Skip to product information
1 of 2

The Genie Company

Belt/ Chain Drive Carriage Assembly - 36453A.S

Belt/ Chain Drive Carriage Assembly - 36453A.S

Regular price $25.99 USD
Regular price Sale price $25.99 USD
Sale Sold out

Product has been discontinued and is NO LONGER AVAILABLE.

This 36453A.S carriage assembly replaces the carriage on the compatible belt and chain drive Genie garage door openers. 

  • Compatible with models 1024, 2024, 1026, 2026 , 1022, 2022, 1042, 2042, 2027 (ChainLift 600, ReliaG 600, BeltLift 600, ChainLift 800, ReliaG 800, ChainLift 700, and QuietLift 800)

SKU: 36453A.S

Sorry, this product is currently out of stock.

ASK A QUESTION View full details
Belt/ Chain Drive Carriage Assembly - 36453A.S
Belt/ Chain Drive Carriage Assembly - 36453A.S
$25.99

QUESTIONS & ANSWERS

Ask a Question
  • Does the chain connect to the carriage?

    The chain attaches to the "connector" that connects the chain together. 

  • Can I use this with model PCG400? Looks like mine is discontinued. #11 on the rail. Carriage and glide assy.

    No, the 36453A.S is not compatible with your PCG400 model. The carriage is no longer available on this model.

  • Will this belt / chain assembly fit a model SP 99 chain driven

    Sorry this belt is not compatible with a Genie model SP99, the belt for that unit is not available due to the age.

  • Is there an alternative I can find that would work for my garage door opener? I have a genie model 2024 professional line opener in my garage. My home was built in 2015. Please let me know.

    No, sorry, unfortunately there is no replacement for the Belt/ Chain Drive Carriage Assembly - 36453A.S.

PDF 36453A.S Carriage replacement instructions 

Replacing the Belt or Chain Drive Carriage (36453A.S) 

This repair will require removal of the unit from it’s mounting hardware and repair made on a clean work surface. Refer to your owners manual to reverse the wiring, mounting, and assembly process. READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS AND WARNINGS CONTAINED IN THESE INSTRUCTIONS AND THE OWNERS MANUAL. If you have any questions or do not understand an instruction, contact a trained service technician. Or call 800-354-3643.

WARNING
BE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE INPUT POWER LINES PRIOR TO REMOVING THE MOTOR COVER.

WARNING
ANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION.

1. Before pulling emergency release cord, make certain people and objects are clear of door opening. Pull emergency release cord on carriage to disengage opener to close door if necessary. (If unable to lower door using opener, use extreme caution manually closing door.

2. Remove power from opener.

3. Remove lens cover(s) by pressing side tabs inward and remove light bulb(s). FIG. 1.

4. Remove wall control and Safe-T-Beam® wires from terminal block located on back of opener FIG. 1. Use small common screwdriver to press in on orange locking clips while gently pulling wires from block. Mark wires to help facilitate replacement.

5. Remove door arm clevis pin and cotter-hairpin to disconnect operator from door. FIG. 2.

6. Remove opener from mounting brackets and hardware and set on a clean work surface.

7. Remove 3 bolts from rail assembly and set powerhead aside. FIG. 1.

Genie 36453A.S Carriage replacement figure 1 and 2

8. Loosen but do not remove tension nut at front (door end) of rail to remove tension on Chain/Belt. FIG.3.

9. Remove Chain/Belt:

• CHAIN OPERATORS: Remove master link from chian bullet and slide chain off one side of rail. FIG. 4.

• BELT OPERATORS: Remove 3 screws from belt retainer and slide one side of belt out of bullet and off one side of rail. FIG. 4.

Genie 36453A.S Carriage replacement figure 3

36453A.S Genie Carriage replacement for chain or belt instructions figure 4

 

10. Remove 2 bolts, nuts, washers retaining pulley assembly to rail. FIG. 5.

11. Slide carriage off of rail.

12. Install replacement carriage in reverse order and proper direction.

13. Install pulley assembly in reverse order. FIG. 5.

14. Install chain/belt in reverse order. FIG. 4.

15. Tension chain/belt. FIG. 6.

16. Reinstall powerhead and rail assembly to ceiling and door. Steps 5,4,3.

17. Apply power to opener.

18. Reset limit settings per owners manual.

19. Test unit fully to ensure travel limits, remote controls and all safety features work correctly. Refer to your owners manual and/or assembly poster.

Genie Belt and Chain Carriage replacement 36453A.S instructions figure 5 and 6

  • Shipping Truck

    Free Shipping

    We offer FREE shipping and handling on all orders that total over $17.99 and are shipped to a US address. All orders are shipped using UPS ground, directly from The Genie Company.

  • Genuine Genie Accessories and Parts

    Genuine Replacements

    Buying GENUINE Genie accessories and parts guarantees that you are getting quality OEM materials backed by a Genie warranty.

  • Customer support chat

    Support

    Need assistance? We are here for you! We offer a wide range of customer support options including contact by phone or email, web chat services with a live agent, and a robust support section also located on our website.  All customer care teams and services are based in the USA.

FREE SHIPPING ON ALL US ORDERS 17.99 AND UP