3022-TKH ChainMax® 1000 - Chain Drive Model ¾ HPc Garage Door Opener
ChainMax® 1000 Garage Door Opener Installation Video
I am looking for a direct replacement for my existing Model # 3024. (IntelliG 1000). Is the rail for the 3022-TKH the same demension? (approx 1 1/4" X 3")
Yes, the 3022 and the 3024 models have same dimension for the rail and head.
Must the laser sensors be installed? My current 35 year old opener does not have wiring (except for power outlet and wall console.
Yes, the Safe-T-Beams are required to be installed.
Can this replace the 1035 opener, use rhe same chain and rail system?
No, the 3022 model uses a different rail than the 1035 model uses.
Looking for a direct replacement for my gcg350l. Is this opener that will work with existing rail and chain?
No, it will not. We no longer have any models that would work with the same rail as the GCG350L did.
Can I install this to my existing genie rail system?
What is the current model Genie garage door opener that you have installed?
I am replacing a model 3024 power unit (not chain). Will the 3022 power unit easily replace the 3024 without adjusting the chain?
Yes, you can use the 3022 model to replace the 3024 model and keep using the same chain rail.
What are the dimensions of the drive unit?
The overall length of this installed would be 10.6 feet.
Will this work with single one piece garage door?
Yes, it will.
How long is the electric cord on this unit?
Hi Dana -
The cord on this operator is 4 Ft long. An electrical outlet needs to be installed within 3.5' from garage door opener
How many extensions can you add to this Chain Max. I need 10' lift
You can only add up to one extension kit so this model would work on up to an 8-foot high garage door.
Can I buy just the motor head assy and use my existing chain drive 1/2hp genie track etc ? I have a double door and want a stronger motor to raise the door easier and faster.
We do not sell the powerheads by themselves.
I have an old PMX70 model. Which should I buy to just pop out/pop in new one
You will have to remove the old powerhead and rail to replace with the new one for any of the newer garage door openers. The lengths will all be different compared to the older one so your angle iron on the ceiling may/ or may not need to be adjusted. It would be your preference as far as which one to switch to. If you have questions about a specific model, please let us know. The 3022-TKH ChainMax 1000 would be a great option.
I am replacing a Genie Intellicode Chain Glide GCG 350L 1/2 hp that has just expired. Will this unit bolt in to the same bracket that is installed or is there more installation to preform?
The length and width of this garage door opener will be different. Adjustments will need to be made to the brackets when installing.
here is what I was looking at: Genie ChainMax 1000 Garage Door Opener - Durable Chain Drive - Includes two 3-Button Pre-Programmed Remotes, Wall Console, Wireless Keypad, Safe-T-Beams - Model 3022-TKH, 140V DC Motor. Is this a complete system?
Yes, this is the complete system. It has the motor, rail, accessories, and all installation hardware included.
Will this unit work with homelink on a 2004 car?
Yes, it will!
Will this unit work with an 8 ft. door?
It will with the added extension kit, model EKCC.
Do I have to purchase a backup Battery to have this unit running
No, you do not have to use a battery backup. This will plug into the electric outlet.
Is this a Series II or Series III opener?
The 3022-TKH ChainMax 1000 is a series II garage door opener.