Skip to product information
1 of 3

The Genie Company

Wall Console for Series II Product- 39165R

Wall Console for Series II Product- 39165R

Regular price $28.99 USD
Regular price Sale price $28.99 USD
Sale Sold out

Genies Multi-function wired garage door opener wall console Featuring Sure Lock Mode with new Slide Lock Design. Three-function wall console with a backlit panel that is easy to locate in the dark. Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation; newly designed switch helps prevent unintended activation of the lock-out feature. Handy programming card located in a holder on the console for quick reference.

  • Back-lit panel makes it easy to locate, even in the dark
  • 3 function buttons; open/close, lock, and lights
  • Works with all Genie garage door opener models that use Series II electronics
  • Quick and easy installation for replacement of any other Series II wall console 
  • Replaces discontinued Series II wall consoles and wall buttons: GBWC2-BX, GPWC-BX, GWC-2, GPWC-2WLB

 California Residents: Proposition 65 WARNING

SKU: 39165R

In Stock! Usually ships within 24 hours.

ASK A QUESTION View full details
Genie Series II Wall Console 39165R, GBWCSL2-BX
Wall Console for Series II Product- 39165R
$28.99

QUESTIONS & ANSWERS

Ask a Question
  • what indoor wall button is compatable with model H6000A opener?

    Please use either Series II wall console, 39165R or the Universal Push Button, 37644R

  • Is there a way to prevent the lock button from functioning. If accidentally hit, it locks out the remote and other keypad from working.

    The newer style Wall Console for Series II Product- 39165R has a slider switch, rather than a button for the lock.  This is much less likely to be triggered accidentally.  However, there is no way to disable the lock completely other than replacing the wall console with a standard Series II push button that does not have the lock or light feature.

  • I've got a circuit board labeled 27206A-R.0, which has four (4) terminals, labeled W, B, Y, G. Which wires twist together and go into the powerhead terminal #3, and which wires twist together for powerhead terminal #4?

    Sorry, the Wall Console for Series II Product- 39165R is not a compatible replacement for the 4 wire wall console.  The only replacement we have for the 4 wire wall consoles is the tan non-lit universal push button.

  • Is there a motion detection version of this console? One that turns on the light whenever motion is detected?

    Sorry, we do not currently have any motion detection wall consoles.  We do have some complete units that have motion detection sensors.   See below.

    Model 4042
    Model 4064H
    Model 4164H
    Model 4124H

  • Does this opener work with a model 1035 Genie ChainDrive 500?

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 1035.

  • I want to make sure that Wall Console for Series II Product- 39165R will work with Intellig 1000 model 3024

    For a 3024 model, if your wall button is gray with white/backlit red you will need the Wall Console for Series II Product- 39165R.  If you have a wall button that is gray with black buttons you will need Wall Console for Series III Product.

     

  • We currently have a genie series II 34026A-R1 wall console. What replacement will work with this? Our genie opener is genie professional line model 2024. Thanks.

    Yes, the Wall Console for Series II Product- 39165R is a compatible replacement for the Genie model 2024.

  • Is this the replacement for Genie Intellicode Overhead Garage Door Wall Button Series II Control - Unit Only. I can not seem to find a new one. Thank you

    Yes, the Wall Console for Series II Product- 39165R is the compatible replacment for a Genie series II wall control/console.

  • Is the Wall Console for Series II Product- 39165R compatible with a Model ISD995 opener?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model ISD995.

  • I have an old manual one button Genie opener. It has four wires coming it to the back. There are four terminal hook ups inside the unit. The button spring assembly is broken. Unit was installed in 1995 and has been perfect for years. Please advise on a suitable replacement I can attach myself. One that has the four wire connection inside.....206 778 3683

    Sorry we no longer have a 4 button wall console, we do have a non-lit tan universal button you can use.  You would only use the black and white wires, and not the other wires.

  • I have a Genie Intelli g 1000 with model number 3024. How do I tell if it is a series II or series III wall mount. I ordered one for series II but when I connected it, it would not work. The old one just has a short in the circuit board. I have now ordered a wall mount for a series III which states it will work since the serial number is "1122742116" If this one will work please advise if there is anything I have to do other than connect the new one to the existing wires. Thank you

    Hello, if your serial number starts with 11227 this is a series III unit and the series III wall button will work.  The only exception would be if the circuit board was replaced at some point after late 2012.

  • I have a genie Medallion opener model GXL10000cl what wall consoles are compatible with this model

    The compatible wall console for GXL10000CL is the 39165R Wall console.

  • Can 39165R replace 31230A-R0

    Yes, the Wall Console for Series II Product- 39165R is a compatible replacement for 31230A-R0.

  • I have an old wall console model 31230A=R0( for series 2 controllers) Will Wall Console for Series II Product- 39165R work?

    Yes, the Wall Console for Series II Product- 39165R is a compatible replacement for 31230A-R0.

