Genie 2-Button LED Flashlight Remotes (2 Pack)

Will this remote replace my GIC903 remote ?

Yes, it will.

Is this work for PMX85

No, it will not. You would need the Genie Master Remote, model GM3T-R.

A few people have reported trouble removing the battery cover screw of the GLT2-BX. Is there a tool that can be used to avoid problems?

There is no special tool to remove the battery cover, just a screw driver.

Does this remote control work with the genie gxl-9500 ?

No, it will not. You would need the Genie Master Remote, model GM3T-R for the GXL-9500 model garage door opener.

Will this remote work with Genie Pro screwdrive model CM8600IC/A?

Yes, it will.

Will this remote work with the Genie Pro 98?

No, it will not. You would need the Genie Master Remote, model GM3T-R.

Hello, would this remote work with the Genie Model 6000A / receiver model ACSR3?

Yes, this will work with the H6000 model garage door opener.

Will this rotw work for G5050CL model?

No, it will not. The G5050CL would need the Genie Master Remote, GM3T-BX.

Will this work with an old Pre-1990 Model No. 459 Opener?

No, it will not.

Will this work with a 2560/m ascr3

Yes, it will.

Greetings. Just misplaced one of my remotes (sounds better than "Lost"), Model 1/2 HP H6000-07/M. Are these remotes compatible?

Yes! The GL2T-BX remotes will work with the H6000-07/M to replace your misplaced remote.

Hello, will this work with a 1993 Genie Blue Max?

No, it will not. The Genie Blue Max would work with a Genie Master Remote (GM3T-R).

Hi, I have the Genie Screw Drive garage opener, and have the garage opener remote with one button. I need another remote for my brother and was wondering if I purchase this remote and program it to my garage door opener, will it interfere with my current garage opener remote? Do I need to have to re-program that remote as well? Thanks

You can add a new Genie garage door opener remote and keep your old one working as well. You will need to program the new remote into the garage door opener.

Will this work with my Genie 3060?

Yes, it will!

Will this remote GL2T-BX work with Genie opener Model 4063B-TKV?

Yes, it will.

I miss placed my garage door opener if I purchase this garage door opener can I program it to work without having the old ones ?

Yes, you can program this remote to any Genie Intellicode model garage door opener without having the old ones.

Does the remote only work on genie products?

Yes, this remote will only work on Genie Intellicode model garage door openers.

Will this remote control work with a Genie 1/3 hp model CM7600ic door opener?

Yes, it will.

Will this work for model 2060L opener?

Yes, it will.

Is this remote compatible with. GICT390?

Yes, it is!

Will this work pro 82 3/1 horsepower screw drive.

No, it will not. You would need a Genie Master Remote (GM3T-R) for the Pro 82 model garage door opener.

Will this work on a 2020L model

Yes, it will.

Will this work on model 2128B?

Hi Kimmy,

Yes this 2 Pack of 2 Button LED flashlight garage door opener remotes will work on your Genie garage door opener model 2128B

Is this remote compatible with Model # IC250/B, receiver ACSR1. Thanks

Yes, it is.

Will this work on model H6000A?

Yes, it will.

I have 2 doors with Genie Pro 82 openers tombstone shape. Probably installed about 1991. I understand things changed in I993? Will these work for me?

The Genie Pro 82 model garage door opener used the fixed code style (dip switch) remotes. These will not work, you would need the GM3T-R, Genie Master Remote.

Will this remote work on a model 1035?

Yes, it will!

WILL THIS WORK ON THE MODEL NUMBER ACSR1G

Yes, it will.

Would this work on a IS550/A?

Yes, it will!

Will this remote work with Genie GCG350ML FCC B8Q ACSR1

Yes, it will!

Can this works on Genie GCG350L?

Yes, it will!

Will this remote work with model H4000A genie intellicode?

Yes, it will.

will these remotes work with Genie Pro screwdriver ? Model # CM7600C/A receiver model/ACSR3

Yes, they will.

Can you clip them on your visor in your car?

No, these do not come with the clips for the visor.

Is this compatible with “Linear LDO50”?

No, it is not.

Does it work Genie Model 2024 Professional Line

Yes, it does.

I have a single and double garage overhead door model 696CD/B with a CodeDodger 2 button remote (round & triangular). Each button opens one door. Will these work as replacements, and how do I program them? Thanks

On these two button remotes, only the top button will work with the 696CD/B model garage door openers. If you are looking for a remote that can open both garage doors, I would recommend using the G3T-R, Single or Two-Pack.

Will this remote work with genie model isd995

Yes, it will!

Will this remote work with Genie 2042?

