Free Shipping On All U.S. Orders $14.99 +
{"id":10492070595,"title":"Screw Drive Carriage Assembly with Magnet- 36179R.S","handle":"screw-drive-carriage-assembly-with-magnet","description":"The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage.\n\u003cul\u003e\n\u003cli\u003eWorks with magnetic or mechanical style limit switches \u003c\/li\u003e\n\u003cli\u003eLever for emergency release cord to attach to keeps you safe in case of a power outage or other emergency to release the door quickly \u003c\/li\u003e\n\u003cli\u003eThe carriage is designed to protect the screw drive from wear and tear\u003c\/li\u003e\n\u003cli\u003eGenuine Genie replacement part \u003c\/li\u003e\n\u003cli\u003eThe carriage is often referred to as a Genie trolley\u003c\/li\u003e\n\u003cli\u003eEasy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly \u003ca href=\"https:\/\/store.geniecompany.com\/blogs\/genie-blog\/how-to-replace-the-genie-legacy-screw-drive-carriage-assembly\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(check out the blog article with instructions and video here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for previous\/ discontinued carriage parts numbers- 34107R, 34107R.S, 20414R, 25589R, 25589S\u003c\/li\u003e\n\u003cli\u003eThis same screw drive carriage was used in many older model Genie garage door openers over the years. See the list below. \u003c\/li\u003e\n\u003cli\u003eCompatible with Models:  1060, 1560, 2560, 3560, 3860, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, CM7500, CM7600, CM8600, PRO95, CM8600-FN, H4000, H6000, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, 2060L, 3060L, IMS1000, ISL950, ISL950\/B, ISL980, ISL980\/B,  G4050CL, G5000CL, G5050CL, G5500CL, G5700CL, G8000CL, GX9000CL, GXL9500CL, GXL9550CL, GXL9900CL, GXL1000CL,Excelerator, H8000-07, H8000D, ISD990, ISD995, ISD1000, PRO99-2IC, PRO99FN, CMD9900, 4560, 4060L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003eTo replace the 36179R.S Genie Screw Drive Carriage follow these steps:\u003c\/p\u003e\n\u003cp\u003e1- With the garage door in the closed position, disengage the screw drive carriage by pulling the red emergency release cord.  After pulling the release cord, slide the old worn out carriage to about 6 inches from the door end of the rail. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_for_Genie_Screw_Drive_Garage_Door_Opener_large.png?v=1565375527\" alt=\"Genie screw drive carriage replacement 36179R.S\"\u003e\u003c\/p\u003e\n\u003cp\u003e2-  \u003cspan\u003ePull the clevis and cotter pin, from the garage door arm that is attached to the old screw drive carriage.  Hold the garage door arm and do not let it fall against the garage door. Once the clevis pin and cotter pin are both removed, slowly slide the door arm down toward the garage door. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_removing_the_door_arm_for_replacement_large.png?v=1565375567\" alt=\"Replacing the 36179R.S screw drive carriage, removing the clevis and cotter pin \"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3-  Slide the screw drive carriage down closer to the garage door (until it is about 2 inches from the end of the rail).  Then remove the nut and bolt from the header bracket that is above the garage door.  Hold onto the rail while doing so. (You may want to use a ladder to rest the garage door opener rail on), or have a second person helping you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4- Slightly lift up on the screw drive rail, slide the old carriage out of the rail.  Then slide the new 36179R.S screw drive carriage back on the rail. Reattach the rail to the header bracket above the garage door with the nut and bolt.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5- Reattach the garage door arm to the screw drive carriage and reconnect the door arm with the clevis and cotter pin that was removed.  After reattaching, re-engage the new screw drive carriage assembly by pulling the red emergency release cord towards the powerhead of the garage door opener. