Capacitor, 70MFD - 19988A.S

Does IntelliG Pro Series Model 3024 have a capacitor?

No, the Genie model 3024 does not have a capacitor.  If you provide the symptoms that your unit is having we would be happy to assist with your issue.

IMG garage door was going up and I heard a crack and the door was jammed open to the motor and starting to smoke. It still works but sometimes stops half way up when opening. The capacitator has oil on it. Is the capacitator bad?

Yes, typically a pop and smoking is indicative of a bad capacitor.  Sometimes the capacitor will reseal itself which can cause it to continue to work, but it should be replaced.

I have the CM8600IC/A … will this capacitor work ?

Yes, the Capacitor, 70MFD - 19988A.S is compatible with Genie model CM8600IC/A.

Is this compatible with the CM 7500-S?

Yes, the Capacitor, 70MFD - 19988A.S is compatible with Genie model CM7500-S.

What are the capacitor tolerances? 70 mfd +/-??

The capacitor has a tolerance of +/- 5-10%.

How long should the garage door opener be disconnected from power before replacing the capacitor?

We recommend waiting a minimum of 30 minutes prior to attempting replacement of the capacitor.

I have a H4000A and the capacitor that went bad was 19988A and it was 4.5 inches long. I replaced the capacitor with another 19988A that was 3.25 inches long and it blew after only a few uses. So now I am confused on what capacitor to use. I’d like to replace it with one that is the same size.

The size of the capacitor has changed.  Typically when the capacitor blows multiple times the motor would be experiencing friction issues causing the capacitor failure.  In this case we would recommend the replacement of the unit.

I have the IS550-A and the spring is good and there are no restrictions to the door or screw drive. It is cold here but the door will only travel a few inches and stops. It does this either up or down. The door opens and closes by hand easily. Do yo think a new motor is in order vice a capacitor?

If the units starts and then stops, this would not be a capacitor issue.  Could be a motor, but you would want to make sure to try and turn up your open and close forces to see if the problem is resolved.  If not the complete unit would need replaced as we no longer have motors for this unit.

Thank you.

Is this the correct capacitor for a genie CM7600IC/A?

Yes, the Capacitor, 70MFD - 19988A.S  is compatible with model CM7600IC/A.

Is this compatible with IS550/A?

Yes, Capacitor part number 19988A.S is compatible with model IS550/A.

Is this compatible with PMX500Ic/b

Yes it is.

is this compatible with model ISL950/A?

Yes, the 19998A.S capacitor is compatible with the ISL950/A.

Does this work for IMS 1000/A ? if not would you provide the correct one ?

The 19988A.S is the correct capacitor for the IMS1000/A.

Is this compatible with the 3060L?

Yes, it is.

There are two different capacitor lengths (3 5/16in and 4 5/16in), how do I know if what I am ordering is the right length as the length is not listed?

What model is your garage door opener?

Is this compatible with Model# ISD995?

Yes, it is.

Is this capacitor compatible with Model #CM76001C/A?

Yes, it is!

Does this work with the cm7600ic/A

Yes, it does.

Do you happen to know the length of this capacitor? I'm replacing one marked "X-19988-A" on my old Genie model SD9000, which is 4-1/4" long, and I have a hunch that other 19988-A capacitors are about 3-3/8" long.

The current 19988A.S capacitor is 3 1/4" long, this is the correct one for the SD9000.

I have a model H4000-07/M 120v. 60hz 6amp for 1/2 H.P Whats the correct capacitor for this model I bought an afyermarket from Seaknight made in china....it got hot and exploded afyer the 5th try.

The 19988A.S capacitor is the correct one for the Genie H4000-07/M model garage door opener.

Hello is this compatible with model H6000 - 07 1/2H.p. Thanks.

Yes, it is!

is this compatible with 1/3 hp model CM-7500-S?

Yes, it is.

For the Capacitor, 70MFD - 19988A.S Have any warranty for this model? Thank you.

There is a one year warranty on all of our replacement parts and accessories we sell.

Is it compatible with genie capacitor x-19988-a 70 mfd 3629147?

Yes, it is.

Is this compatible with the GCG350ml

No, the GCG350ML uses the 50MFD capacitor, part number 18004B.S.

Does this fit model is900/a

Yes, it does.

My model is is900A. This capacitor says it fits is900, and is900b. Will it work on mine? Thanks

Yes, it will.

Capacitor replacement for my Genie promax PMX500IC/B. Is a 19988-A compatible with this model? Thanks

Yes, it is!

From what I read if the box smoked & now it just hums when I plug it in, I need to get a new capacitor, correct? Need to know if this is the right capacitor for Mod# H4000A. Also need the part # for the bent arm piece for same Mod#.