  • I have Genie IS, ISL & IMS Series Complete with Genie Intellicode and Series II Electronics door opener. That's everything it says in the owners manual. Is this 3 function wall console compatible with my opener? FYI installed Feb 1997. Thank you.

    Yes, the Wall Console for Series II Product- 39165R is compatible with the IS, ISL and IMS series, that uses series II electronics.

  • Will this wall console work to operate and leave-on the lights of an Intellicode H4000a model?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model H4000A.  You will be able to operate the lights independently with the light button the switch and the lights will also operate when the door is operated and stay on for approximately 5 minutes following.

  • Will this work with the older Genie Excellerator model?

    Yes, the Wall Console for Series II Product- 39165R will work with the Genie Excelerator.

  • Is this 1024 pro compatible?

    The Wall Console for Series II Product- 39165R will work with your model 1024 only if the date code printed on the unit is 041217 and higher.  This is the bottom row of numbers on a two line sticker on the motor head (typically on the back under the access panel or on the top of the metal motor chassis).

  • is there a way to turn off the backlight this Genie series two wall console?

    The backlight is on permantly unless you lock the surelock on the console.  This will turn the light off while locked. Additionally, if you reverse wire the console, the backlight will not turn on at all, it you want it permanently off.

  • what indoor wall button is compatable with model ISD990 opener?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model ISD990.

  • What wired wall console do I need for model 7055D-TKSV?

    The correct wall console for Genie model 7055D-TKSV is the Wall Console for Series II Product- 39165R.

  • does this work with Model 2028

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 2028.

  • Can two of these be used on the same door in different locations?

    No, you can only have one wall console per unit.  However, you can have a non-lit universal pushbutton in addition to the wall console.

  • Is this compatible with the CM7600 Pro ?

    Yes, the Wall Console for Series II Product- 39165R (geniecompany.com) is compatible with Genie model CM7600IC.

  • Is it compatible with a genie model 3024?

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 3024 with serial numbers of 12250 and after.  You can also check to see if your current wall console is Gray with white/transluscent buttons, if so it is comnpatible.

  • Will this work on IS550/A (1/2 HP) models?

    Yes, the Genie Series II Wall Console with Sure lock is compatible with Genie model IS550/A.

  • what replacement control would I need to replace a 2280 series 2 ? Thank you

    The Wall Console for Series II Product- 39165R is a compatible replacement for any Genie series II operator.  We do not have a model 2280, is this perhaps a typo?  If so can you provide your model number?

  • Are multiple wall consoles supported? I have detached garage with an IS550 and the original, fully-functional wall console inside the garage. I would like to add the new wall console in the back porch.

    Sorry, unfortunately you can only wire one lit wall button or wall console to each unit.  You can keep one wall console, but the other button would need to be a non-lit tan wall button. Sorry for the inconvenience.

    Universal push button

  • Need remote for 2028 garage door opener

    The remote you would need for a 2028 model is the G3T remote for up to 3 garage doors.  You can also use a G1T if you need only one door usage.

  • I have 2 wall consoles wired in parallel (as it was with an older Genie opener) and everything works until the Sure-Lock switch is enabled then disabled. Once disabled the garage door only clicks as if the lock didn't disengage. Instructions doesn't mention wiring two units together and that's what I'm hoping to keep. The only way I can get back to working is to disconnect then reconnect a wire to a unit. How should these be wired? Thanks

    Sorry, unfortunately you can only wire one lit wall button or wall console to each unit.  You can keep one of the wall consoles you have, but the other one would need to be swapped out with a non-lit tan wall button. Sorry for the inconvenience.

    Universal push button

  • Wall console replacement for model # 2560

    Yes, the Wall Console for Series II Product- 39165R  is compatible with the model 2560.

  • will it work for model 7055?

    Yes, the Wall Console for Series II Product- 39165R  will work with a 7055.

  • Will this work with the is550-a?

    Yes, the Wall Console for Series II Product- 39165R is compatible with model IS550A.

  • Will this work with model 1022?

    The Wall Console for Series II Product- 39165R (geniecompany.com) is compatible with some 1022 models, but it depends on when the unit is manufactured.  If the 1022 was manufactured after the date code of 041217, which is the 17th week of 2012.  This date code can be found on the top or back of the motor head unit on a white sticker with two lines of numbers.  The date code is the bottom line on the sticker.  If your date code is 041217 or newer the 39165R wall console will work, if 041216 or lower the 39165R wall console will not work.

  • What wall console will work with the ISL 950/A and the IMS 1000/A?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the ISL950/A and the IMS1000/A.

  • Will wall open work with 1128b opener

    Yes, the 39165R wall console is compatible with the 1128B model.

  • I have a model 2027 Genie opener and want to buy remotes and switches but they don't list model numbers they usually say for series 11 electronics or Intellicode, or 9/12 switch openers. What one do I have? Thanks!

    The 39165R wall console will work with model 2027.  The remotes G1T and G3T are compatible with this unit, they are intellicode.

  • I have 2 wall consoles. One has a red light that always stays on and the other never goes on. Both consoles seem to work okay. Is the red light an indicator of an issue?

