Free Shipping On All U.S. Orders $14.99 +
{"id":10801869955,"title":"Universal Garage Door Opener Remote Upgrade \/ Conversion Kit","handle":"universal-garage-door-opener-remote-upgrade-conversion-kit","description":"\u003cp\u003eThe Genie Universal Dual Frequency Remote Conversion Kit is used to upgrade nearly any model garage door opener to use modern (secure) remotes. This GIRUD-1T comes with one garage door opener 3-button remote and works with all of our current or previous style Genie Intellicode remotes. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUniversal- works with nearly all model garage door openers that have required safety beams installed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eActs as a replacement receiver for older model garage door openers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncludes one 3-button remote, one receiver, one transformer, electrical wire (two-wire), and instructions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThe kit alleviates interference issues with Radio Frequency interference by offering\u003cspan\u003e dual frequency to alleviate issues from the land mobile radio communication system used by military bases as part of the homeland security efforts\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntellicode access security system provides state-of-the-art security for your home by automatically changing the opener's access code every time the remote operates; helps prevent unauthorized entry\u003c\/li\u003e\n\u003cli\u003eEach button on the 3-Button remote can be programmed to other Genie Intellicode model garage door openers\/ Intellicode receivers (use the one remote on up to three separate operators)\u003c\/li\u003e\n\u003cli\u003eModel GIRUD-1T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Universal_Dual_Frequency_Conversion_Kit.pdf?4144\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Instructions for the GIRUD-1T Universal Radio Reciever Conversion Kit \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Radio Receiver Conversion Kit with Programming Instructions for use with all brands of garage door openers \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomer Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy purchasing a \u003cspan\u003eUniversal Radio \u003c\/span\u003e\u003cspan\u003eReceiver Conversion Kit with\u003c\/span\u003e Rolling Code system, you can be confident that you’re equipping your garage door opener with the best possible defense against the threat of code grabbers.\u003c\/p\u003e\n\u003cp\u003eWe’ve broken the installation process into easy-to-follow steps. If at any time during the installation process you have questions, please call the Customer Service department at 1-800-354-3643.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_tools_needed_large.png?v=1558715366\" alt=\"GIRUD-1T Parts Identification and tools for installation \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGetting Started FIGURE 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Installation\u003c\/strong\u003e\u003cbr\u003eThe installation process for your Universal Radio Receiver Conversion Kit will vary slightly depending upon your opener’s radio system.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eWARNING \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe power cord must be unplugged before attaching any wires. Be sure wire ends do not touch each other or other terminals. If your opener is equipped with a Wireless Keypad or you use other access devices such as a mini-remote control, the batteries must be removed from these devices as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_1_large.png?v=1558715250\" alt=\"GIRUD-1T Figure 1 installation instructions \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Unplug, or open the breaker that supplies power to the garage door opener.\u003cbr\u003eWHICH DO YOU HAVE, AN INTERNAL OR EXTERNAL RADIO?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e For openers with internal radios.\u003cbr\u003e• REMOVE batteries from all old remote controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e For openers with external radios.\u003cbr\u003e• Disconnect the existing external radio receiver from the garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting the Universal Receiver FIGURE 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_2_large.png?v=1558715291\" alt=\"GIRUD-1T Figure 2 Installation Instructions \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Position the receiver on the ceiling above and in front of the opener (between the opener and the garage door) so that the receiver is at least 2 feet from the opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Mount Receiver using two pan head screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Do not attach the Receiver to the garage door opener’s mounting hardware. Attaching the Receiver to the mounting bracket or other metal surfaces could cause interference or grounding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Do not remove the circuit board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting Receiver to Door Opener FIGURE 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_3_large.png?v=1558715637\" alt=\"GIRUD-1T Figure 3 Installation Instructions Connecting the receiver \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA \u003c\/strong\u003eCut wire; enough to run from the garage door opener terminal strip to the Receiver.