000CL, GXL9500CL, GXL9550CL, GXL9900CL, GXL1000CL,Excelerator, H8000-07, H8000D, ISD990, ISD995, ISD1000, PRO99-2IC, PRO99FN, CMD9900, 4560, 4060L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003eTo replace the 36179R.S Genie Screw Drive Carriage follow these steps:\u003c\/p\u003e\n\u003cp\u003e1- With the garage door in the closed position, disengage the screw drive carriage by pulling the red emergency release cord.  After pulling the release cord, slide the old worn out carriage to about 6 inches from the door end of the rail. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_for_Genie_Screw_Drive_Garage_Door_Opener_large.png?v=1565375527\" alt=\"Genie screw drive carriage replacement 36179R.S\"\u003e\u003c\/p\u003e\n\u003cp\u003e2-  \u003cspan\u003ePull the clevis and cotter pin, from the garage door arm that is attached to the old screw drive carriage.  Hold the garage door arm and do not let it fall against the garage door. Once the clevis pin and cotter pin are both removed, slowly slide the door arm down toward the garage door. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_removing_the_door_arm_for_replacement_large.png?v=1565375567\" alt=\"Replacing the 36179R.S screw drive carriage, removing the clevis and cotter pin \"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3-  Slide the screw drive carriage down closer to the garage door (until it is about 2 inches from the end of the rail).  Then remove the nut and bolt from the header bracket that is above the garage door.  Hold onto the rail while doing so. (You may want to use a ladder to rest the garage door opener rail on), or have a second person helping you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4- Slightly lift up on the screw drive rail, slide the old carriage out of the rail.  Then slide the new 36179R.S screw drive carriage back on the rail. Reattach the rail to the header bracket above the garage door with the nut and bolt.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5- Reattach the garage door arm to the screw drive carriage and reconnect the door arm with the clevis and cotter pin that was removed.  After reattaching, re-engage the new screw drive carriage assembly by pulling the red emergency release cord towards the powerhead of the garage door opener. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179RS_large.png?v=1565375792\" alt=\"36179R.S Genie Screw Drive Garage Door Opener Carriage Replacement\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2017-06-26T15:24:44-04:00","created_at":"2017-06-07T14:52:01-04:00","vendor":"The Genie Company","type":"Service Parts","tags":["Carriage"],"price":1999,"price_min":1999,"price_max":1999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40522208963,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"36179R.S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Screw Drive Carriage Assembly with Magnet- 36179R.S","public_title":null,"options":["Default Title"],"price":1999,"weight":136,"compare_at_price":null,"inventory_quantity":990,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage-_t_001.jpg?v=1540410071","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage-_f.jpg?v=1540410071","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage_s_HR.jpg?v=1540410071"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage-_t_001.jpg?v=1540410071","options":["Title"],"content":"The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage.\n\u003cul\u003e\n\u003cli\u003eWorks with magnetic or mechanical style limit switches \u003c\/li\u003e\n\u003cli\u003eLever for emergency release cord to attach to keeps you safe in case of a power outage or other emergency to release the door quickly \u003c\/li\u003e\n\u003cli\u003eThe carriage is designed to protect the screw drive from wear and tear\u003c\/li\u003e\n\u003cli\u003eGenuine Genie replacement part \u003c\/li\u003e\n\u003cli\u003eThe carriage is often referred to as a Genie trolley\u003c\/li\u003e\n\u003cli\u003eEasy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly \u003ca href=\"https:\/\/store.geniecompany.com\/blogs\/genie-blog\/how-to-replace-the-genie-legacy-screw-drive-carriage-assembly\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(check out the blog article with instructions and video here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for previous\/ discontinued carriage parts numbers- 34107R, 34107R.S, 20414R, 25589R, 25589S\u003c\/li\u003e\n\u003cli\u003eThis same screw drive carriage was used in many older model Genie garage door openers over the years. See the list below. \u003c\/li\u003e\n\u003cli\u003eCompatible with Models:  1060, 1560, 2560, 3560, 3860, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, CM7500, CM7600, CM8600, PRO95, CM8600-FN, H4000, H6000, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, 2060L, 3060L, IMS1000, ISL950, ISL950\/B, ISL980, ISL980\/B,  G4050CL, G5000CL, G5050CL, G5500CL, G5700CL, G8000CL, GX9000CL, GXL9500CL, GXL9550CL, GXL9900CL, GXL1000CL,Excelerator, H8000-07, H8000D, ISD990, ISD995, ISD1000, PRO99-2IC, PRO99FN, CMD9900, 4560, 4060L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003eTo replace the 36179R.S Genie Screw Drive Carriage follow these steps:\u003c\/p\u003e\n\u003cp\u003e1- With the garage door in the closed position, disengage the screw drive carriage by pulling the red emergency release cord.  After pulling the release cord, slide the old worn out carriage to about 6 inches from the door end of the rail. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_for_Genie_Screw_Drive_Garage_Door_Opener_large.png?v=1565375527\" alt=\"Genie screw drive carriage replacement 36179R.S\"\u003e\u003c\/p\u003e\n\u003cp\u003e2-  \u003cspan\u003ePull the clevis and cotter pin, from the garage door arm that is attached to the old screw drive carriage.  Hold the garage door arm and do not let it fall against the garage door. Once the clevis pin and cotter pin are both removed, slowly slide the door arm down toward the garage door. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_removing_the_door_arm_for_replacement_large.png?v=1565375567\" alt=\"Replacing the 36179R.S screw drive carriage, removing the clevis and cotter pin \"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3-  Slide the screw drive carriage down closer to the garage door (until it is about 2 inches from the end of the rail).  Then remove the nut and bolt from the header bracket that is above the garage door.  Hold onto the rail while doing so. (You may want to use a ladder to rest the garage door opener rail on), or have a second person helping you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4- Slightly lift up on the screw drive rail, slide the old carriage out of the rail.  Then slide the new 36179R.S screw drive carriage back on the rail. Reattach the rail to the header bracket above the garage door with the nut and bolt.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5- Reattach the garage door arm to the screw drive carriage and reconnect the door arm with the clevis and cotter pin that was removed.  After reattaching, re-engage the new screw drive carriage assembly by pulling the red emergency release cord towards the powerhead of the garage door opener. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179RS_large.png?v=1565375792\" alt=\"36179R.S Genie Screw Drive Garage Door Opener Carriage Replacement\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}
Screw Drive Carriage Assembly with Magnet ,  Service Parts - The Genie Company

Screw Drive Carriage Assembly with Magnet- 36179R.S

$19.99

The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is no...


More Info