    No, the red light being on in the console is actually normal operation.  Your other wall console may need the wires on the back of it reversed.  This should fix the problem.

  • will this unit work with mod 4062?

    Yes, as long as your model has Series II electronics

  • would this work with the genie intellicode transmitter model pro952c/a

    Part number 39165R is compatible with model number PRO95-2IC

  • will this work with the the pro-952c/a

    Yes, it is compatible.

  • Replacement wall control for isd 990

    You can use the 39165R wall console for the ISD990 garage door opener.

  • My garage door opener is a Model H6000-07. Will this wall mount control work with it?

    Yes, it will.

  • is it compatible with Model number 2024

    Yes, it is.

  • The genie multi function wall console, was put on the lock position, how to open the garage door? None of the remotes are working.

    You will not be able to use the remotes or any wireless device to open the garage door until the lock is turned off on the wall console.

  • what wall console is compatible with Genie model 1035?

    The 39165R Series II wall console is compatible with the 1035 model.

  • Is this compatible with IS550/B?

    Yes, it is.

  • Wall Console for Series II Product- 39165R: Will this work with the Genie Blue Max model 12A frequency 390?

    No, it will not.

  • is this console compatible with model 37282rr?

    Yes, it is.

  • Is this compatible with cm7600ic/a

    Yes, it is.

  • Will this work on a destiny 1200?

    This would depend on the date the Destiny 1200 was made. There is a time from 2010 through 2012 that the Destiny 1200 would have been a Series III circuit board, which had a Series III wall console. If your current wall console has black buttons, this would be a Series III - which means the Series II 39165R will not work. If your current wall console has white buttons- this would be Series II and then Yes, this 39165R wall console will work. If you are not sure, or would like more assistance, you can contact our customer service at 1-800-354-3643.

  • Will this work with opener Model 3060L-07/M? Thanks

    Yes, it will!

  • Will this work with model gcg350L

    Yes, it will!

  • Is this compatible with model 2033?

    Yes, it is!

  • Is this compatible with the model CM8500 opener?

    No, the CM8500 used a four-wire wall console. We no longer offer a four-wire wall console, however, you can use the Universal Push Button on the CM8500 model.

  • Which replacement wall console will work with the BlueMax model CM 8500-S door that has the locking feature?

    No, it will not. We no longer have a 4 wire wall console replacement with the locking feature. The universal push button can replace the wall console for the BlueMax models, but you will not have the light or lock functions.

  • Is this compatible with CM 8500-S?

    No, it will not.

  • Which wall console is compatible with Genie Intellicode IS 550/A?

    The 39165R Series II wall console will work with the IS550/A model.

  • Is this compatible with model 4560?

    Yes, it is.

  • My Garage door opener model no is IMS 1000/B..1/2 HP and what is the replacement part for wall console (27206A-R1, PC-A-_P92-94V-0) this is the no shown on circuit board. it has 4 wire connections Black, yellow, white and green

    We no longer have a four-wire wall console. You can use the universal push-button for the IMS1000/B model garage door opener.

  • I have 2 CM7600IC/A openers that were controlled by a simple 2-push button switch when we bought this house 3 years ago. The push button switch has worn out and I want to replace with Genie Series II wall mount switch. Is it compatible AND do I need two wall console units, one for each door, or can one unit control both of my garage door openers?

    Yes, it is compatible. You would need a separate one for each door.

  • Is this compatible with a Model 6170 wall mount opener?

    Yes, it is.

  • Is this compatible with the PCG 700ML

    Yes, this series II wall console will work with the PCG700ML garage door opener.

  • Is this compatible with a Genie Pro Stealth model?

    Yes, it is.

  • Is the Wall Console GBWCKSL-BX part# 39165R compatible with my old one GPWC-2WLB part# 34299R ?

    Yes, it is.

  • How do I adjust the light timer from the wall unit. I replaced my old GPWC-BX part# 37351R and the new opener keeps the light on for about 4 minutes. But works great otherwise.

    You cannot adjust the light timer. When the garage door opener opens or closes the door, the light will stay on for 5 minutes.

  • Is this compatible with Genie pro Max model pmx5001c/B

    Yes, it is!

  • I have a model 1020L-390, will this product work for my opener?

    Yes, it will.

  • Are their any wall consoles that will work with the 4 wire GXL9500 opener and still give full functionality. I assume the 2 wire consoles will only open and close the doors? I was told that the 39165R would work with my GXL9500 but mine has 4 wires and the 39165R only has 2.

    We no longer have a 4-wire wall console. You can use a universal push button to open/ close the garage door. You would wire two wires to each terminal on it.

  • Is this compatible with 2020l model

    Yes, it is!

  • I would like to install a second wall mount at a second entry location. How do I wire this?

    You cannot use two of these Series II wall consoles at the same time. What model is your garage door opener?

  • Can this be used as a second wired console with the 7055 opener?