\u003cbr\u003e• The location of the terminal strip varies from model to model. It may be located on the back, front or sides of the opener or underneath the light lens. If you cannot locate the terminal strip, please refer to the Owner’s Manual of your opener or contact the manufacturer of the opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Strip and route wires.\u003cbr\u003e• Remove 1\/2˝ of insulation from the garage door opener end of the wire.\u003cbr\u003e• Remove 1\/4\" of insulation from the Receiver end of the wire.\u003cbr\u003e• Route wire from Receiver to garage door opener terminal strip making sure the wire is clear of all moving parts of the door and door hardware.\u003cbr\u003e• Staple wire in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Drive staples just tight enough to hold the wire. Staples driven too tightly can short circuit the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e Wire the receiver.\u003cbr\u003e• Connect the STRIPED Wire to “WALLBUTTON” terminal on the Receiver.\u003cbr\u003e• Connect the WHITE Wire to “COMMON” terminal on the Receiver. (Do not tighten screw yet. Another wire will be added later).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD\u003c\/strong\u003e Wire the garage door opener.\u003cbr\u003e• Follow existing wires from Wall Button to the terminal strip on the door opener.\u003cbr\u003e• Connect the WHITE Wire to one of the Wall Button terminals.\u003cbr\u003e• Connect the STRIPED Wire to the other Wall Button terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting Receiver to Transformer FIGURE 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCAUTION: Be sure wire ends do not touch each other or other terminals.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA \u003c\/strong\u003eCut wire; enough to run from Receiver to transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Strip and route wires.\u003cbr\u003e• Remove 1\/2˝ of insulation from the transformer end of the wire.\u003cbr\u003e• Remove 1\/4˝ of insulation from the Receiver end of the wire. \u003c\/p\u003e\n\u003cp\u003e• Route wire from Receiver to the transformer, making sure wire is clear of all moving parts of the door and door hardware.\u003c\/p\u003e\n\u003cp\u003e• Staple wire in place.\u003c\/p\u003e\n\u003cp\u003eNOTE: Drive staples just tight enough to hold the wire. Staples driven too tightly can short circuit the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e Wire the Receiver.\u003cbr\u003e• Connect STRIPED Wire to “POWER” terminal.\u003cbr\u003e• Connect WHITE Wire to “COMMON” terminal.\u003cbr\u003e• Now tighten the screw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD\u003c\/strong\u003e Wire the transformer.\u003cbr\u003e• Connect the STRIPED Wire to either terminal.\u003cbr\u003e• Connect the WHITE Wire to the other terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e It does not matter which wire is connected to which terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eE\u003c\/strong\u003e Connect to the power source\u003cbr\u003e• Plug in the garage door opener.\u003cbr\u003e• Plug in the transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour  Universal Radio Reciever Conversion kit system is now ready to program! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgramming the Receiver FIGURE 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_4_large.png?v=1558716165\" alt=\"GIRUD-1T Installation figure 4 Programming the receiver \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: During programming, the Door Opener could begin to run. Stay away from moving Door and its parts. To keep Door from moving, close Door using the wall button and disconnect it from Opener by pulling Emergency Release Cord (see Owner’s Manual).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Locate Learn Code Button and Learn Code Indicator LED on the side of the receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eB\u003c\/strong\u003e Press and release Learn Code Button.\u003cbr\u003e• Indicator LED will blink about 2 times\u003cbr\u003eper second.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e Press transmitter button once within 30 seconds.\u003cbr\u003e• Indicator LED stays on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD\u003c\/strong\u003e Press the same transmitter button again within 30 seconds to set Code.\u003cbr\u003e• Indicator LED turns off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eE\u003c\/strong\u003e Press transmitter button again.\u003cbr\u003e• Door should move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF\u003c\/strong\u003e Press transmitter button again.\u003cbr\u003e• Door should stop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e If you do not perform steps C and D quickly enough, the LED will begin flashing rapidly. Begin programming again at Step B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eIf the Receiver does not respond properly at any time during programming, check the wiring and connections between the Receiver and transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eIf door opener does not respond properly, check wiring and connections between Receiver and Opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eG\u003c\/strong\u003e Repeat Steps 5A through 5G for each Transmitter, Wireless Keypad or other access devices to be learned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 6 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransmitter Function\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eAfter successfully programming the receiver and all transmitters, engage the garage door. (See Owner’s Manual for instructions.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Point Transmitter toward opener and press button.