I have a H4000A and the capacitor that went bad was 19988A and it was 4.5 inches long. I replaced the capacitor with another 19988A that was 3.25 inches long and it blew after only a few uses. So now I am confused on what capacitor to use. I’d like to replace it with one that is the same size.
The size of the capacitor has changed. Typically when the capacitor blows multiple times the motor would be experiencing friction issues causing the capacitor failure. In this case we would recommend the replacement of the unit.
I have the IS550-A and the spring is good and there are no restrictions to the door or screw drive. It is cold here but the door will only travel a few inches and stops. It does this either up or down. The door opens and closes by hand easily. Do yo think a new motor is in order vice a capacitor?
If the units starts and then stops, this would not be a capacitor issue. Could be a motor, but you would want to make sure to try and turn up your open and close forces to see if the problem is resolved. If not the complete unit would need replaced as we no longer have motors for this unit.
Thank you.
Is this the correct capacitor for a genie CM7600IC/A?
Yes, the Capacitor, 70MFD - 19988A.S is compatible with model CM7600IC/A.
Is this compatible with IS550/A?
Yes, Capacitor part number 19988A.S is compatible with model IS550/A.
Is this compatible with PMX500Ic/b
Yes it is.
is this compatible with model ISL950/A?
Yes, the 19998A.S capacitor is compatible with the ISL950/A.
Does this work for IMS 1000/A ? if not would you provide the correct one ?
The 19988A.S is the correct capacitor for the IMS1000/A.
Is this compatible with the 3060L?
Yes, it is.
There are two different capacitor lengths (3 5/16in and 4 5/16in), how do I know if what I am ordering is the right length as the length is not listed?
What model is your garage door opener?
Is this compatible with Model# ISD995?
Yes, it is.
Is this capacitor compatible with Model #CM76001C/A?
Yes, it is!
Does this work with the cm7600ic/A
Yes, it does.
Do you happen to know the length of this capacitor? I'm replacing one marked "X-19988-A" on my old Genie model SD9000, which is 4-1/4" long, and I have a hunch that other 19988-A capacitors are about 3-3/8" long.
The current 19988A.S capacitor is 3 1/4" long, this is the correct one for the SD9000.
I have a model H4000-07/M 120v. 60hz 6amp for 1/2 H.P Whats the correct capacitor for this model I bought an afyermarket from Seaknight made in china....it got hot and exploded afyer the 5th try.
The 19988A.S capacitor is the correct one for the Genie H4000-07/M model garage door opener.
Hello is this compatible with model H6000 - 07 1/2H.p. Thanks.
Yes, it is!
is this compatible with 1/3 hp model CM-7500-S?
Yes, it is.
For the Capacitor, 70MFD - 19988A.S Have any warranty for this model? Thank you.
There is a one year warranty on all of our replacement parts and accessories we sell.
Is it compatible with genie capacitor x-19988-a 70 mfd 3629147?
Yes, it is.
Is this compatible with the GCG350ml
No, the GCG350ML uses the 50MFD capacitor, part number 18004B.S.
Does this fit model is900/a
Yes, it does.
My model is is900A. This capacitor says it fits is900, and is900b. Will it work on mine? Thanks
Yes, it will.
Capacitor replacement for my Genie promax PMX500IC/B. Is a 19988-A compatible with this model? Thanks
Yes, it is!
From what I read if the box smoked & now it just hums when I plug it in, I need to get a new capacitor, correct? Need to know if this is the right capacitor for Mod# H4000A. Also need the part # for the bent arm piece for same Mod#.
This is the correct capacitor. For the door arm you would need the 26013D.S.
if i order the capacitor X-19988-A 70 mfd today, when will the part to my home?
Orders placed today, depending on what time they are placed, will ship within 1 to 2 business days. (Can ship the same day, again this would depend on what time it is placed.). We ship UPS ground from Ohio. So the delivery time frame will depend on which state you are in.
Is this compatible with the 1/2 HP Screw drive SD9000??
No, it is not.
My model is Genie im looking for capacitor marked X-19988-A 70MFD 3629730 220VAC 50/60HZ Will the 19988-A.S work in my opener?
Yes, the 19988A.S would be correct.
is this a 120 volt will it work with my half HP. model cm86001c/a
Yes, this capacitor will work with the CM8600IC/A model garage door opener.
My model is a GENIE 1/2 HP SD9000. The existing Capacitor in the opener is marked 75-84 MFD 220 VAC 60HZ 3629014. My Owners Manual shows the capacitor as PART NUMBER 19988A Will the Capacitor 70MFD - 19988A.S work in my opener? I did not find my model number SD9000 in the list.
Yes, it will.
My model is a 1/2 H.P. MODEL CM8600-XL/M. Is it the correct one?
Yes, this is the correct one for the CM8600-XL/M.
Is this compatible with the 2060L-07
Yes, it is.
is this compatible with model H6000-07?
Yes, it is!
Is this compatible with CM7600IC/A
Yes, it is.
Is this compatible with model H400OA
Yes, it is.
Above it says compatible with H6000. My unit is an H6000A, does that make a difference?
There is no difference, this will work.
I have an old Genie opener and the capacitor is marked 18004 A. Is the replacement for this the 18004B or the 19988A?
It would be the 18004B.S.
Qis this compatible with model IS 550/A?
Yes, it is.
is this compatible with model IS 550-1
Yes, it is!
Is this compatible with model 3060
Yes, it is.
My model is a cm8600ic/a And the model is not listed for the 70 micro farad capacitor so is it the correct one or is it different Thanks
Yes, this is the correct one.