    No, you cannot use to Series II wall consoles wired together. You can add a wireless wall console or universal push button to the 7055 and still keep the Series II wall console installed as well.

  • Does Genie offer a wall mounted controller that is motion activating for turning on the light? Opener is Model 3055

    No, we do not have a wall console that is motion activated.

  • My H8000D has lifetime warranty. How do I get parts without being charged. I need new wall controller 39165R. In the past they sent me one at no charge.

    For warranty assistance please contact Genie customer service at 1-800-354-3643.

  • Will this wall console series II product - 39165R work with garage door opener 1/2 HP model PMX500IC/B ?

    Yes, this series II wall console will work with the PMX500IC/B model garage door opener.

  • Is this compatible with model CM8600 IC/A

    Yes, it is.

  • is this compatible for MOdel 2028? how can i program a new console when i order a new one?

    This wall console does work with the 2028 garage door opener. The wall console wires to the powerhead, no programming is required.

  • can i use a 2nd wall console at a side entrance garage door to operate the light? I will still use the original wall console to operate the light and open the door. I have 2 powerlift 900 openers, each with a separate wall console. this would mean one opener would have two wall consoles. is that possible? thank you

    Is your current wall console a series II or series III? (Does it have white or black buttons)?

  • I thought I saw the button that turns the light on/off light up at one point, but it's not doing so now. Is it supposed to light up, or did I just imagine this?

    There is a red LED light behind the button that opens/closes the garage door (there is not a separate one that is behind the light switch). Is that LED light on?

  • Is this compatible with Genie cm8600ic/a

    Yes, it is!

  • Is this compatible with the Genie Intellicode system?

    We would need to verify the model of your garage door opener. Do you know which model you have? The model number should be under the light bulb cover.

  • i have this unit what is its replacement GENIE INTELLICODE WALL BUTTON SERIES II 2 PC CONTROL 31230A-R0

    The 39165R is the Series II wall console replacement.

  • Is this compatible with Model 5053 belt drive

    This wall console will work with the 3053 model garage door opener.

  • I have a pro 88 series genie which is dated before 1993. I need to replace the wall console part # 27884-R . Which wall console could replace this? Thanks.

    We no longer have a four wire wall console. You can use the Universal Push button to operate the Pro 88 model.

  • Is this compatible with Model H6000A?

    Yes, it is!

  • Are the dimension the same on the GBWCSL2-BX as the GPWC-BX that I am replacing? Will it fit inside the same outlet box?

    The GPWC-BX measures 4.75 inches tall, 2 7/8 inches wide,  1 inch in depth at the thickest point. The GBWCSL2-BX measures 4.25 inches tall, 2.25 inches wide,  7/8 inch in depth at the thickest point.

  • Is this compatible with the IS,ISL and IMS series?

    Yes, it is.

  • Can the console be programmed to automatically close the door after a set period of time?

    No, it cannot.

  • Is the Wall Console for Series II Product- 39165R compatible with the PowerMax 1500 Revolution Series Model 4062? If not, what is another console that would be compatible with the above referenced opener?

    Yes, it is.

  • Is this wall console available at a local retailer?

    It is not carried in the local home stores. You may be able to get one from a Genie garage door opener dealer in your area.

  • Is this compatible with the Series II door open/close button that is no longer any good on my Genii iS 550/A opener? It has two wires, one red and one white I believe.

    Yes, this Series II wall console will work with the IS550/A model garage door opener.

  • Does this replace a Genie Promax 2- 34520A?

    This will work with the Genie ProMax 2.

  • Will this work with model 2040L

    Yes, it will!

  • will this work with a older 3060l model?

    Yes, it will!

  • Can I use the Aladdin app with this ?

    You can use the wall console if you have Aladdin Connect hooked up, but you cannot use the wall console with the app itself. It will not connect to the app, on the Aladdin Connect add on or integrated Aladdin Connect will work with the app.

  • Will this work with model 3055?

    Yes, it will!

  • I have a Medallion Series Genie Intelcode, model number ACSR3G. It says to use with series ll control only. Will this controller work with what I have installed now?

    Yes, this Series II wall console will work with your garage door opener.

  • Is this compatible with a Model 4024 - Inteli G-1200 unit? Thanks.

    Yes, it is, however, if you currently have a wall console that is gray with black buttons though, you would need the Series III wall console, not this Series II.

  • Is it compatible with overhead door model 496cd/b

    Yes, it is.

  • Is this compatible with genie model 2020L? Also does the light button feature allow the light to stay on or is it still on a timer bases

    Yes, it is. When you use the wall console to turn the light on, it will stay on.

  • Is this compatible with the ISL950/A garage door opener? I'm hoping to replace the "Universal Push Button" button currently installed. Thanks!

    Yes, it is.

  • Is this compatible with the Genie Enduradrive 2562 Model?

    It is - as long as you had the Series II previously. There was a change and some had the Series III (which had black buttons), and some had Series II (white buttons). If you currently have the Series II with white buttons, this will work. If you have the Series III (with black buttons) and have not changed the circuit board, you would have to replace it with another Series III.