\u003cbr\u003e• Door moves.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eB\u003c\/strong\u003e Press Transmitter button again.\u003cbr\u003e• Door will stop moving.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eC\u003c\/strong\u003e Press Transmitter button again.\u003cbr\u003e• The door will move in the opposite direction. The door will stop automatically at the fully open and fully closed positions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: TEST CONTACT REVERSE SYSTEM of your door opener. See your door opener Owner’s Manual for the procedure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 7 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisabling the Old Radio System FIGURE 5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"GIRUD-1T Figure 5 Installation instructions disabling the old radio system\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_5_large.png?v=1558717168\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR ADDITIONAL SECURITY YOU MUST NOW DISABLE THE OLD RADIO SYSTEM.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA \u003c\/strong\u003eThrow away all old remote controls, wireless keypad, and other access devices.\u003cbr\u003e• Make sure batteries have been removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e For garage door openers with internal radios.\u003cbr\u003e• Cut off antenna.– Most antennas are thin pieces of wire hanging from the opener. Some are thin strips of metal. If you can’t find the antenna, see your Opener’s Owner’s Manual or contact the manufacturer.\u003c\/p\u003e\n\u003cp\u003e• Change code settings.\u003cbr\u003e– Locate the code switches.\u003cbr\u003e– If they are not obvious, check inside the Light Lens.\u003cbr\u003e• Change the combination of up and down switches in the garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e It is essential that you also change the code settings in case someone may have copied your code.\u003c\/p\u003e\n\u003cp\u003eInstead of switches, some garage door openers had a series of numbered holes with a small strand of metal or wire running across the hole called “punch outs.”To change the code you simply break one or two additional punch outs in the garage door opener. Some garage door openers have no code switches or punch outs. If you are unable to locate the settings or cannot change them, refer to your Opener’s Owner’s Manual or contact the manufacturer of your opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e For garage door openers with external radios.\u003cbr\u003e• Remove existing radio receiver.\u003cbr\u003e• Throw away the existing external radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 8 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eErasing Receiver Memory\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: During programming, the Door Opener could begin to run. Stay away from moving Door and its parts. To keep Door from moving, close Door using the wall button and disconnect it from Opener by pulling Emergency Release Cord (see Owner’s Manual).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf a Transmitter becomes lost or stolen or you want to delete a Transmitter, Wireless Keypad or other access devices:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Press and hold Learn Code Button for 10 seconds or until Learn Code Indicator LED goes out.\u003cbr\u003e• All Transmitter Codes are erased from memory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Reprogram Receiver with remaining Transmitters.\u003cbr\u003e• Follow Step 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Step 9 Battery \/ Visor Clip Installation FIGURE 6\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_6_large.png?v=1558719485\" alt=\"GIRUD-1T instructions figure 6 battery- visor clip installation \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Gently pry off back of transmitter case. Take care when opening.\u003cbr\u003e– Use a ballpoint pen, coin or small screwdriver.\u003cbr\u003e• Remove the old battery and install a new battery of the same type in same position.\u003cbr\u003e• Press the halves of the transmitter together until it snaps closed.\u003c\/p\u003e\n\u003cp\u003eNOTE: FCC and IC CERTIFIED\u003cbr\u003eThis device complies with FCC Part 15 and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular situation. If this equipment does cause harmful interference to radio or television reception, which may be determined by turning the equipment OFF and ON, the user is encouraged to try and correct the interference by one or more of the following measures: (a) Re-orient or relocate the receiver antenna, (b) Increase the separation between the opener and receiver, (c) Connect the opener into an outlet on a circuit different from that to which the receiver is connected, and (d) Consult your local dealer. Any modifications or changes to this equipment which are not expressly approved by the manufacturer could void the user's authority to operate the equipment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2017-08-23T14:04:00-04:00","created_at":"2017-08-23T14:12:05-04:00","vendor":"The Genie Company","type":"Universal Dual Frequency Conversion Kit","tags":["Dual Frequency Conversion Kit"],"price":6499,"price_min":6499,"price_max":6499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43888975747,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"36359R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Universal Garage Door Opener Remote Upgrade \/ Conversion Kit","public_title":null,"options":["Default