{"id":1716390232179,"title":"Optical Encoder (RPM Sensor) 39360R.S- Belt\/Chain Drive Models","handle":"optical-encoder-rpm-sensor-39360r-s-belt-chain-drive-models","description":"\u003cp\u003eThe Optical Encoder also called the RPM sensor, is used in certain Genie model chain and belt drive garage door openers. (See below for compatibility) Replacing the Optical Encoder may resolve the issue of short travel problems or drifting limits on the garage door opener. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with models; 3024, 4024, 3022, 3042, 4022, 4042, ChainMax 1000, SilentMax 1000, SilentMax 1200, IntelliG 1000, IntelliG 1200\u003c\/li\u003e\n\u003cli\u003eIf you do not see your model on this list and have questions please contact Genie for compatibility questions\u003c\/li\u003e\n\u003cli\u003eGenuine Genie Replacement Part \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e39360R.S DC Opto Replacement Instructions- For Belt \u0026amp; Chain Operators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions.pdf?4659\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Printable instructions for replacing the 39360R.S Opto Sensor \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThese instructions are written assuming that you will have ample room around Opener to perform this repair. Some rare instances will require removal of the unit from it’s mounting hardware and repair made on a bench or floor. Refer to your Owners Manual or Installation Poster for proper assembly and carefully read and understand all warnings and cautions pertaining to your unit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eBE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE OPENER PRIOR TO REMOVING THE MOTOR COVER.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTools required: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard slotted and Phillips head screwdrivers, small slotted screwdriver, 5\/6” socket or nut driver.\u003c\/p\u003e\n\u003cp\u003e1. Pull emergency release cord on carriage to disengage opener to close door if necessary. (If unable to lower door using opener, use extreme caution manually closing door. Before pulling emergency release cord, make certain people and objects are clear of door opening.)\u003c\/p\u003e\n\u003cp\u003e2. Unplug opener power cord from power receptacle.\u003c\/p\u003e\n\u003cp\u003e3. Open lens cover by pressing middle tab inward and remove light bulbs. FIG. 1.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"39360R.S Opto, RPM sensor replacement instructions \" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/38631A.S_DC_Screw_Drive_Motor_Replacement_Instructions_figure_1_large.png?v=1562342187\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e4. Remove wall control and Safe-T-Beam wires from terminal block located on side of opener FIG. 1. Use small common screwdriver to press in on orange tabs while gently pulling wires from block. Mark wires to help facilitate replacement.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e5. Unplug any optional accessories such as the battery backup and\/or networking adapter.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e6. Remove two 5\/16” screws securing powerhead cover to chassis. FIG. 2.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/38875R3.S_Replacement_Circuit_Board_Fig.2_large.png?v=1558617231\" alt=\"Genie replacement Opto Sensor part 39360R.S instructions \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e7. Push cover forward slightly and allow the motor cover to swing down to access control board and wire harnesses.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e8. Unplug the following harnesses from the control board. FIG. 3.\u003cbr\u003e• Light harness\u003cbr\u003e• Motor harness\u003cbr\u003e• Opto harness\u003cbr\u003e• AC IN harness\u003cbr\u003e• Green ground wire to chassis (if equipped)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_Figure_3_large.png?v=1562954609\" alt=\"replacing the 39360R.S Genie opto (rpm) sensor \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e9. Powerhead cover can now be removed from opener chassis for repair. Special care should be taken to prevent damage to motion detector bulb located on bottom of motor cover. (If equipped).\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e10. Check opto harness board connector. If it matches the 6 pin harness attached to replacement opto assembly proceed to step 11. If the harness is a 4 pin type, replace harness with 4 pin type harness included with the kit. Install opto end of harness to opto plug A.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e11. Remove the 2 opto cover screws from bottom of motor and discard opto assembly. FIG. 4\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_Figure_4_large.png?v=1562954724\" alt=\"Genie opto encoder replacement instructions part number 39360R.S\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e12. Install replacement opto assembly onto motor. If necessary, orient opto wheel slightly to align engagement lugs with motor lugs. FIG. 5. (DO NOT remove mylar cover). Opto assembly should easily fit flush with motor. Install screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_Figure_5_large.png?v=1562954760\" alt=\"39360R.S Genie opto encoder replacement instructions \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_harness_installation_large.png?v=1562954824\" alt=\"39360R.S Opto Encoder (RPM Sensor) Replacement instructions \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e13. Hang powerhead cover to chassis to connect all harnesses removed in step 8. Be certain to install all harnesses in the correct position being sure to install with locking tabs facing each other. FIG 3\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e14. Swing powerhead cover up onto chassis and secure using screws removed in step 6.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e15. Install wall control and Safe-T-Beam wires. Install battery backup and\/or network harnesses if applicable.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e16. Install light bulbs and close lens cover.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e17. Reapply power to the Genie garage door opener.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e18. Limit controls may require adjustment and full function test should be performed. Refer to owners manual for detailed information. Visit our website for installation and programming instructions.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eNOTE: If the garage door runs only short travel, recheck opto harness connections.\u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2018-10-15T12:06:29-04:00","created_at":"2018-10-15T12:11:28-04:00","vendor":"The Genie Company","type":"Service Parts","tags":[],"price":1999,"price_min":1999,"price_max":1999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16941193789555,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"39360R.S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Optical Encoder (RPM Sensor) 39360R.S- Belt\/Chain Drive Models","public_title":null,"options":["Default Title"],"price":1999,"weight":91,"compare_at_price":null,"inventory_quantity":997,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/39360r.jpg?v=1540410054"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/39360r.jpg?v=1540410054","options":["Title"],"content":"\u003cp\u003eThe Optical Encoder also called the RPM sensor, is used in certain Genie model chain and belt drive garage door openers. (See below for compatibility) Replacing the Optical Encoder may resolve the issue of short travel problems or drifting limits on the garage door opener. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with models; 3024, 4024, 3022, 3042, 4022, 4042, ChainMax 1000, SilentMax 1000, SilentMax 1200, IntelliG 1000, IntelliG 1200\u003c\/li\u003e\n\u003cli\u003eIf you do not see your model on this list and have questions please contact Genie for compatibility questions\u003c\/li\u003e\n\u003cli\u003eGenuine Genie Replacement Part \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e39360R.S DC Opto Replacement Instructions- For Belt \u0026amp; Chain Operators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions.pdf?4659\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Printable instructions for replacing the 39360R.S Opto Sensor \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThese instructions are written assuming that you will have ample room around Opener to perform this repair. Some rare instances will require removal of the unit from it’s mounting hardware and repair made on a bench or floor. Refer to your Owners Manual or Installation Poster for proper assembly and carefully read and understand all warnings and cautions pertaining to your unit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eBE SURE ELECTRICAL POWER HAS BEEN DISCONNECTED FROM THE OPENER PRIOR TO REMOVING THE MOTOR COVER.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTools required: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard slotted and Phillips head screwdrivers, small slotted screwdriver, 5\/6” socket or nut driver.\u003c\/p\u003e\n\u003cp\u003e1. Pull emergency release cord on carriage to disengage opener to close door if necessary. (If unable to lower door using opener, use extreme caution manually closing door. Before pulling emergency release cord, make certain people and objects are clear of door opening.)\u003c\/p\u003e\n\u003cp\u003e2. Unplug opener power cord from power receptacle.\u003c\/p\u003e\n\u003cp\u003e3. Open lens cover by pressing middle tab inward and remove light bulbs. FIG. 1.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"39360R.S Opto, RPM sensor replacement instructions \" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/38631A.S_DC_Screw_Drive_Motor_Replacement_Instructions_figure_1_large.png?v=1562342187\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e4. Remove wall control and Safe-T-Beam wires from terminal block located on side of opener FIG. 1. Use small common screwdriver to press in on orange tabs while gently pulling wires from block. Mark wires to help facilitate replacement.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e5. Unplug any optional accessories such as the battery backup and\/or networking adapter.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e6. Remove two 5\/16” screws securing powerhead cover to chassis. FIG. 2.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/38875R3.S_Replacement_Circuit_Board_Fig.2_large.png?v=1558617231\" alt=\"Genie replacement Opto Sensor part 39360R.S instructions \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e7. Push cover forward slightly and allow the motor cover to swing down to access control board and wire harnesses.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e8. Unplug the following harnesses from the control board. FIG. 3.\u003cbr\u003e• Light harness\u003cbr\u003e• Motor harness\u003cbr\u003e• Opto harness\u003cbr\u003e• AC IN harness\u003cbr\u003e• Green ground wire to chassis (if equipped)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_Figure_3_large.png?v=1562954609\" alt=\"replacing the 39360R.S Genie opto (rpm) sensor \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e9. Powerhead cover can now be removed from opener chassis for repair. Special care should be taken to prevent damage to motion detector bulb located on bottom of motor cover. (If equipped).\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e10. Check opto harness board connector. If it matches the 6 pin harness attached to replacement opto assembly proceed to step 11. If the harness is a 4 pin type, replace harness with 4 pin type harness included with the kit. Install opto end of harness to opto plug A.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e11. Remove the 2 opto cover screws from bottom of motor and discard opto assembly. FIG. 4\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_Figure_4_large.png?v=1562954724\" alt=\"Genie opto encoder replacement instructions part number 39360R.S\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e12. Install replacement opto assembly onto motor. If necessary, orient opto wheel slightly to align engagement lugs with motor lugs. FIG. 5. (DO NOT remove mylar cover). Opto assembly should easily fit flush with motor. Install screws.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_Figure_5_large.png?v=1562954760\" alt=\"39360R.S Genie opto encoder replacement instructions \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/39360R.S_Opto_Replacement_Instructions_harness_installation_large.png?v=1562954824\" alt=\"39360R.S Opto Encoder (RPM Sensor) Replacement instructions \"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e13. Hang powerhead cover to chassis to connect all harnesses removed in step 8. Be certain to install all harnesses in the correct position being sure to install with locking tabs facing each other. FIG 3\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e14. Swing powerhead cover up onto chassis and secure using screws removed in step 6.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e15. Install wall control and Safe-T-Beam wires. Install battery backup and\/or network harnesses if applicable.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e16. Install light bulbs and close lens cover.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e17. Reapply power to the Genie garage door opener.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e18. Limit controls may require adjustment and full function test should be performed. Refer to owners manual for detailed information. Visit our website for installation and programming instructions.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eNOTE: If the garage door runs only short travel, recheck opto harness connections.\u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}
Optical Encoder (RPM Sensor) 39360R.S- Belt/Chain Drive Models ,  Service Parts - The Genie Company

Optical Encoder (RPM Sensor) 39360R.S- Belt/Chain Drive Models

$19.99

The Optical Encoder also called the RPM sensor, is used in certain Genie model chain and belt drive garage door openers. (See below for compatibility) Replacing the Optical Encoder may resolve the issue of short travel problems or drifting limits on the garage door opener.  Compatible with models; 3024, 4024, 3022, 3042, 4022, 4042, ChainMax 10...


More Info