  • Is this switch compatible with Genie Excelerator ISD 1000?

    Yes, it is!

  • My wall console 34026A-R1 for Series II controls is malfunctioning. Your current item #39165R is the replacement part, right?

    Yes, it is.

  • Is this compatible with model PRO 951C/A

    Yes, it is.

  • Is this compatible with Wayne Dalton Quantum garage door opener?

    No, it is not.

  • What are the dimensions of the console?

    4.25" x2.25" x 1"

  • Can you have 2 of the 39165R in parallel ? I have 2 "people " doors and would like one at each?

    No, you cannot have two series II wall consoles running parallel. You can add a universal non lit push button in parallel with the series II wall console.

  • Is this the inside wall console for model h8000d-2k

    Yes! This wall console will work with the H8000D-2K model garage door opener.

  • We have a PMX500IC/B unit. Will this indoor opener work with it?

    Yes, it will!

  • Is this compatible with Genie Pro Stealth/MAX model PMX300IC/B ?

    Yes, it is!

  • I have the Genie wall console series II. I tried turning on the lock switch but it does not lock out the remotes and keypad. What am I doing wrong? It only works sometimes.

    When you turn on the vacation lock on the wall console it will allow you to close the door one time with the remote, keypad, or wall console. Once the door is closed, it should not allow you to open the door with any of the wireless devices. If it is allowing you to do this, please contact Genie Customer service at 1-800-354-3643 for assistance.

  • Is this compatible with model 1128?

    Yes, it is!

  • Is this compatible with a Model 1024?

    This depends on when the 1024 was made. Please contact Genie customer service at 1-800-354-3643 for assistance.

  • Does genie make a wall mount button for series 2 that has a motion sensor light switch

    No, we do not.

  • Will this model be compatible with Genie Blue Max Model 12A?

    No, this will not replace a 4-wire wall console.

  • Which wall console is compatible with Model 1024 Genie Pro garage door opener?

    For the 1024, it depends on what the serial number/ date code of your garage door opener is. Please contact Genie customer service at 1-800-354-3643 for assistance.

  • Will this wall opener work with model 2024 professional line model

    Yes, it will!

  • is this comparable with model 2020L

    Yes, it is!

  • Is this compatible with a 4wire GPWC-2WLB

    No, this will not work as a replacement for the older 4 wire wall console. The universal push button will replace the 4 wire wall console.

  • I currently have a pro 82, is this wall unit compatible?

    No, this will not work with a Pro 82. The only thing we have to replace the four wire wall console is the universal push button.

  • is this compatible with the professional line II 650?

    Yes, it will!

  • Will this replace product code1047 / model GPWC-2WIC ? My opener is a model IS900/B.

    This series II wall console will work with the IS900/B model garage door opener.

  • P.S. to question I just sent: My existing wall console has 2 wires, open & close buttons on front, & lock on top of unit.

    This new one will also have those features and is a two-wire wall console. It will work with your Pro95 IC/A model.

  • Is this wall console compatible with model PRO 951 C/A (Genie Pro Automatic Screw Drive Opener/Operator System w/Genie Intellicode Transmitter & Series II Electronics) ? If not, is there a compatible wall console available? If so, what's the part # ?

    Yes, this Series II wall console will work with the Pro95 IC/A model garage door opener.

  • Will this replace my wall unit for a 1995/96 Overhead Door Legacy? It's a simple pad with sliding lock at top, a light function button on left and door up/down button on the right. Thanks

    Yes, it will!

  • Please indicate console switch for Model H6000-07. Thank you

    You can use the Series II wall console, 39165R. 

  • Will this work with the Genie PRO88-S?

    No, this will not. For the Pro88 model garage door opener, we have the Universal Push Button that would work.

  • Can I install (2) wall consoles for (1) opener? Or am I only limited to (1) wall console. Opener Model 7055, Thank you for your time and consideration

    You can only use one of the Series II wall consoles. You can add an additional Wireless Wall Console (39902R) or a Non- lit Universal Push-button (37644R).

  • Does this wall console work with IS900/A. Thanks.

    Yes, it does!

  • Will this replace a bad wall mount control for a SilentMax 1000 Model 3042

    Yes, this will work with a 3042 model garage door opener as long as your current one was a Series II model. If your current wall console is grey with white buttons, this will replace it. If you are not sure or have a wall console with black buttons, that would be a Series III model- you can contact Genie customer service at 1-800-354-3643 for more details.

  • Is this compatible with IS550/a? I'm unsure of that's a series 2

    Yes, this will work with the IS550/A model.

  • I need a replacement Wall Console for my H6000A Genie ?

    You can use the 39165R Series II wall console for the H6000A.

  • Will the 39165 R work with Model H8000-07 garage door opener?

    Yes, it will.

  • Will this work with an ISD995?

    Yes, it will!

  • Is wall control model GBWCSL2-BX compatible with Genie screw drive model GXL9500 CL?