Title"],"price":6499,"weight":726,"compare_at_price":null,"inventory_quantity":998,"inventory_management":"shopify","inventory_policy":"continue","barcode":"050049015640"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36359R_Conversion_Kit.jpg?v=1560971621","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Genie_GIRUD_Dual_Frequency_Radio_Conversion_Kit.jpg?v=1560971575","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Genie_GIRUD_Dual_Frequency_Radio_Conversion_Kit_v2.jpg?v=1560971575","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/NewProject1.gif?v=1560971575"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/36359R_Conversion_Kit.jpg?v=1560971621","options":["Title"],"content":"\u003cp\u003eThe Genie Universal Dual Frequency Remote Conversion Kit is used to upgrade nearly any model garage door opener to use modern (secure) remotes. This GIRUD-1T comes with one garage door opener 3-button remote and works with all of our current or previous style Genie Intellicode remotes. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUniversal- works with nearly all model garage door openers that have required safety beams installed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eActs as a replacement receiver for older model garage door openers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncludes one 3-button remote, one receiver, one transformer, electrical wire (two-wire), and instructions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThe kit alleviates interference issues with Radio Frequency interference by offering\u003cspan\u003e dual frequency to alleviate issues from the land mobile radio communication system used by military bases as part of the homeland security efforts\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntellicode access security system provides state-of-the-art security for your home by automatically changing the opener's access code every time the remote operates; helps prevent unauthorized entry\u003c\/li\u003e\n\u003cli\u003eEach button on the 3-Button remote can be programmed to other Genie Intellicode model garage door openers\/ Intellicode receivers (use the one remote on up to three separate operators)\u003c\/li\u003e\n\u003cli\u003eModel GIRUD-1T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Universal_Dual_Frequency_Conversion_Kit.pdf?4144\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e PDF Instructions for the GIRUD-1T Universal Radio Reciever Conversion Kit \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Radio Receiver Conversion Kit with Programming Instructions for use with all brands of garage door openers \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomer Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy purchasing a \u003cspan\u003eUniversal Radio \u003c\/span\u003e\u003cspan\u003eReceiver Conversion Kit with\u003c\/span\u003e Rolling Code system, you can be confident that you’re equipping your garage door opener with the best possible defense against the threat of code grabbers.\u003c\/p\u003e\n\u003cp\u003eWe’ve broken the installation process into easy-to-follow steps. If at any time during the installation process you have questions, please call the Customer Service department at 1-800-354-3643.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_tools_needed_large.png?v=1558715366\" alt=\"GIRUD-1T Parts Identification and tools for installation \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGetting Started FIGURE 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Installation\u003c\/strong\u003e\u003cbr\u003eThe installation process for your Universal Radio Receiver Conversion Kit will vary slightly depending upon your opener’s radio system.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eWARNING \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe power cord must be unplugged before attaching any wires. Be sure wire ends do not touch each other or other terminals. If your opener is equipped with a Wireless Keypad or you use other access devices such as a mini-remote control, the batteries must be removed from these devices as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_1_large.png?v=1558715250\" alt=\"GIRUD-1T Figure 1 installation instructions \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Unplug, or open the breaker that supplies power to the garage door opener.\u003cbr\u003eWHICH DO YOU HAVE, AN INTERNAL OR EXTERNAL RADIO?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e For openers with internal radios.\u003cbr\u003e• REMOVE batteries from all old remote controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e For openers with external radios.\u003cbr\u003e• Disconnect the existing external radio receiver from the garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting the Universal Receiver FIGURE 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_2_large.png?v=1558715291\" alt=\"GIRUD-1T Figure 2 Installation Instructions \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Position the receiver on the ceiling above and in front of the opener (between the opener and the garage door) so that the receiver is at least 2 feet from the opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Mount Receiver using two pan head screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Do not attach the Receiver to the garage door opener’s mounting hardware. Attaching the Receiver to the mounting bracket or other metal surfaces could cause interference or grounding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Do not remove the circuit board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting Receiver to Door Opener FIGURE 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_3_large.png?v=1558715637\" alt=\"GIRUD-1T Figure 3 Installation Instructions Connecting the receiver \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA \u003c\/strong\u003eCut wire; enough to run from the garage door opener terminal strip to the Receiver.