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179RS_large.png?v=1565375792\" alt=\"36179R.S Genie Screw Drive Garage Door Opener Carriage Replacement\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2017-06-26T15:24:44-04:00","created_at":"2017-06-07T14:52:01-04:00","vendor":"The Genie Company","type":"Service Parts","tags":["Carriage"],"price":1999,"price_min":1999,"price_max":1999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40522208963,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"36179R.S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Screw Drive Carriage Assembly with Magnet- 36179R.S","public_title":null,"options":["Default Title"],"price":1999,"weight":136,"compare_at_price":null,"inventory_quantity":958,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage-_t_001.jpg?v=1540410071","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage-_f.jpg?v=1540410071","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage_s_HR.jpg?v=1540410071"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36179r-s-carriage-_t_001.jpg?v=1540410071","options":["Title"],"content":"The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage.\n\u003cul\u003e\n\u003cli\u003eWorks with magnetic or mechanical style limit switches \u003c\/li\u003e\n\u003cli\u003eLever for emergency release cord to attach to keeps you safe in case of a power outage or other emergency to release the door quickly \u003c\/li\u003e\n\u003cli\u003eThe carriage is designed to protect the screw drive from wear and tear\u003c\/li\u003e\n\u003cli\u003eGenuine Genie replacement part \u003c\/li\u003e\n\u003cli\u003eThe carriage is often referred to as a Genie trolley\u003c\/li\u003e\n\u003cli\u003eEasy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly \u003ca href=\"https:\/\/store.geniecompany.com\/blogs\/genie-blog\/how-to-replace-the-genie-legacy-screw-drive-carriage-assembly\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(check out the blog article with instructions and video here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for previous\/ discontinued carriage parts numbers- 34107R, 34107R.S, 20414R, 25589R, 25589S\u003c\/li\u003e\n\u003cli\u003eThis same screw drive carriage was used in many older model Genie garage door openers over the years. See the list below. \u003c\/li\u003e\n\u003cli\u003eCompatible with Models:  1060, 1560, 2560, 3560, 3860, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, CM7500, CM7600, CM8600, PRO95, CM8600-FN, H4000, H6000, IS525, IS525\/B, IS550, IS550\/B, IS850, IS900, IS900\/B, IS920, 2060L, 3060L, IMS1000, ISL950, ISL950\/B, ISL980, ISL980\/B,  G4050CL, G5000CL, G5050CL, G5500CL, G5700CL, G8000CL, GX9000CL, GXL9500CL, GXL9550CL, GXL9900CL, GXL1000CL,Excelerator, H8000-07, H8000D, ISD990, ISD995, ISD1000, PRO99-2IC, PRO99FN, CMD9900, 4560, 4060L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003eTo replace the 36179R.S Genie Screw Drive Carriage follow these steps:\u003c\/p\u003e\n\u003cp\u003e1- With the garage door in the closed position, disengage the screw drive carriage by pulling the red emergency release cord.  After pulling the release cord, slide the old worn out carriage to about 6 inches from the door end of the rail. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_for_Genie_Screw_Drive_Garage_Door_Opener_large.png?v=1565375527\" alt=\"Genie screw drive carriage replacement 36179R.S\"\u003e\u003c\/p\u003e\n\u003cp\u003e2-  \u003cspan\u003ePull the clevis and cotter pin, from the garage door arm that is attached to the old screw drive carriage.  Hold the garage door arm and do not let it fall against the garage door. Once the clevis pin and cotter pin are both removed, slowly slide the door arm down toward the garage door. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179R.S_Carriage_removing_the_door_arm_for_replacement_large.png?v=1565375567\" alt=\"Replacing the 36179R.S screw drive carriage, removing the clevis and cotter pin \"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3-  Slide the screw drive carriage down closer to the garage door (until it is about 2 inches from the end of the rail).  Then remove the nut and bolt from the header bracket that is above the garage door.  Hold onto the rail while doing so. (You may want to use a ladder to rest the garage door opener rail on), or have a second person helping you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4- Slightly lift up on the screw drive rail, slide the old carriage out of the rail.  Then slide the new 36179R.S screw drive carriage back on the rail. Reattach the rail to the header bracket above the garage door with the nut and bolt.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5- Reattach the garage door arm to the screw drive carriage and reconnect the door arm with the clevis and cotter pin that was removed.  After reattaching, re-engage the new screw drive carriage assembly by pulling the red emergency release cord towards the powerhead of the garage door opener. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/36179RS_large.png?v=1565375792\" alt=\"36179R.S Genie Screw Drive Garage Door Opener Carriage Replacement\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}