Yes, it will!

Can’t get both working at the same time. When I program one the other stops working. Also using with wall button and home link in my car. Can you help!

It sounds like you have a garage door opener model that can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the powerhead up to seven.

You can also call 1-800-354-3643 for programming assistance.

Can this remote replace a GITR-3 remote?

Yes, it can!

Will this work with model Pmx500ic/b?

Yes, it will.

I purchased one of these sets and keep finding my garage doors open. Is there any way to make these things less sensitive? This is nuts. I can't have my garage door open all night, without my knowledge.

The most common cause for phantom operations would be a short in the wall button or shorted wall button wires (this can be caused by temperature changes, vibration, or power surges). or an issue involving the remote control or other wireless devices (keypad, built-in system in the vehicle).

Start troubleshooting by:

Removing the wall control wires and hard-wired keypad wires, if applicable, from the motorhead terminals. If unsure about which terminals on the operator powerhead are used for the wall control, consult the owner’s manual. This will eliminate both wires and the wall button. Leave disconnected for a reasonable amount of time to ensure that the problem is solved or reappears.

If the problem reappears while the wall control wires are disconnected, change the coding in the receiver and in the remotes. Leave them for a reasonable amount of time to ensure that the problem is solved or reappears

If the problem reappears, check for any stuck buttons on remote controls being used, and on any old remotes. remove the batteries from all remote controls. Again leave them inoperable for a reasonable amount of time to ensure that the problem is solved or reappears. Re-program or erase the receiver and re-program remotes (consult owner’s manual).

Check the down limit switch to make sure that it shuts the motor down after each operation. The door could be hitting the ground and automatically safety reversing. Always watch the door fully close and stop before driving off.

If the problem re-appears you would have a faulty circuit board that should be replaced.

If further assistance is required you can call us at 800-354-3643 and talk directly with a qualified Genie technician.

Will this work for Pmx5001c/b

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) will work with your Genie model PMX500IC/B garage door opener.

Will this remote work with genie excelerator model ISD 1000?

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) will work with your Genie model ISD1000.

What wireless wall remote will work with genie Pro 1024

Yes, you can use the Genie 2-Button LED Flashlight Remotes (2 Pack) with your Genie model 1024 garage door opener. You can also use any other remotes currently on our website with this opener.

Will this replace my G3T-A?

Yes, you can use the Genie 2-Button LED Flashlight Remotes (2 Pack) on a Genie garage door opener that uses the G3T remote.

Will this work with a pcg500ml?

Yes the Genie 2-Button LED Flashlight Remotes (2 Pack) will work with your Genie model PCG500ML garage door opener.

Do these work with the IMS 1000/A garage door opener?

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) will work with your Genie model IMS1000/A garage door opener.

Will this remote work with model PMX 300 IC?

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) will work with your Genie model PMX300IC garage door opener.

Hello. Will this work with a model IS900/A with a Receiver Model ACSRG?

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack)  will work with your Genie model IS900/A garage door opener.

does this work with model 3560

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) is compatible with Genie model 3560.

Will this work with my Genie Model IS550/A ?

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) is compatible with Genie model IS550/A.

will this remotes work on a model 3120H

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) is compatible with your Genie model 3120H.

Does this remote work with Genie Model 1042 Retail?

Yes, the Genie 2-Button LED Flashlight Remote will work with your Genei model 1042 garage door opener.

Will this remote work with the Genie IMS 1000/A?

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) is compatible with the Genie model IMS1000/A.

Will this replace Model GT90-3 2 button remote?

No the 2-button LED remote will not work in place of the GT90-3 remote. You would need the GM3T remote.

Does this remote works with model 2128

Yes, the 2-Button LED flashlight remote will work with your Genie Model 2128 garage door opener.

Will this replace a 1992 genie at95 remote dip switch remote ?

Hello. No, the 2-Button LED flashlight remote will not work in place of the at95 remote. You would need to purchase the GM3T remote.

Does it work with model 2020L?

Yes, the Genie 2-Button LED Flashlight Remotes (2 Pack) is compatible with the Genie model 2020L.

Will this remote work with SilentMax1000?

Yes, the Genie 2 button LED remote will work with your Genie Silentmax 1000 garage door opener.

Can these be used with last year’s 1035 model?

Yes, the 2 button LED flash light remote will work with your Geine model 1035 garage door opener.

is this remove compatible with Model 3120H

Yes, the 2 button LED flashlight remote will work with your Genie model 3120H garage door opener.

Will This Remote work with 3120H model ?

Yes, the 2 button LED flashlight remote will work with your Genie 3120H garage door opener.