    No. This will not work with the GXL9500 CL.

  • Is this compatible with GXL9500 CL?

    No, this will not work with the GXL 9500's.

  • is Model GBWCSL2 compatible with GXL9550?

    No, this will not work with the GXL9550.  You can use the universal push button.

  • Is this compatible with the Genie 8000D Garage Door Opener?

    If it is the Genie model H8000D, then yes this wall console is compatible.

  • Is this compatible with the 2022 model?

    Yes, it is.

  • Is this compatible with model # GXL-1000_2MS. The wall mounted switch that came with it has 4-wires. was purchased in1995.

    No, the 39165R wall console will not replace the 4-wire wall console. You can replace the 4-wire wall console with the universal push button, 37644R.

  • Is this compatible with model 2022? If not could you tell me which one is.

    Yes, it is!

  • Is the Wall Console for Series II Product- 39165R compatible with Genie Model 3060L-07?

    Yes, it is. 

  • Is it compatable for GeniePro Stealth /Max Serial Number PMX5001C/B?

    Yes, it is. 

  • Is this Wall Console for Series II Product- 39165R work on Model #IS550-A?

    Yes, it will. 

  • is this compatible with Excelerator D990 ?

    Yes, it is. 

  • Is this compatible with Model 2028 ?

    Yes, it is!

  • Is this compatible with model CM7600 ic/a? I would like a wall console with a separate button to turn on the light. Thanks

    Yes, it is! 

  • is it compatible with model 2060 wall mount #GWC-2w

    Yes, it is. 

  • Is this compatible with CM8600-1C?

    Yes, it will. 

  • the part number i want is GPWC-2WLB is this still available ?

    No it is not. This one replaces it. 

  • will this work with GCG,PCG,H intellacode series II?

    Yes, it will. 

  • will this work for Genie model 2042 ?

    Yes, it will. 

  • Is this compatible with H 6000

    Yes, it is! 

  • Is this compatible with Genie Intellicode wall console that is wired with two buttons and one slide lock out on top?

    Yes, this would replace that one. 

  • Need wall console for Genie Excelerator 3531835447. Which one will work? Thanks

    You can use this series II wall console. 

  • Is this compatible with the 1000 series?

    Yes, it is. 

  • Is this compatible with GXL9550? My unit is about 23 years old.

    No, this will not work with the GXL9550. You can use the non-lit universal push button- 37644R.

  • Is this compatible with opener Model H4000-07/M? Thanks.

    Yes, it is. 

  • Is this compatible with model 1028?

    Yes, it is! 

  • I have a Genie screw drive opener model 4560. I need need to replace the wall console (GWC-2R) What is compatible with this item

    You can use Wall Console for Series II Product- 39165R.

  • Is this compatible with chamberlain openers?

    No it is not.

  • I installed 3155D opener .Easy install however back lit on the wall opener does not illuminate

    If the wall console/button is not illuminating, the wires on the back of the wall console are most likely reversed.  Try flipping the wires around and it should light.  Let us know if you are still having issues.

  • Will this work with model 1055B belt drive opener?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the 1055B.

  • Regarding Wall Console for Series II Product- 39165R. I've installed and open/close and light button works fine. However, there is no backlight. What could be wrong?

    If the wall console is working but there is no LED, it may just be that the wires need reversed. Remove the wall console from the wall and take the wires off the back and put them on the other screws. The LED should then light up. If it does not, please verify that your vacation lock is off.

  • The backlit function is not on. Is my unit malfunctioning or do I need to do something to turn it on. The unit is brand new.

    Please remove the wall console from the wall and switch which screw each wire is on, on the back of the wall console.

  • Will this fit my Genie Models 1028, 2028?

    Yes, the Wall Console for Series II Product- 39165R will work with your Genie model 1028 or 2028 garage door opener.

  • Is this opener compatible with the Genie Model 6170H-B Pro Series wall mount motor? If so what type of wire does it require?

    Yes, Wall Console for Series II Product- 39165R will work with your Genie model 6170H-B garage door opener.

  • What wall console will work on a PRO99-21C?

    Yes, you will need the Wall Console for Series II Product- 39165R to use with your Pro99-2IC garage door opener.

  • i have a model 7055 S/N 172012120547AH; is this compatible?

    Yes, the Wall Console for Series II Product- 39165R will work with your Genie model 7055 garage door opener.

  • I have an older Genie Max Pro model PMX500IC/B. I need to replace the wall console. What item will work with my older model?

    Yes, the Wall Console for Series II Product- 39165R will work with your Genie model PMX500IC/B

  • Will this work with a unit silent max 1000/1200,model# 3042, serial# 140414110344AE?

    Yes, the Wall Console for Series II Product- 39165R  will work with your Genie model 3042 garage door opener.

  • What wall switch is needed for our model PMX5001 C/B ?

    Yes, the Wall Console for Series II Product- 39165R will work with your Genie model PMX500IC/B garage door opener.

  • does wall console 39165R work on genie promax chain glide 2 model #PCG700ML?

