{"id":10555723075,"title":"Belt\/Chain Drive Carriage Assembly for 7' High Garage Door - 36773R.S","handle":"carriage-assembly-2","description":"\u003cp\u003eThis carriage assembly is made to replace the carriage on compatible Genie belt and chain drive operators that have a rail for a 7-foot high garage door. The carriage attaches to the bullet on the belt and when engaged together will operate to open and close the garage door. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Models: 1028, 2028, 3020H, 3020H-B, 3120, 3022, 3024, 3042, 4022, 4024, 4042, \u003cspan\u003eSilentMax 1000, SilentMax 1200, IntelliG 1000, IntelliG 1200, ReliaG 650, ReliaG 850\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eStraight door arm is attached and included (for the 7-foot high garage door)\u003c\/li\u003e\n\u003cli\u003eGenuine Genie replacement part \u003c\/li\u003e\n\u003cli\u003eInstallation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R.S_S.S_Carriage_Replacement_Instructions.pdf?4181\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Instructions for replacing the 36773R.S Carriage\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e36773R.S Carriage Replacement Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis small repair will require removal of the garage door opener from its mounting hardware and repairs will be made on a bench or floor. Use the Owners Manual and\/or Installation Poster for detailed disassembly\/reassembly instructions and carefully read and understand all warnings and cautions pertaining to the opener.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eBE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE INPUT POWER LINES PRIOR TO REMOVING THE MOTOR COVER.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Close the garage door with the opener if able.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Pull the red emergency release cord on the carriage to disengage opener to close the garage door if necessary. (If you are unable to lower the door using the garage door opener, use extreme caution manually closing the door. Before pulling the emergency release cord, make certain people and objects are clear of the door opening.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Unplug the garage door opener power cord from power receptacle or turn off the breaker to the garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Open the lens cover and remove light bulbs (if installed). (Figure 1) \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_1_medium.png?v=1559059875\" alt=\"36773R.S Carriage replacement instructions figure 1 \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove wall console and Safe-T-Beam® wires from the terminal block. (Figure 2). Use a common small screwdriver to press in on the orange tabs while gently pulling wires from the block. Mark wires to help facilitate replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_replacement_instructions_figure_2_medium.png?v=1559059932\" alt=\"36773R.S Carriage replacement instructions figure 2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Remove the network adapter and battery backup harnesses from the front of opener powerhead (if applicable).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e Remove the two nuts and bolts from the door arms (straight and curved) to separate door from the opener. (Figure 3). \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_replacement_instructions_figure_3_medium.png?v=1559060030\" alt=\"Replacement carriage 36773R.S instructions figure 3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e Remove the motor head and belt or chain rail assembly (Figures 4 and 5) from the mounting brackets and set the motor head on a clean workbench or garage floor.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"Figure 4 replacing Genie carriage part number 36773R.S figure 4\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_replacement_instructions_figure_4_medium.png?v=1559060111\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"Figure 5 replacing Genie carriage 36773R.S instructions\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_5_medium.png?v=1559060152\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e9.\u003c\/strong\u003e Remove the four self-tapping bolts from the rail\/motor mounting straps and pull the rail from motor head. (Figure 6). Set the motor head aside. Set the chain\/ belt rail assembly on the floor upside down to help with disassembly.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_6_medium.png?v=1559060220\" alt=\"36773R.S Carriage replacement instructions figure 6\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10.\u003c\/strong\u003e Loosen tensioner nut from the garage door end of the rail to create slack in belt\/chain. (Figure 7).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_7_medium.png?v=1559060267\" alt=\"Replacing Genie carriage 36773R.S instructions figure 7\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11.\u003c\/strong\u003e Remove the two screws from drive gear assembly. (Figure 8).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_8_medium.png?v=1559060315\" alt=\"Figure 8 for instructions on replacing Genie carriage part number 36773R.S\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12.\u003c\/strong\u003e Remove two screws holding the pulley guard in place. (Figure 9). (When applicable)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"36773R.S Carriage replacement instructions figures 9 and 10 \" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_9_and_10_large.png?v=1559060372\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e13.