Screw Drive Carriage Assembly with Magnet- 36179R.S

Product Description
$19.99
Maximum quantity available reached.
The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage.
  • Works with magnetic or mechanical style limit switches 
  • Lever for emergency release cord to attach to keeps you safe in case of a power outage or other emergency to release the door quickly 
  • The carriage is designed to protect the screw drive from wear and tear
  • Genuine Genie replacement part 
  • The carriage is often referred to as a Genie trolley
  • Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly (check out the blog article with instructions and video here)
  • Direct replacement for previous/ discontinued carriage parts numbers- 34107R, 34107R.S, 20414R, 25589R, 25589S
  • This same screw drive carriage was used in many older model Genie garage door openers over the years. See the list below. 
  • Compatible with Models:  1060, 1560, 2560, 3560, 3860, IS525, IS525/B, IS550, IS550/B, IS850, IS900, IS900/B, IS920, CM7500, CM7600, CM8600, PRO95, CM8600-FN, H4000, H6000, IS525, IS525/B, IS550, IS550/B, IS850, IS900, IS900/B, IS920, 2060L, 3060L, IMS1000, ISL950, ISL950/B, ISL980, ISL980/B,  G4050CL, G5000CL, G5050CL, G5500CL, G5700CL, G8000CL, GX9000CL, GXL9500CL, GXL9550CL, GXL9900CL, GXL1000CL,Excelerator, H8000-07, H8000D, ISD990, ISD995, ISD1000, PRO99-2IC, PRO99FN, CMD9900, 4560, 4060L
Sku: 36179R.S

To replace the 36179R.S Genie Screw Drive Carriage follow these steps:

1- With the garage door in the closed position, disengage the screw drive carriage by pulling the red emergency release cord.  After pulling the release cord, slide the old worn out carriage to about 6 inches from the door end of the rail. 

Genie screw drive carriage replacement 36179R.S

2-  Pull the clevis and cotter pin, from the garage door arm that is attached to the old screw drive carriage.  Hold the garage door arm and do not let it fall against the garage door. Once the clevis pin and cotter pin are both removed, slowly slide the door arm down toward the garage door. 

Replacing the 36179R.S screw drive carriage, removing the clevis and cotter pin

3-  Slide the screw drive carriage down closer to the garage door (until it is about 2 inches from the end of the rail).  Then remove the nut and bolt from the header bracket that is above the garage door.  Hold onto the rail while doing so. (You may want to use a ladder to rest the garage door opener rail on), or have a second person helping you.

4- Slightly lift up on the screw drive rail, slide the old carriage out of the rail.  Then slide the new 36179R.S screw drive carriage back on the rail. Reattach the rail to the header bracket above the garage door with the nut and bolt.

5- Reattach the garage door arm to the screw drive carriage and reconnect the door arm with the clevis and cotter pin that was removed.  After reattaching, re-engage the new screw drive carriage assembly by pulling the red emergency release cord towards the powerhead of the garage door opener. 

36179R.S Genie Screw Drive Garage Door Opener Carriage Replacement

 

Questions & Answers

Ask a Question
  • Does this part work with the Model H4000A also?

    Yes, this will work with the H4000A. 

  • Does this carriage work with model #H8000D

    Yes, the 36179R.S carriage will work with the H8000D model.

  • Will this fit my is550/a model

    Yes. This Carriage will fit the IS550/A model. 

  • does this part work with model H6000-07

    Yes it does. 

  • I have a H6000A, but this looks almost exactly like my carriage. will it work with my unit?

    Yes this will work on the H6000A. 

  • Does this part work with an IMS1000/A?

    Yes it does! 

  • will this carriage work on a model H4000-07/M ?

    Yes it will! 

  • Will this replace the 34107R carriage part number?

    Yes! This will replace the old carriage part number 34107R.

  • Will this work with the 3060L model?

    Yes, it will! 

  • Will this work on a ISL950/A?

    Yes, it will! 

  • This item will work with model H6000-07

    Yes, it will. 

  • Will this assembly work on my model sd 5050?

    Yes, it will. 

  • will this fit the medallion series GLX 10000

    Yes, it will. 

  • I need the carriage that fits my genie intel—1/2 H.P. model 1000/A genie garage door opener Receiver model ACSR3G. What part should I get? Please advise.

    Yes, this 36179R.S is the correct one. 

  • will genie screw drive carriage assembly with magnet 36179R.s work on genie model#1S550-A?

    Yes, it will! 