    Yes, the Wall Console for Series II Product- 39165R will work with Genie model PCG700ML garage door opener.

  • Does 39165R wall console work with PMX500IC/B?

    Yes, the Wall Console for Series II Product- 39165R will work with your Genie PMX500IC/B.

  • Is this compatible with the genie 2055 belt drive?

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 2055.

  • dose this work with model 7055

    Yes, the Wall Console for Series II Product- 39165R will work with your Genie model 7055 garage door opener.

  • Will this controler work on a 6072h-O

    Yes the Wall Console for Series II Product- 39165R will hard wire into your Genie model 6072H-0 garage door opener.

  • will this work for model 2028?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model 2028.

  • Hello, I am looking for a replacement wall console for my ISD990 Genie Excelerator. Is this console compatible?

    Yes, you would need the 39165R wall console to use with your Genie model ISD990 garage door opener.

  • Will this work with a Genie ProMax ACSR1G opener?

    Yes, the Wall Console for Series II Product- 39165R is compatible with a Genie model Promax ACSR1G.

  • Does this work with door opener model 1s550a?

    Yes, the 39165R wall console will work with your Genie model IS550 A garage door opener.

  • is this compatible with model 3024?

    If your current wall console is gray with white buttons you can use the 39165R wall console. If your current wall console is gray with black buttons you will need the 37222R wall console.

  • Is it wall console compatible with model 2055?

    Yes, the 39165R Wall console will work with your Genie model 2055 opener.

  • Is this opener compatible with models 1028 and 2028?

    Yes, you can use the 39165R Series II wall console with your Genie 1028 and 2028 openers.

  • does this work with Genie 1028 model?

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 1028.

  • Does this wall console work on the Genie model 2042?

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 2042.

  • Does this console match up with the model 3055?

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 3055.

  • Is this console compatible with Genie H4000-07 opener?

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model H4000-07.

  • Is the wall console 39165R for Genie garage door opener model isd 1000 not sure if previous question was sent

    Yes, the Wall Console for Series II Product- 39165R is compatible with the ISD1000.

  • does this wall console work for model ISD 1000?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model ISD1000.

  • Is this compatible with Model 1128?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model 1128.

  • Which indoor wall console for the 3055 model is compatible?

    The Wall Console for Series II Product- 39165R is compatible with the Genie model 3055.

  • Is this console compatible with the Professional line 2028 model?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model 2028.

  • Will this work model 3055 opener.

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model 3055.

  • Does this console 39165R work with the Intellicode model ISL950/A

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model ISL950/A.

  • Can 2 of these Wall Consoles for Series II Product- 39165R, be attached in parallel to my 20+ yr. old Genie Screw Drive Garage Door Operator (IS, ISL,IMS Series) with Series II Electronics, such that I can run the Operator from 2 locations in my garage? I tried to hook up one in parallel with my existing Wall Console, and it would not work.

    Sorry, you can only have one Series II wall console per garage door opener.  You can however, add additional Universal Non-lit pushbutton(s) to one garage door opener.

  • what indoor wall mount button is compatible with Model 3042 opener

    For a 3024 model, if your wall button is gray with white/backlit red you will need the Wall Console for Series II Product- 39165R.  If you have a wall button that is gray with black buttons you will need

    .

  • I have the Genie Series 2028 RilaG 850 and the series II wall console. The garage door still operates even when the position switch is set in the locked position. We have tried to replace the wall console and have checked all the other associated hardware. Does anyone know why the door would still operate in the locked position?

    The door will close a last time when the Wall Console for Series II Product- 39165R is locked.  So, in other words if the door is opened, it will close and then lock (and not reopen).  If partially opened, it may fully open and then close (and not reopen).  If the wall console is still opening the door from the fully closed position, after being locked, the Wall Console for Series II Product- 39165R may need replaced.

  • Can two of these be hooked up in parallel so I can have one at the garage door and one at the man door?

    No, you can only have one Wall Console for Series II Product- 39165R per garage door opener.  However, you can add additional Universal Push Buttons.  

  • Does this Wall Console work with Model GXL9550

    No, sorry unfortunately the only wall button we have available for Genie model GXL9550 is the tan non-lit pushbutton.

  • Will this work for Genie PRO Screw Drive Model CM8600 IC/A ?

    Yes, the Wall Console for Series II Product- 39165R is compatible with your Genie Model CM8600 IC/A.

  • is this compatible with cm8600? I am particularly interested in controlling the light

    Yes, the Wall Console for Series II Product- 39165R is compatible with Genie model CM8600IC.

  • is this wall mount compatible with Model #4062?

    Yes, Wall Console for Series II Product- 39165R is compatible with your Genie Model 4062.

  • Does the Wall Console for Series II Product- 39165R fit the IS900/A ?

    Yes, the Wall Console for Series II Product- 39165R is compatible with the Genie model IS900/A.

