Free Shipping On All U.S. Orders $14.99 +
{"id":921438388339,"title":"GM3T-R 3-Button Genie Master® Remote (2 Pack)","handle":"gm3t-r-3-button-remote-2-pack","description":"\u003cp\u003eThis bundle pack includes 2-Genie Master 3-button remote controls. These \u003cspan\u003eversatile remotes work with all Genie gated community receivers as well as most Genie openers ever made. Including 390 MHz remotes on 9-switch bianary-or trianary, 12-switch and Intellicode formats. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFeatures all possible programming modes found in Genie products from 1993 to present \u003cstrong\u003e(See compatibility below)\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eSmall compact remote has 3 large buttons for operating up to 3 Genie systems, all the same or all three different \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSimple programming for all modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounts to car visor; Visor clips and batteries (CR2032) are included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEquivalent to 37335R and 37344R \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eUPC: 050049021351\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eProgramming Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.geniecompany.com\/data\/products\/accessories\/geniemaster.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e GM3T-R Programming Instruction Manual \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGenie Master Remote (Transmitter) Operation and Programming Instructions  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThere are a few different programming instructions below based off of which model garage door opener you are programming the Master remotes to. Each button can be programmed to a different type, just follow the instructions for your model. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA. For use with Intellicode® 1 Openers—\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Master Remote comes from the factory in the Intellicode® 1 Operating Mode. The Intellicode®1 Mode is indicated by a RED LED light on the remote whenever a button is pressed (FIG. 2).\u003c\/p\u003e\n\u003cp\u003eProgram the remote as you would any Intellicode® 1 remote using the following steps:\u003c\/p\u003e\n\u003cp\u003e1. Locate the Learn Code Button and Learn Code Indicator LED on your garage door opener’s powerhead (FIG. 1) (See owner’s manual).\u003c\/p\u003e\n\u003cp\u003e2. Press and release the Learn Code Button—the Learn Code LED light will blink rapidly.\u003c\/p\u003e\n\u003cp\u003e3. Press and release the Remote Button you want to program, (FIG. 2)—the Learn Code LED will stay on (stops blinking) \u003c\/p\u003e\n\u003cp\u003e4. Press and release the same Remote Button again—the Learn Code LED light will turn off.\u003c\/p\u003e\n\u003cp\u003e5. Press and release the same Remote Button again—the garage door opener will run.\u003c\/p\u003e\n\u003cp\u003eNOTE: Each garage door opener must have its own assigned Remote Button. To program additional garage door openers, repeat the steps above using a different Remote Button. (or steps below if it is a different type garage door opener)\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Genie Master Remote, GM3T-R programming image\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/gm3t_fig_1_large.png?v=1549037353\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"Genie Master Remote model GM3T-R programming image setting switches\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/gm3t_fig_2_and_3_large.png?v=1549037381\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB. For use with Intellicode® 2 Openers—\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe button or buttons on your Master remote that you wish to use to operate Intellicode® 2 openers, must be switched to the Intellicode® 2 Operating Mode. The Intellicode® 2 Mode is indicated by a GREEN LED on the remote whenever a button is pressed (FIG. 2).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo shift to Intellicode® 2 mode:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Press and hold the chosen Remote Button—A steady RED LED will be illuminated and after 10 seconds— a GREEN LED will also illuminate.\u003c\/p\u003e\n\u003cp\u003e2. Release the button.\u003c\/p\u003e\n\u003cp\u003e3. Press and release that same button again TWICE—the remote’s LEDs will both turn off.\u003c\/p\u003e\n\u003cp\u003e4. Press and release that same button again—the remote’s GREEN LED will light while you press that button indicating it is now in Intellicode® 2 mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo program the remote to an opener:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Press and hold the PROGRAM\/SET (FIG. 1) button on opener’s powerhead for 2 seconds or until the round LED turns BLUE. When you release the button the BLUE LED will go out and the LONG LED will turn PURPLE.\u003c\/p\u003e\n\u003cp\u003e2. Press and release the Remote Button you want to assign to that opener.\u003c\/p\u003e\n\u003cp\u003e3. Press and release that same button. After releasing the button the second time, the LEDs will both be off.\u003c\/p\u003e\n\u003cp\u003e4. Press and release that same button again—the Door Opener will run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC. For use with Openers having a row of Code Switches (9 or 12 switches).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e(If you already have a working “code switch” remote, simply match your new GenieMaster™ Remote switches to those on your existing remote and proceed to step 4.)(FIG.3)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo operate a Code Switch equipped operator:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Open the opener’s light lens in order to gain access to its row of Code Switches. These are 3 position switches (+, – and 0).\u003c\/p\u003e\n\u003cp\u003e2. Slide off the rear cover of the remote (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e3. Set the Code Switches positions in the remote to match those of the switches in the opener. (If you are working with a 9 switch operator, set the remote switches 10, 11 and 12 to the center or “0” position)\u003c\/p\u003e\n\u003cp\u003e4. Locate the non-rolling code button label inside the Rear Cover (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e5. Press the non-rolling code button B, C or D (FIG.3) that matches the appropriate code switch description on the label. The YELLOW LED next to the battery will begin flashing.