This is the correct capacitor. For the door arm you would need the 26013D.S.

if i order the capacitor X-19988-A 70 mfd today, when will the part to my home?

Orders placed today, depending on what time they are placed, will ship within 1 to 2 business days. (Can ship the same day, again this would depend on what time it is placed.). We ship UPS ground from Ohio. So the delivery time frame will depend on which state you are in.

Is this compatible with the 1/2 HP Screw drive SD9000??

No, it is not.

My model is Genie im looking for capacitor marked X-19988-A 70MFD 3629730 220VAC 50/60HZ Will the 19988-A.S work in my opener?

Yes, the 19988A.S would be correct.

is this a 120 volt will it work with my half HP. model cm86001c/a

Yes, this capacitor will work with the CM8600IC/A model garage door opener.

My model is a GENIE 1/2 HP SD9000. The existing Capacitor in the opener is marked 75-84 MFD 220 VAC 60HZ 3629014. My Owners Manual shows the capacitor as PART NUMBER 19988A Will the Capacitor 70MFD - 19988A.S work in my opener? I did not find my model number SD9000 in the list.

Yes, it will.

My model is a 1/2 H.P. MODEL CM8600-XL/M. Is it the correct one?

Yes, this is the correct one for the CM8600-XL/M.

Is this compatible with the 2060L-07

Yes, it is.

is this compatible with model H6000-07?

Yes, it is!

Is this compatible with CM7600IC/A

Yes, it is.

Is this compatible with model H400OA

Yes, it is.

Above it says compatible with H6000. My unit is an H6000A, does that make a difference?

There is no difference, this will work.

I have an old Genie opener and the capacitor is marked 18004 A. Is the replacement for this the 18004B or the 19988A?

It would be the 18004B.S. 

Qis this compatible with model IS 550/A?

Yes, it is. 

is this compatible with model IS 550-1

Yes, it is! 

Is this compatible with model 3060

Yes, it is. 

My model is a cm8600ic/a And the model is not listed for the 70 micro farad capacitor so is it the correct one or is it different Thanks

Yes, this is the correct one. 

Is this compatible with is900/a

Yes it is.

What is the capacitor for model ISL950/A?

The Capacitor, 70MFD - 19988A.S is the correct capacitor for a Genie model ISL950/A.

What is the capacitor for model ISL950/A

The Capacitor, 70MFD - 19988A.S is the correct capacitor for a Genie model ISL950/A.

Need to replace EPCOS motor start capacitor X-19988-A. Can’t find EPCOS brand, which brand do you suggest?

The capacitor you need is Capacitor, 70MFD - 19988A.S.

Will this capacitor fit my older model 2060/3060

Yes, the Capacitor, 70MFD - 19988A.S is compatible with Genie models 2060 and 3060.

Is this capacitor compatible for a model 2020 L ???

This is the incorrect capacitor for your opener. You would need the 18004B.S capacitor.

What starter capacitor is compatible with Model IS550a?

Capacitor, 70MFD - 19988A.S is the correct capacitor for your Genie model IS550A garage door opener.

Is this capacitor also compatible with the Genie 1/2 horsepower Model H6000A door opener motor?

Yes, the Capacitor, 70MFD - 19988A.S is the correct capactior for your Genie model H6000A garage door opener.

I have a model CM76001CA which has a Shonge cbb60 capacitor, which appears to be intermittent. Sometimes the opener buzzes, sometimes works. which is the better replacement: 19988A.S, or 18004B.S

You would need the Capacitor, 70MFD - 19988A.S for your Genie model CM7600IC/A garage door opener.

What capacitor is need for a is900a genie intellicode

Yes, the Capacitor, 70MFD - 19988A.S is the correct capacitor.

will this work in model IS550/a?

Yes, the Capacitor, 70MFD - 19988A.S is compatible with the Genie model IS550/A.

I have a 1/2 H.P Model H4000-07 model. Will this capacitor work with this model? Or can you provide me the model that I can switch out my entire unit with? I believe this model is about 18 years old.

Yes, the Capacitor, 70MFD - 19988A.S is compatible with the Genie model H4000-07.

Does the 70 mfd fit model g5000 1/2 hp

Yes, the 19988A.S capacitor will work with your Genie model G5000 garage door opener.

Is this the correct capacitor for model CM8600IC/A

Yes, the Capacitor, 70MFD - 19988A.S is compatible with Genie model CM8600IC/A.

my genie model is h4000a and its' capacitor is colored white, # x19988a . . . is this the right capacitor for it? is there a warranty?

Yes, the Capacitor, 70MFD - 19988A.S is the correct capacitor for your Genie model H4000A.  No, there is no warranty.