\u003cbr\u003e• The location of the terminal strip varies from model to model. It may be located on the back, front or sides of the opener or underneath the light lens. If you cannot locate the terminal strip, please refer to the Owner’s Manual of your opener or contact the manufacturer of the opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Strip and route wires.\u003cbr\u003e• Remove 1\/2˝ of insulation from the garage door opener end of the wire.\u003cbr\u003e• Remove 1\/4\" of insulation from the Receiver end of the wire.\u003cbr\u003e• Route wire from Receiver to garage door opener terminal strip making sure the wire is clear of all moving parts of the door and door hardware.\u003cbr\u003e• Staple wire in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Drive staples just tight enough to hold the wire. Staples driven too tightly can short circuit the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e Wire the receiver.\u003cbr\u003e• Connect the STRIPED Wire to “WALLBUTTON” terminal on the Receiver.\u003cbr\u003e• Connect the WHITE Wire to “COMMON” terminal on the Receiver. (Do not tighten screw yet. Another wire will be added later).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD\u003c\/strong\u003e Wire the garage door opener.\u003cbr\u003e• Follow existing wires from Wall Button to the terminal strip on the door opener.\u003cbr\u003e• Connect the WHITE Wire to one of the Wall Button terminals.\u003cbr\u003e• Connect the STRIPED Wire to the other Wall Button terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting Receiver to Transformer FIGURE 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCAUTION: Be sure wire ends do not touch each other or other terminals.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA \u003c\/strong\u003eCut wire; enough to run from Receiver to transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Strip and route wires.\u003cbr\u003e• Remove 1\/2˝ of insulation from the transformer end of the wire.\u003cbr\u003e• Remove 1\/4˝ of insulation from the Receiver end of the wire. \u003c\/p\u003e\n\u003cp\u003e• Route wire from Receiver to the transformer, making sure wire is clear of all moving parts of the door and door hardware.\u003c\/p\u003e\n\u003cp\u003e• Staple wire in place.\u003c\/p\u003e\n\u003cp\u003eNOTE: Drive staples just tight enough to hold the wire. Staples driven too tightly can short circuit the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e Wire the Receiver.\u003cbr\u003e• Connect STRIPED Wire to “POWER” terminal.\u003cbr\u003e• Connect WHITE Wire to “COMMON” terminal.\u003cbr\u003e• Now tighten the screw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD\u003c\/strong\u003e Wire the transformer.\u003cbr\u003e• Connect the STRIPED Wire to either terminal.\u003cbr\u003e• Connect the WHITE Wire to the other terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e It does not matter which wire is connected to which terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eE\u003c\/strong\u003e Connect to the power source\u003cbr\u003e• Plug in the garage door opener.\u003cbr\u003e• Plug in the transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour  Universal Radio Reciever Conversion kit system is now ready to program! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgramming the Receiver FIGURE 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_4_large.png?v=1558716165\" alt=\"GIRUD-1T Installation figure 4 Programming the receiver \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: During programming, the Door Opener could begin to run. Stay away from moving Door and its parts. To keep Door from moving, close Door using the wall button and disconnect it from Opener by pulling Emergency Release Cord (see Owner’s Manual).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Locate Learn Code Button and Learn Code Indicator LED on the side of the receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eB\u003c\/strong\u003e Press and release Learn Code Button.\u003cbr\u003e• Indicator LED will blink about 2 times\u003cbr\u003eper second.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e Press transmitter button once within 30 seconds.\u003cbr\u003e• Indicator LED stays on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD\u003c\/strong\u003e Press the same transmitter button again within 30 seconds to set Code.\u003cbr\u003e• Indicator LED turns off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eE\u003c\/strong\u003e Press transmitter button again.\u003cbr\u003e• Door should move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF\u003c\/strong\u003e Press transmitter button again.\u003cbr\u003e• Door should stop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e If you do not perform steps C and D quickly enough, the LED will begin flashing rapidly. Begin programming again at Step B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eIf the Receiver does not respond properly at any time during programming, check the wiring and connections between the Receiver and transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eIf door opener does not respond properly, check wiring and connections between Receiver and Opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eG\u003c\/strong\u003e Repeat Steps 5A through 5G for each Transmitter, Wireless Keypad or other access devices to be learned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 6 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransmitter Function\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eAfter successfully programming the receiver and all transmitters, engage the garage door. (See Owner’s Manual for instructions.