\u003c\/p\u003e\n\u003cp\u003e6. Press and release the Remote Button you want to assign to that opener—the GREEN LED on the remote will flash for approximately 2 seconds and stop.\u003c\/p\u003e\n\u003cp\u003e7. Pressing the same button again will operate the opener—The RED LED on the remote will flash while the button is pressed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD. Replacing the Battery. (Programming is not affected by battery replacement.)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Slide the Circuit Board Cover off the back of the remote (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e2. Slide the old battery toward the bottom of the remote and out.\u003c\/p\u003e\n\u003cp\u003e3. Properly discard the old battery.\u003c\/p\u003e\n\u003cp\u003e4. Slide a new (2032 size) battery into position and slide the Cover back on\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eE. Resetting the Remote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo return a Remote Button to its original Intellicode® 1 mode:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Slide the Circuit Board Cover off (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e2. Press the DEFAULT button—the yellow LED will flash.\u003c\/p\u003e\n\u003cp\u003e3. Press the Remote Button you wish to reprogram. It's now Intellicode® 1 again.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable style=\"width: 493px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"width: 469px;\"\u003eReplacement Transmitter Recommendation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eModel Number:\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGM3T-R\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003ePart Number:\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e37344R\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eDescription:\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 333px;\"\u003e3-Button, Intellicode® 315\/390 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GM3T-R_compact.jpg?v=1533212180\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"width: 469px;\"\u003eIf you have any of the below transmitters, a replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"width: 270px;\"\u003etransmitter can be GM3T-R.\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICTD-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICTD-3_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGICTD-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGICTD-3\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT-1_or_G2T-1_small.jpg?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT-2_or_G2T-2_small.png?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT-3_or_G2T-3_small.jpg?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIT-1 or G2T-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIT-2 or G2T-2\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e2 GIT-3 or G2T-3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICT390-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICT390-3_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GMIC90-2_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GMIC390-3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGICT390-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGICT390-3\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGMIC90-2\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003eGMIC90-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIFT390-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT390-4_small.jpg?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GMI3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIFT390-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIT390-4\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGMI3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e(flashlight)\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIFTD-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GITD-3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GITD-3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIFTD-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIFTD-3\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGITD-3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e(flashlight)\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e(flashlight)\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIC390-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIC390-2_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIC390-3_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIC90-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIC90-2\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGIC90-3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT-912_small.jpg?v=1533213938\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-1_or_GPT90-1_small.jpg?v=1533213937\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-2_or_GPT90-2_small.jpg?v=1533213937\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGT-912\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGT90-1 or\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGT90-2 or\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGPT90-1\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGPT90-2\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-3_or_GPT90-3_small.jpg?v=1533213938\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-4_or_GPT90-4_small.jpg?v=1533213938\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/MAT90-1_or_MAT-85_small.jpg?v=1533214473\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGT90-3 or\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGT90-4 or\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eMAT90-1 or\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGPT90-3\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGPT90-4\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eMAT-85\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c!