\u003c\/strong\u003e Dislodge drive gear assembly from locking tabs (Figure 8) And slide towards door end of the rail to feed tensioner assembly, pulley guard (Pulley guard is not used on all models), and belt\/chain out through the end of the rail approximately 8” to10”. (Figure 9).\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e14.\u003c\/strong\u003e Slide defective carriage out through the door end of the rail and dispose of.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e15.\u003c\/strong\u003e Install new 36773R.S Genie carriage. Be certain that door arm is facing to the door end of rail.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e16.\u003c\/strong\u003e Slide drive gear assembly, pulley guard, and tensioner assembly back into original position. Make certain that the locking tabs on drive gear assembly protrude through slots in rail and secure with the two screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e17.\u003c\/strong\u003e Secure pulley guard with two screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e18.\u003c\/strong\u003e Tighten tensioner nut until the slack is removed from belt or chain.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e19.\u003c\/strong\u003e Install the rail to motor head assembly using the two mounting straps and four self-tapping screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e20.\u003c\/strong\u003e Reinstall the garage door opener assembly in reverse order as removed in steps 3-7. Reference the openers owners manual and installation poster if needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e21. Tie a knot in emergency release cord (Figure 10) to secure to carriage release cam. Install the red release handle approximately 6 feet from floor and tie knot to secure.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e22. Plug the garage door opener back in (turn the breaker back on if it was shut off).\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e23. Clear and reprogram limit controls per owners manual, the same as with new installation settings.\u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2017-06-27T15:28:44-04:00","created_at":"2017-06-27T15:30:06-04:00","vendor":"The Genie Company","type":"Service Parts","tags":["Carriage"],"price":2578,"price_min":2578,"price_max":2578,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41507483203,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"36773R.S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Belt\/Chain Drive Carriage Assembly for 7' High Garage Door - 36773R.S","public_title":null,"options":["Default Title"],"price":2578,"weight":590,"compare_at_price":null,"inventory_quantity":999,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36773R.S-Carriage-F.jpg?v=1540409982","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36773R.S-Carriage-S.jpg?v=1540409982","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36773R.S-Carriage-T.jpg?v=1540409982"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36773R.S-Carriage-F.jpg?v=1540409982","options":["Title"],"content":"\u003cp\u003eThis carriage assembly is made to replace the carriage on compatible Genie belt and chain drive operators that have a rail for a 7-foot high garage door. The carriage attaches to the bullet on the belt and when engaged together will operate to open and close the garage door. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Models: 1028, 2028, 3020H, 3020H-B, 3120, 3022, 3024, 3042, 4022, 4024, 4042, \u003cspan\u003eSilentMax 1000, SilentMax 1200, IntelliG 1000, IntelliG 1200, ReliaG 650, ReliaG 850\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eStraight door arm is attached and included (for the 7-foot high garage door)\u003c\/li\u003e\n\u003cli\u003eGenuine Genie replacement part \u003c\/li\u003e\n\u003cli\u003eInstallation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R.S_S.S_Carriage_Replacement_Instructions.pdf?4181\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Instructions for replacing the 36773R.S Carriage\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e36773R.S Carriage Replacement Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis small repair will require removal of the garage door opener from its mounting hardware and repairs will be made on a bench or floor. Use the Owners Manual and\/or Installation Poster for detailed disassembly\/reassembly instructions and carefully read and understand all warnings and cautions pertaining to the opener.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eBE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE INPUT POWER LINES PRIOR TO REMOVING THE MOTOR COVER.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Close the garage door with the opener if able.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Pull the red emergency release cord on the carriage to disengage opener to close the garage door if necessary. (If you are unable to lower the door using the garage door opener, use extreme caution manually closing the door. Before pulling the emergency release cord, make certain people and objects are clear of the door opening.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Unplug the garage door opener power cord from power receptacle or turn off the breaker to the garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Open the lens cover and remove light bulbs (if installed). (Figure 1) \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_1_medium.png?v=1559059875\" alt=\"36773R.S Carriage replacement instructions figure 1 \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove wall console and Safe-T-Beam® wires from the terminal block. (Figure 2). Use a common small screwdriver to press in on the orange tabs while gently pulling wires from the block. Mark wires to help facilitate replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_replacement_instructions_figure_2_medium.png?v=1559059932\" alt=\"36773R.S Carriage replacement instructions figure 2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Remove the network adapter and battery backup harnesses from the front of opener powerhead (if applicable).