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Point Transmitter toward opener and press button.\u003cbr\u003e• Door moves.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eB\u003c\/strong\u003e Press Transmitter button again.\u003cbr\u003e• Door will stop moving.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eC\u003c\/strong\u003e Press Transmitter button again.\u003cbr\u003e• The door will move in the opposite direction. The door will stop automatically at the fully open and fully closed positions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: TEST CONTACT REVERSE SYSTEM of your door opener. See your door opener Owner’s Manual for the procedure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 7 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisabling the Old Radio System FIGURE 5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"GIRUD-1T Figure 5 Installation instructions disabling the old radio system\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_5_large.png?v=1558717168\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR ADDITIONAL SECURITY YOU MUST NOW DISABLE THE OLD RADIO SYSTEM.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA \u003c\/strong\u003eThrow away all old remote controls, wireless keypad, and other access devices.\u003cbr\u003e• Make sure batteries have been removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e For garage door openers with internal radios.\u003cbr\u003e• Cut off antenna.– Most antennas are thin pieces of wire hanging from the opener. Some are thin strips of metal. If you can’t find the antenna, see your Opener’s Owner’s Manual or contact the manufacturer.\u003c\/p\u003e\n\u003cp\u003e• Change code settings.\u003cbr\u003e– Locate the code switches.\u003cbr\u003e– If they are not obvious, check inside the Light Lens.\u003cbr\u003e• Change the combination of up and down switches in the garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e It is essential that you also change the code settings in case someone may have copied your code.\u003c\/p\u003e\n\u003cp\u003eInstead of switches, some garage door openers had a series of numbered holes with a small strand of metal or wire running across the hole called “punch outs.”To change the code you simply break one or two additional punch outs in the garage door opener. Some garage door openers have no code switches or punch outs. If you are unable to locate the settings or cannot change them, refer to your Opener’s Owner’s Manual or contact the manufacturer of your opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC\u003c\/strong\u003e For garage door openers with external radios.\u003cbr\u003e• Remove existing radio receiver.\u003cbr\u003e• Throw away the existing external radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 8 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eErasing Receiver Memory\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: During programming, the Door Opener could begin to run. Stay away from moving Door and its parts. To keep Door from moving, close Door using the wall button and disconnect it from Opener by pulling Emergency Release Cord (see Owner’s Manual).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf a Transmitter becomes lost or stolen or you want to delete a Transmitter, Wireless Keypad or other access devices:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA\u003c\/strong\u003e Press and hold Learn Code Button for 10 seconds or until Learn Code Indicator LED goes out.\u003cbr\u003e• All Transmitter Codes are erased from memory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e Reprogram Receiver with remaining Transmitters.\u003cbr\u003e• Follow Step 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Step 9 Battery \/ Visor Clip Installation FIGURE 6\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/GIRUD-1T_Installation_figure_6_large.png?v=1558719485\" alt=\"GIRUD-1T instructions figure 6 battery- visor clip installation \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Gently pry off back of transmitter case. Take care when opening.\u003cbr\u003e– Use a ballpoint pen, coin or small screwdriver.\u003cbr\u003e• Remove the old battery and install a new battery of the same type in same position.\u003cbr\u003e• Press the halves of the transmitter together until it snaps closed.\u003c\/p\u003e\n\u003cp\u003eNOTE: FCC and IC CERTIFIED\u003cbr\u003eThis device complies with FCC Part 15 and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular situation. If this equipment does cause harmful interference to radio or television reception, which may be determined by turning the equipment OFF and ON, the user is encouraged to try and correct the interference by one or more of the following measures: (a) Re-orient or relocate the receiver antenna, (b) Increase the separation between the opener and receiver, (c) Connect the opener into an outlet on a circuit different from that to which the receiver is connected, and (d) Consult your local dealer. Any modifications or changes to this equipment which are not expressly approved by the manufacturer could void the user's authority to operate the equipment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}