-- \/TABS --\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2018-06-13T10:49:57-04:00","created_at":"2018-06-07T09:49:14-04:00","vendor":"The Genie Company","type":"Bundle","tags":["Remotes","Three Button Remote"],"price":5744,"price_min":5744,"price_max":5744,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10104455364723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"39905R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GM3T-R 3-Button Genie Master® Remote (2 Pack)","public_title":null,"options":["Default Title"],"price":5744,"weight":272,"compare_at_price":null,"inventory_quantity":997,"inventory_management":"shopify","inventory_policy":"continue","barcode":"050049021351"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/2_Pack_GM3T.jpg?v=1561040542","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/gm3t_d2409675-1c3e-4ef7-a9f9-5dec3fcb4b1e.jpg?v=1561040542","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/GenieMaster_Remote_lifestyle_1400x_5a5e2404-d96e-4986-90c4-2214e48c4122.jpg?v=1561040571","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/GM3Tremote.jpg?v=1561040542"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/2_Pack_GM3T.jpg?v=1561040542","options":["Title"],"content":"\u003cp\u003eThis bundle pack includes 2-Genie Master 3-button remote controls. These \u003cspan\u003eversatile remotes work with all Genie gated community receivers as well as most Genie openers ever made. Including 390 MHz remotes on 9-switch bianary-or trianary, 12-switch and Intellicode formats. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFeatures all possible programming modes found in Genie products from 1993 to present \u003cstrong\u003e(See compatibility below)\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eSmall compact remote has 3 large buttons for operating up to 3 Genie systems, all the same or all three different \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSimple programming for all modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounts to car visor; Visor clips and batteries (CR2032) are included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEquivalent to 37335R and 37344R \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eUPC: 050049021351\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eProgramming Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.geniecompany.com\/data\/products\/accessories\/geniemaster.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e GM3T-R Programming Instruction Manual \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGenie Master Remote (Transmitter) Operation and Programming Instructions  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThere are a few different programming instructions below based off of which model garage door opener you are programming the Master remotes to. Each button can be programmed to a different type, just follow the instructions for your model. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA. For use with Intellicode® 1 Openers—\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Master Remote comes from the factory in the Intellicode® 1 Operating Mode. The Intellicode®1 Mode is indicated by a RED LED light on the remote whenever a button is pressed (FIG. 2).\u003c\/p\u003e\n\u003cp\u003eProgram the remote as you would any Intellicode® 1 remote using the following steps:\u003c\/p\u003e\n\u003cp\u003e1. Locate the Learn Code Button and Learn Code Indicator LED on your garage door opener’s powerhead (FIG. 1) (See owner’s manual).\u003c\/p\u003e\n\u003cp\u003e2. Press and release the Learn Code Button—the Learn Code LED light will blink rapidly.\u003c\/p\u003e\n\u003cp\u003e3. Press and release the Remote Button you want to program, (FIG. 2)—the Learn Code LED will stay on (stops blinking) \u003c\/p\u003e\n\u003cp\u003e4. Press and release the same Remote Button again—the Learn Code LED light will turn off.\u003c\/p\u003e\n\u003cp\u003e5. Press and release the same Remote Button again—the garage door opener will run.\u003c\/p\u003e\n\u003cp\u003eNOTE: Each garage door opener must have its own assigned Remote Button. To program additional garage door openers, repeat the steps above using a different Remote Button. (or steps below if it is a different type garage door opener)\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Genie Master Remote, GM3T-R programming image\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/gm3t_fig_1_large.png?v=1549037353\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"Genie Master Remote model GM3T-R programming image setting switches\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/gm3t_fig_2_and_3_large.png?v=1549037381\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB. For use with Intellicode® 2 Openers—\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe button or buttons on your Master remote that you wish to use to operate Intellicode® 2 openers, must be switched to the Intellicode® 2 Operating Mode. The Intellicode® 2 Mode is indicated by a GREEN LED on the remote whenever a button is pressed (FIG. 2).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo shift to Intellicode® 2 mode:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Press and hold the chosen Remote Button—A steady RED LED will be illuminated and after 10 seconds— a GREEN LED will also illuminate.\u003c\/p\u003e\n\u003cp\u003e2. Release the button.\u003c\/p\u003e\n\u003cp\u003e3. Press and release that same button again TWICE—the remote’s LEDs will both turn off.\u003c\/p\u003e\n\u003cp\u003e4. Press and release that same button again—the remote’s GREEN LED will light while you press that button indicating it is now in Intellicode® 2 mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo program the remote to an opener:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Press and hold the PROGRAM\/SET (FIG. 1) button on opener’s powerhead for 2 seconds or until the round LED turns BLUE. When you release the button the BLUE LED will go out and the LONG LED will turn PURPLE.\u003c\/p\u003e\n\u003cp\u003e2. Press and release the Remote Button you want to assign to that opener.\u003c\/p\u003e\n\u003cp\u003e3. Press and release that same button. After releasing the button the second time, the LEDs will both be off.\u003c\/p\u003e\n\u003cp\u003e4. Press and release that same button again—the Door Opener will run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC. For use with Openers having a row of Code Switches (9 or 12 switches).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e(If you already have a working “code switch” remote, simply match your new GenieMaster™ Remote switches to those on your existing remote and proceed to step 4.)(FIG.3)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo operate a Code Switch equipped operator:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Open the opener’s light lens in order to gain access to its row of Code Switches. These are 3 position switches (+, – and 0).