  • Does it work with MODEL #IS900/A ?

    Yes, it does. 

  • Does this part work with model 2060i-07?

    Yes, it does. 

  • Will this work for a SD9000

    Yes, it will!

  • Does this work with GX9000 1/2 HP screw drive model?

    Yes, it does. 

  • Will this fit my ISL90/A model

    Yes, it will. 

  • is this the correct screw drive carriage for model CM 8500-S 1/2 H.P. Genie Blue Max?

    Yes, it is.

  • Does this part work for the CM8600IC/A model?

    Yes, it will!

  • Will this fit model # acsr3g?

    The ACSR3G is a receiver number. To verify your model number, please contact Genie customer service at 1-800-354-3643. We can help determine which garage door opener you have and if it is compatible.

  • Will this work with imperial 10007 model

    No, it will not.

  • Need an Up limit switch for Genie Blue MAx CM8500. Do you have it

    You will need the limit switch part number 20113R.S for the Blue Max CM8500.

  • Will this carriage work with Power Lift model number 2562?

    No, it will not. You would need the carriage assembly part number 37845R.S.

  • does this part work with model 1022?

    No, it does not. The carriage for the 1022 is part number 36453A.S.

  • Does this work with ISL950/A?

    Yes, it does!

  • Does this part work with Model PMX500ic/B

    No, it will not. Please see our breakdown for the PMX500IC/B model here, and determine by which rail you have. You can also contact our customer service at 1-800-354-3643 for assistance.

  • How to adjust the light that comes on when the door is raised or lowered. The light on my opener won't go out. The model is CM7600IC with mechanical limited switches?

    Hi! The constant light could be caused by a few different things. In order to eliminate these, here are a few steps to try. First, you would want to remove the wall button from the wall. Then take the two wires off the back of it and leave them off. You would then want to run the unit with a remote, then wait at least five minutes and the light should time out. If they do go out, you would want to replace the wall console (with a series II 39165R).  If they do not, then you would want to remove the wall button wires from the power head. Again, run the unit with a remote, wait the five minutes and see if they go out. If they do, you would want to replace the wall button wire from the wall button to the power head. (This is 18 to 22 gauge doorbell wire 35265A.S) If they do not go out after both of these then the circuit board would need to be replaced in the unit. For the CM7600IC, this would be the Sequencer Board (20386R.S) that has the relay for the lights. 

    As always, if you need assistance with this troubleshooting, or have any questions, you can contact our Genie customer service at 1-800-354-3643. 

  • Will this work on model ISD 990

    Yes, it will!

  • Is this part (Screw Drive Carriage Assembly with Magnet- 36179R.S) compatible with a PRO 88 model ? Thanks for your answer.

    Yes, it is!

  • Does the Screw Drive Carriage 3617R.S work for model# CM8500=S?

    Yes, it does.

  • what is the warranty on this part?

    When buying a part or accessory the warranty would be one year.

  • Will this work with model G5500

    Yes, it will.

  • Will this work with genie model ISL950/A

    Yes, it will!

  • Does the carriage work with a model: IS900A?

    Yes, it does.

  • Will this work with my powerlifting 900

    No, it will not. The PowerLift 900 would use the 37845R.S Screw Drive Carriage Assembly.

  • Will this work with 4062?

    No, the 4062 uses the 37845R.S Screw Drive Carriage Assembly.

  • Will this work with a 1/3 hp model cm7500-s?

    Yes, it will.

  • Does this part work with the Model SD5050 also?

    Yes, it does.

  • Does this work with Power lift model 2562?

    No, it will not. The screw drive carriage assembly for the 2562 model is part 37845R.S.

  • will this part work with intellicode ISL950/A

    Yes, it will!

  • This part will work with H4000-07/M ?

    Yes, it will!

  • I have SD9005. Does this screw drive Carriage work for this model number?

    Yes, it does.

  • Does this work for model IS550/A?

    Yes, it does!

  • Will this work for SD9500

    Yes, it will.

  • Does this part work with the Model GXL 9500?

    Yes, it does!

  • Does this part work for Model 2060L-07 model? Looks the same but couldn’t find this model on the website list. If not can you give me a SKU for same part for Model 2060L-07? Thanks

    Yes, this carriage will work with the 2060L-07 model.