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e Remove the two nuts and bolts from the door arms (straight and curved) to separate door from the opener. (Figure 3). \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_replacement_instructions_figure_3_medium.png?v=1559060030\" alt=\"Replacement carriage 36773R.S instructions figure 3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e Remove the motor head and belt or chain rail assembly (Figures 4 and 5) from the mounting brackets and set the motor head on a clean workbench or garage floor.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"Figure 4 replacing Genie carriage part number 36773R.S figure 4\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_replacement_instructions_figure_4_medium.png?v=1559060111\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"Figure 5 replacing Genie carriage 36773R.S instructions\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_5_medium.png?v=1559060152\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e9.\u003c\/strong\u003e Remove the four self-tapping bolts from the rail\/motor mounting straps and pull the rail from motor head. (Figure 6). Set the motor head aside. Set the chain\/ belt rail assembly on the floor upside down to help with disassembly.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_6_medium.png?v=1559060220\" alt=\"36773R.S Carriage replacement instructions figure 6\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10.\u003c\/strong\u003e Loosen tensioner nut from the garage door end of the rail to create slack in belt\/chain. (Figure 7).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_7_medium.png?v=1559060267\" alt=\"Replacing Genie carriage 36773R.S instructions figure 7\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11.\u003c\/strong\u003e Remove the two screws from drive gear assembly. (Figure 8).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_8_medium.png?v=1559060315\" alt=\"Figure 8 for instructions on replacing Genie carriage part number 36773R.S\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12.\u003c\/strong\u003e Remove two screws holding the pulley guard in place. (Figure 9). (When applicable)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"36773R.S Carriage replacement instructions figures 9 and 10 \" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36773R_Carriage_Replacement_Instructions_Figure_9_and_10_large.png?v=1559060372\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e13.\u003c\/strong\u003e Dislodge drive gear assembly from locking tabs (Figure 8) And slide towards door end of the rail to feed tensioner assembly, pulley guard (Pulley guard is not used on all models), and belt\/chain out through the end of the rail approximately 8” to10”. (Figure 9).\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e14.\u003c\/strong\u003e Slide defective carriage out through the door end of the rail and dispose of.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e15.\u003c\/strong\u003e Install new 36773R.S Genie carriage. Be certain that door arm is facing to the door end of rail.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e16.\u003c\/strong\u003e Slide drive gear assembly, pulley guard, and tensioner assembly back into original position. Make certain that the locking tabs on drive gear assembly protrude through slots in rail and secure with the two screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e17.\u003c\/strong\u003e Secure pulley guard with two screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e18.\u003c\/strong\u003e Tighten tensioner nut until the slack is removed from belt or chain.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e19.\u003c\/strong\u003e Install the rail to motor head assembly using the two mounting straps and four self-tapping screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e20.\u003c\/strong\u003e Reinstall the garage door opener assembly in reverse order as removed in steps 3-7. Reference the openers owners manual and installation poster if needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e21. Tie a knot in emergency release cord (Figure 10) to secure to carriage release cam. Install the red release handle approximately 6 feet from floor and tie knot to secure.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e22. Plug the garage door opener back in (turn the breaker back on if it was shut off).\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e23. Clear and reprogram limit controls per owners manual, the same as with new installation settings.\u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}
Belt Drive Carriage Assembly for 7' High Garage Door ,  Service Parts - The Genie Company

Belt/Chain Drive Carriage Assembly for 7' High Garage Door - 36773R.S

$25.78

This carriage assembly is made to replace the carriage on compatible Genie belt and chain drive operators that have a rail for a 7-foot high garage door. The carriage attaches to the bullet on the belt and when engaged together will operate to open and close the garage door.  Compatible with Models: 1028, 2028, 3020H, 3020H-B, 3120, 3022, 3024,...


More Info