\u003c\/p\u003e\n\u003cp\u003e2. Slide off the rear cover of the remote (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e3. Set the Code Switches positions in the remote to match those of the switches in the opener. (If you are working with a 9 switch operator, set the remote switches 10, 11 and 12 to the center or “0” position)\u003c\/p\u003e\n\u003cp\u003e4. Locate the non-rolling code button label inside the Rear Cover (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e5. Press the non-rolling code button B, C or D (FIG.3) that matches the appropriate code switch description on the label. The YELLOW LED next to the battery will begin flashing.\u003c\/p\u003e\n\u003cp\u003e6. Press and release the Remote Button you want to assign to that opener—the GREEN LED on the remote will flash for approximately 2 seconds and stop.\u003c\/p\u003e\n\u003cp\u003e7. Pressing the same button again will operate the opener—The RED LED on the remote will flash while the button is pressed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD. Replacing the Battery. (Programming is not affected by battery replacement.)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Slide the Circuit Board Cover off the back of the remote (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e2. Slide the old battery toward the bottom of the remote and out.\u003c\/p\u003e\n\u003cp\u003e3. Properly discard the old battery.\u003c\/p\u003e\n\u003cp\u003e4. Slide a new (2032 size) battery into position and slide the Cover back on\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eE. Resetting the Remote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo return a Remote Button to its original Intellicode® 1 mode:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Slide the Circuit Board Cover off (FIG. 3).\u003c\/p\u003e\n\u003cp\u003e2. Press the DEFAULT button—the yellow LED will flash.\u003c\/p\u003e\n\u003cp\u003e3. Press the Remote Button you wish to reprogram. It's now Intellicode® 1 again.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable style=\"width: 493px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"width: 469px;\"\u003eReplacement Transmitter Recommendation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eModel Number:\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGM3T-R\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003ePart Number:\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e37344R\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eDescription:\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 333px;\"\u003e3-Button, Intellicode® 315\/390 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GM3T-R_compact.jpg?v=1533212180\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"width: 469px;\"\u003eIf you have any of the below transmitters, a replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"width: 270px;\"\u003etransmitter can be GM3T-R.\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICTD-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICTD-3_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGICTD-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGICTD-3\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT-1_or_G2T-1_small.jpg?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT-2_or_G2T-2_small.png?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT-3_or_G2T-3_small.jpg?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIT-1 or G2T-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIT-2 or G2T-2\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e2 GIT-3 or G2T-3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICT390-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GICT390-3_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GMIC90-2_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GMIC390-3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGICT390-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGICT390-3\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGMIC90-2\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003eGMIC90-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIFT390-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIT390-4_small.jpg?v=1533151675\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GMI3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIFT390-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIT390-4\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGMI3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e(flashlight)\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIFTD-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GITD-3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GITD-3_small.jpg?v=1533151700\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIFTD-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIFTD-3\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGITD-3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e(flashlight)\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e(flashlight)\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIC390-1_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIC390-2_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/3101\/8480\/files\/GIC390-3_small.jpg?v=1533151674\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGIC90-1\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGIC90-2\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGIC90-3\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT-912_small.jpg?v=1533213938\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-1_or_GPT90-1_small.jpg?v=1533213937\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-2_or_GPT90-2_small.jpg?v=1533213937\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGT-912\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGT90-1 or\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGT90-2 or\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGPT90-1\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eGPT90-2\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-3_or_GPT90-3_small.jpg?v=1533213938\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GT90-4_or_GPT90-4_small.jpg?v=1533213938\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/MAT90-1_or_MAT-85_small.jpg?v=1533214473\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGT90-3 or\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGT90-4 or\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eMAT90-1 or\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 136px;\"\u003eGPT90-3\u003c\/td\u003e\n\u003ctd style=\"width: 134px;\"\u003eGPT90-4\u003c\/td\u003e\n\u003ctd style=\"width: 119px;\"\u003eMAT-85\u003c\/td\u003e\n\u003ctd style=\"width: 80px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c!-- \/TABS --\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

