Is this opener suitable for use on garage doors with a Wayne Dalton Torquemaster torsion spring?
Yes this will work on a Wayne Dalton Torquemaster spring but requires the TorqueMaster adapter kit.
What size 120Vac circuit is recommended, how many amps?
The Wall mount unit uses a maximum of 4 Amps, so we recommend a dedicated circuit of at least 10 Amps for the Genie Wall Mount Garage Door Opener opener.
Can you tell me where the power cable exits the opener please. I’m installing outlets next week to power these. Thanks!
The power cable exits the opener on the bottom of the motor box.
Will this opener lift a 12 ft wide by 14 ft high non insulated rolling door or do you have a further recommendation?
This will not operate a rolling door, only a sectional door. For a rolling door, you would want to contact a Genie dealer in regards to commercial options. Use our dealer locator to enter your zip code to find one in your area.
Will this lift a door that is 10’ wide and 14’ high? My trailer needs 14’ of elevation to be parked in the shop. The door would be less than 850lbs.
Yes, it will.
Are these compatible with genie key pads
Yes, this wall mount would work with the Genie Wireless Keypad Pads that are compatible with all Genie Intellicode model garage door openers. Such as the GK-R, or the GUK-BX.
had a power surge need a instruction book do you have one i can print out?
You can view the manual for the Wall Mount Garage Door Opener here.
The 6070, if optioned with Aladdin Connect, will connect with my SmartThings Hub, correct? And can be used in SmartThings 'scenes' & 'automations'?
Yes, you are correct.
Sometimes in the summer we like to leave the garage door cracked open about 6 inches from the garage floor, will this wall mounted garage door opener let us do that? Thanks.
Yes, you can stop the door from closing all the way by pressing the wall console where you would like it to stop.
What if my current genie garage door system's torsion bar does not protrude more than 2.25 inches from bearing plate as needed according to the manual?( "The torsion bar shaft must protrude no less than 2-1/4” from bearing plate. (B)") What are my options at that point. Is the current bar adjustable?
The torsion bar has counterbalance springs that are under extreme tension and should only be serviced by a trained door technician. We would recommend contacting a Genie Professional Door Installer for adjusting options. You can locate a professional in your area here.
What is the expected average life of the 6170 backup battery? What is the price and part number for the 6170 backup battery?
The expected life of our battery backups is about three years. They could last longer. The replacement battery for the 6170 model wall mount garage door opener is part number 111658.0002.S.
Can a wall mount opener be used interchangeably for either side of the door or only on one side?
It can go on either side. When ordering the wall mount from the dealer you would need to specify which side.
This model 6170, is compatible with control4 system?
Yes, it is!
will this work on a roll up door .
No, it will not.
Will this work on a 9' door?
Yes, it will!
would this work on a Roll up door? Is there an instruction manual available online?
No, this will not work on a roll up door. It is for residential sectional doors only. Here is the owners manual for the Wall Mount Garage Door Opener.
I just had this installed seems to drag a bit when you start the clothes cycle like it's in a bind what should I look for to correct this or is it normal
It will have a soft start and stop. It should not be binding up, if you need assistance, please contact Genie customer service at 1-800-354-3643.
My jackshaft opener seems to be dragging or in a bind on the clothes cycle my opener seems to drag when it starts the clothes cycle
Please contact our customer service at 1-800-354-3643 for assistance.
From the shaft to top of opener measurement please, I'm cutting it close I think.
From the middle of the shaft to the top it is about 2.073". See below:
It states it will fit up to a 14ft door but it list a max lift height of 84 inches (7ft). Will it lift a 12ft door all the way open?
The Genie® Residential Wall Mount opener is intended for use on:
• Standard lift up to 14 feet tall, using industry-standard APCO 400.8, 400.12, and 5250.18 drums or equivalent.
• Hi-lift sectional doors up to 14 feet tall and 84 inches maximum of high lift using industry-standard APCO 400.54, 5250.54 and
500.84 drums or equivalent.
• Vertical lift doors up to 14 feet tall, using industry-standard APCO 850.11 and 1100.18 drums or equivalent.
• Doors up to 18 feet wide not to exceed 180 square feet and 850 lbs. balance weight.
• Only doors that use torsion springs with a torsion bar diameter of 1 in. solid or hollow 14 or 16 ga. tubular steel.
• Not compatible with low headroom outside hook-up, i.e. reverse-wound drums.
My 6070 was installed approx 4 months ago. Ive noticed a constant green glow from the overhead light when the light is off. Is this normal?
This is normal. The green LED indicates that the light fixture has 115V power.
can this opener be used with a "low head room" track door where the cable from the drum comes over the front of the front of the drum instead of the rear of the drum? Can the direction be reversed? Up would now be down and down would now be up????? Thanks!!
The wall mount garage door opener will work on Low Head-Room inside pickup, not outside pick up. The direction cannot be changed on the operator.
where can I purchase parts for the Genie 6070
You can get parts for the 6070 from your local Genie garage door opener dealer. You can locate a dealer in your area by your zip code.
Is the light activated when the sensor beam is crossed?
No it is not.
What is the motor run/start amperage? I understand the opener has a 6 ft cord to plug into a 120 volt duplex receptacle. I would need an extension cord of about 5 feet to reach the nearest outlet. So, would a heavy duty extension cord be acceptable? If so, what gauge wire?
No, an extension cord cannot be used. An outlet would need to be installed that the garage door opener can be plugged into. For more details please contact your local Genie professional dealer.
how , where do I find the model 6170 to purchase , cant find it anywhere ?
To locate a Genie garage door opener dealer you can enter your zip code in our dealer locator. If you are still having trouble please contact Genie customer service at 1-800-354-3643 for assistance.
were can I get one
You can get one at a Genie professional dealer. If you click the find a Genie dealer in the description of this product it will help you locate a dealer in your area.
How much space do you need on the side of the garage in order for this Opener to fit?
You would need 7 inches of side clearance.
will this work with a 15 ft tall x 14 ft wide insulated steel sectional overhead door
This garage door opener will work on garage doors up to 14 feet high and 18 feet wide that are well balanced and rated less than 850lbs.
Can this unit handle a 10' high door with a balance weight of 380 lbs (Wayne-Dalton Residential Wood Door)
Yes! This wall mount garage door opener will lift garage doors up to 14 feet in height and up to 850lbs in weight.
How is the electrical connection made? I didn't seen and cord in the photos.
There is a cord to plug in.
What is the MSRP for the 6070H wall mount opener
Please use the Genie dealer locator to contact a dealer in your area for pricing.
Is the Genie wall mount garage door opener compatible with Wayne Dalton garage doors?
Yes, it is.
Can you program a 3 Push Button Console on these units? The Stop Close and Open Commercial consoles?
No, the Open/Close/Stop button cannot be added to this Residential Wall Mount garage door opener.
Is the genie II WALL OPENER compatible with the Genie Pro
The Series II wall console (39165R) is compatible with the Genie Wall Mount model garage door openers.