  • Does this replace the wall console that came with my IS920-2? Intellicode series II. Or can I get a replacement PC board for the console? Just needs a new switch on the board 31230A-R0, PC-Ax-P92-94V-0, SERIES II.

    Yes, the Wall Console for Series II Product- 39165R is a compatible replacement wall console for the Genie model IS920-2.

PDF Instruction Manual 

Genie Series II Wall Console Installation Instructions

TOOLS REQUIRED

 

OPTIONAL TOOLS REQUIRED

OPERATION AND FEATURES.

Wall console has 3 buttons and 1 indicator backlight.

Backlight

Indicator backlight will display red when wall console is properly wired and Sure-Lock™ is OFF. When SureLock™ is ON, indicator backlight will be OFF.

Open/Close Button

This button opens and closes garage door. When Sure-Lock™ is ON, the Open/Close button will CLOSE door only.

NOTE: Constant button pressure in the CLOSE mode will override STB error responses in the powerhead and close door.

Independent Light Console Button

Use this button to turn powerhead lights ON. Powerhead lighting will remain ON until this button is pressed again or a door action has been completed.

Note: If opener has a Motion Detector, the sensor will keep the powerhead lights ON as long as motion is detected.

Sure-Lock™ Switch

When Sure-Lock™ is ON and the garage door is in the fully closed position, the powerhead cannot be activated by the wall console or a remote. Note: If Sure-Lock™ is activated while the garage door is not fully closed, the door can still be operated until the door is in the fully closed position.

• Slide the Sure-Lock™ Switch up to activate it. The backlight will be OFF.

• Slide the Switch down to turn Sure-Lock™ OFF. The backlight will be ON.

Wall Console Replacement Using Previously Installed Wiring

Need to install new wire? Wire (P/N 35265A.S), can be purchased

INSTALLING REPLACEMENT WALL CONSOLE

• Disconnect power to powerhead.

• Remove existing wall console from the wall by removing mounting screws.• Remove wires from existing wall console.

• Split and strip ends of wire if required (Fig. 2).

• Fasten wire to control board screws on back of wall console (Fig. 3):

 

• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 & 7).

• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 & 7).

NOTE: When existing wires have a color code different from above (FIG. 3), or none at all—make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.

• Mount wall console to wall using screws provided. Verify height at least 5 ft. above floor (Fig. 4).

Reconnect power to powerhead.

• Check operation of each wall console button and feature.

 

Wall Console Replacement Using New Wiring

NOTE: IF MOUNTING CONSOLE IN A NEW LOCATION THAT LOCATION MUST MEET THE FOLLOWING CRITERIA:

• within sight of garage door,

• at least 5 ft. above floor (out of small children’s reach) and,

• away from all moving parts of the garage door.

DISCONNECT POWER TO POWERHEAD.

• Remove existing wall console from the wall by removing mounting screws.

• Split and strip ends of wire (Fig. 2).

• Fasten wires to control board screws on back of wall console (Fig. 3).

• Remount wall console.

• Route wire from wall console to powerhead.

• As you run wire, securely fasten wires to ceiling and wall using insulated staples (Fig. 5). Not provided. Staples should be snug only.

• Route wire through wire guide as shown in Fig. 6 to the terminals.

• Split and strip ends of wire (Fig. 2).

• Connect white wire between powerhead terminal #3 to wall console terminal “W.” (Fig 3 & 7).

• Connect striped wire between powerhead terminal #4 to wall console terminal “B.” (Fig 3 & 7).

• While pressing in locking tab, insert wire into terminal hole and then release locking tab. Confirm secure connection with a gentle tug. (Fig. 7).

 

NOTE: Make sure the wires are connected between terminals as directed above. When the wires are connected to the opposite terminals, the Sure-Lock® and Light feature may not function. The first indication of incorrect wiring is the backlight will be OFF.

NOTE: FOR CONNECTION TO MODELS NOT SHOWN— SEE YOUR OWNERS MANUAL.

RECONNECT POWER TO POWERHEAD.

• Check operation of each button and feature.

Replacement Wall Console  Recommendation
Model Number: GBWCSL2-BX
Part Number: 39165R
Description: Series II Wall Console 
If you have any of the below wall consoles, a replacement
wall console can be GBWCSL2-BX.
GBWC2-BX GPWC-BX GWC-2
Part 38066R Part 37351R Part 35661R
GWC-BX
Part 29599S.S
  • Shipping Truck

    Free Shipping

    We offer FREE shipping and handling on all orders that total over $17.99 and are shipped to a US address. All orders are shipped using UPS ground, directly from The Genie Company.

  • Genuine Genie Accessories and Parts

    Genuine Replacements

    Buying GENUINE Genie accessories and parts guarantees that you are getting quality OEM materials backed by a Genie warranty.

  • Customer support chat

    Support

    Need assistance? We are here for you! We offer a wide range of customer support options including contact by phone or email, web chat services with a live agent, and a robust support section also located on our website.  All customer care teams and services are based in the USA.

FREE SHIPPING ON ALL US ORDERS 17.99 AND UP