GM3T-R 3-Button Genie Master® Remote (2 Pack)

Product Description
$57.44
Maximum quantity available reached.

This bundle pack includes 2-Genie Master 3-button remote controls. These versatile remotes work with all Genie gated community receivers as well as most Genie openers ever made. Including 390 MHz remotes on 9-switch bianary-or trianary, 12-switch and Intellicode formats. 

  • Features all possible programming modes found in Genie products from 1993 to present (See compatibility below) 

  • Small compact remote has 3 large buttons for operating up to 3 Genie systems, all the same or all three different 
  • Simple programming for all modes
  • Mounts to car visor; Visor clips and batteries (CR2032) are included
  • Equivalent to 37335R and 37344R 

 UPC: 050049021351

  California Residents: Proposition 65 WARNING

Sku: 39905R

 GM3T-R Programming Instruction Manual 

Genie Master Remote (Transmitter) Operation and Programming Instructions  

There are a few different programming instructions below based off of which model garage door opener you are programming the Master remotes to. Each button can be programmed to a different type, just follow the instructions for your model. 

A. For use with Intellicode® 1 Openers—

The Master Remote comes from the factory in the Intellicode® 1 Operating Mode. The Intellicode®1 Mode is indicated by a RED LED light on the remote whenever a button is pressed (FIG. 2).

Program the remote as you would any Intellicode® 1 remote using the following steps:

1. Locate the Learn Code Button and Learn Code Indicator LED on your garage door opener’s powerhead (FIG. 1) (See owner’s manual).

2. Press and release the Learn Code Button—the Learn Code LED light will blink rapidly.

3. Press and release the Remote Button you want to program, (FIG. 2)—the Learn Code LED will stay on (stops blinking) 

4. Press and release the same Remote Button again—the Learn Code LED light will turn off.

5. Press and release the same Remote Button again—the garage door opener will run.

NOTE: Each garage door opener must have its own assigned Remote Button. To program additional garage door openers, repeat the steps above using a different Remote Button. (or steps below if it is a different type garage door opener)

Genie Master Remote, GM3T-R programming image Genie Master Remote model GM3T-R programming image setting switches

 

B. For use with Intellicode® 2 Openers—

The button or buttons on your Master remote that you wish to use to operate Intellicode® 2 openers, must be switched to the Intellicode® 2 Operating Mode. The Intellicode® 2 Mode is indicated by a GREEN LED on the remote whenever a button is pressed (FIG. 2).

To shift to Intellicode® 2 mode:

1. Press and hold the chosen Remote Button—A steady RED LED will be illuminated and after 10 seconds— a GREEN LED will also illuminate.

2. Release the button.

3. Press and release that same button again TWICE—the remote’s LEDs will both turn off.

4. Press and release that same button again—the remote’s GREEN LED will light while you press that button indicating it is now in Intellicode® 2 mode.

To program the remote to an opener:

1. Press and hold the PROGRAM/SET (FIG. 1) button on opener’s powerhead for 2 seconds or until the round LED turns BLUE. When you release the button the BLUE LED will go out and the LONG LED will turn PURPLE.

2. Press and release the Remote Button you want to assign to that opener.

3. Press and release that same button. After releasing the button the second time, the LEDs will both be off.

4. Press and release that same button again—the Door Opener will run.

 

C. For use with Openers having a row of Code Switches (9 or 12 switches).

(If you already have a working “code switch” remote, simply match your new GenieMaster™ Remote switches to those on your existing remote and proceed to step 4.)(FIG.3)

To operate a Code Switch equipped operator:

1. Open the opener’s light lens in order to gain access to its row of Code Switches. These are 3 position switches (+, – and 0).

2. Slide off the rear cover of the remote (FIG. 3).

3. Set the Code Switches positions in the remote to match those of the switches in the opener. (If you are working with a 9 switch operator, set the remote switches 10, 11 and 12 to the center or “0” position)

4. Locate the non-rolling code button label inside the Rear Cover (FIG. 3).

5. Press the non-rolling code button B, C or D (FIG.3) that matches the appropriate code switch description on the label. The YELLOW LED next to the battery will begin flashing.

6. Press and release the Remote Button you want to assign to that opener—the GREEN LED on the remote will flash for approximately 2 seconds and stop.

7. Pressing the same button again will operate the opener—The RED LED on the remote will flash while the button is pressed.

 

D. Replacing the Battery. (Programming is not affected by battery replacement.)

1. Slide the Circuit Board Cover off the back of the remote (FIG. 3).

2. Slide the old battery toward the bottom of the remote and out.

3. Properly discard the old battery.

4. Slide a new (2032 size) battery into position and slide the Cover back on

 

E. Resetting the Remote

To return a Remote Button to its original Intellicode® 1 mode:

1. Slide the Circuit Board Cover off (FIG. 3).

2. Press the DEFAULT button—the yellow LED will flash.

3. Press the Remote Button you wish to reprogram. It's now Intellicode® 1 again.

 

 

Replacement Transmitter Recommendation
Model Number: GM3T-R
Part Number: 37344R
Description: 3-Button, Intellicode® 315/390 MHz
If you have any of the below transmitters, a replacement
transmitter can be GM3T-R.
GICTD-1 GICTD-3
GIT-1 or G2T-1 GIT-2 or G2T-2 2 GIT-3 or G2T-3
GICT390-1 GICT390-3 GMIC90-2 GMIC90-3
GIFT390-1 GIT390-4 GMI3
(flashlight)
GIFTD-1 GIFTD-3 GITD-3
(flashlight) (flashlight)
GIC90-1 GIC90-2 GIC90-3
GT-912 GT90-1 or GT90-2 or
GPT90-1 GPT90-2
GT90-3 or GT90-4 or MAT90-1 or
GPT90-3 GPT90-4 MAT-85

 

Questions & Answers

Ask a Question
  • Does the GM3T-R 3-BUtton Master Remote work with the GLX 9500-2 operating system?

    Yes it does! 

  • Does theGM3T-R WORKS WITH THE BLUE MAX

    Yes it does! 

  • Does it work with an older Model1S550/A system?

    Yes it will. 

  • Does the GM3T-R-#-Button Master REmote work with the Model# GCG350L garage door opener?

    Yes it does! 

  • Does it work with model ACSCTG TYPE 1?

    Yes it does! 

  • Does the GM3T-R 3-BUtton Master Remote work with the GXL9500 Screw Drive operating system?

    Yes, it does! 

  • Does this work to replace model AT 90?

    Yes it will. 

  • DOES THIS WORK WITH MODEL PCG700ML ?

    Yes, it will. 

  • Does it work on a ISL980/A

    Yes, it does!

  • DOES THIS WORK WITH MY GENIEPRO 88 - 1/3 HP SCREW DRIVE OPENER? IF NOT, WHICH REMOTE SHOULD I BUY?

    Yes, these will work!

  • Will this replace a Genie912 opener?

    Yes, it will. 

  • Will this work with the GICT390 model. Please let me know.

    Yes, it will!

  • Does this remote work with model PMX500IC/B

    Yes, it does!

  • Hi, is there another option like a 1 button remote, because I don't need a 3 button remote (I don't want to pay for something I will not use ) I'm trying to get 2 remotes for a reasonable price. Thank you

    For a dip switch style remote, this is the only one we have.

  • does this remote operate a G-5050 Genie opener?

    Yes, it does!

  • What are the physical dimensions of this remote?

    This remote is 2" x 3 1/4" x 3/4".

  • Does this remote work with the model PCG709ml?

    These remotes will work with the Genie PCG series garage door openers.

  • Will this remote work with Genie Screw Drive 1/3 HP Model SD 8000 garage door opener?

    Yes, it will.

  • Does it work with the AT90? 12 switch genie?

    Yes, it does!

  • I need at least 2 preferably 4 remote openers for a Genie Pro Model 1024. What do you recommend?

    If you have just one garage door opener to control, I would recommend the G1T-BX remotes. We have a two pack bundle at a lower price. The bundle pack is part 39907R. If you have more than one garage door opener, then you can use the G3T-R remotes, which we also have a two pack bundle at a lower price, part number 39904R.

  • Does the GM3T-R 3-BUtton Master Remote work with the G5050CL operating system?

    Yes, it does!

  • Will this remote replace a Genie Medallion Series Model No. GMT903 ?

    Yes, it will!

  • does it work with the Model H8000-07M

    Yes! These GM3T-R Genie Master Remotes will work with the Genie Model H8000-07M garage door opener.

  • I need a replacement remote. The model number for the one that stopped working is GT90-1. FCC ID: B8Q GT 50. It's a really old garage door opener that came with the house. Can you tell me which remote will work?

    To replace the GT90-1 remote you can use this Genie Master Remote, GM3T-R.