Universal Garage Door Opener Remote Upgrade / Conversion Kit

Product Description
$64.99
Maximum quantity available reached.

The Genie Universal Dual Frequency Remote Conversion Kit is used to upgrade nearly any model garage door opener to use modern (secure) remotes. This GIRUD-1T comes with one garage door opener 3-button remote and works with all of our current or previous style Genie Intellicode remotes. 

  • Universal- works with nearly all model garage door openers that have required safety beams installed
  • Acts as a replacement receiver for older model garage door openers
  • Includes one 3-button remote, one receiver, one transformer, electrical wire (two-wire), and instructions
  • The kit alleviates interference issues with Radio Frequency interference by offering dual frequency to alleviate issues from the land mobile radio communication system used by military bases as part of the homeland security efforts
  • Intellicode access security system provides state-of-the-art security for your home by automatically changing the opener's access code every time the remote operates; helps prevent unauthorized entry
  • Each button on the 3-Button remote can be programmed to other Genie Intellicode model garage door openers/ Intellicode receivers (use the one remote on up to three separate operators)
  • Model GIRUD-1T

 

 California Residents: Proposition 65 WARNING

Sku: 36359R

 PDF Instructions for the GIRUD-1T Universal Radio Reciever Conversion Kit 

Universal Radio Receiver Conversion Kit with Programming Instructions for use with all brands of garage door openers 

Customer Information

By purchasing a Universal Radio Receiver Conversion Kit with Rolling Code system, you can be confident that you’re equipping your garage door opener with the best possible defense against the threat of code grabbers.

We’ve broken the installation process into easy-to-follow steps. If at any time during the installation process you have questions, please call the Customer Service department at 1-800-354-3643.

 

GIRUD-1T Parts Identification and tools for installation

Step 1

Getting Started FIGURE 1

Pre-Installation
The installation process for your Universal Radio Receiver Conversion Kit will vary slightly depending upon your opener’s radio system.

WARNING 

The power cord must be unplugged before attaching any wires. Be sure wire ends do not touch each other or other terminals. If your opener is equipped with a Wireless Keypad or you use other access devices such as a mini-remote control, the batteries must be removed from these devices as well.

GIRUD-1T Figure 1 installation instructions

A Unplug, or open the breaker that supplies power to the garage door opener.
WHICH DO YOU HAVE, AN INTERNAL OR EXTERNAL RADIO?

B For openers with internal radios.
• REMOVE batteries from all old remote controls.

C For openers with external radios.
• Disconnect the existing external radio receiver from the garage door opener.

Step 2

Mounting the Universal Receiver FIGURE 2

GIRUD-1T Figure 2 Installation Instructions

A Position the receiver on the ceiling above and in front of the opener (between the opener and the garage door) so that the receiver is at least 2 feet from the opener.

B Mount Receiver using two pan head screws.

NOTE: Do not attach the Receiver to the garage door opener’s mounting hardware. Attaching the Receiver to the mounting bracket or other metal surfaces could cause interference or grounding.

NOTE: Do not remove the circuit board.

Step 3

Connecting Receiver to Door Opener FIGURE 3

GIRUD-1T Figure 3 Installation Instructions Connecting the receiver

A Cut wire; enough to run from the garage door opener terminal strip to the Receiver.
• The location of the terminal strip varies from model to model. It may be located on the back, front or sides of the opener or underneath the light lens. If you cannot locate the terminal strip, please refer to the Owner’s Manual of your opener or contact the manufacturer of the opener.

B Strip and route wires.
• Remove 1/2˝ of insulation from the garage door opener end of the wire.
• Remove 1/4" of insulation from the Receiver end of the wire.
• Route wire from Receiver to garage door opener terminal strip making sure the wire is clear of all moving parts of the door and door hardware.
• Staple wire in place.

NOTE: Drive staples just tight enough to hold the wire. Staples driven too tightly can short circuit the wiring.

C Wire the receiver.
• Connect the STRIPED Wire to “WALLBUTTON” terminal on the Receiver.
• Connect the WHITE Wire to “COMMON” terminal on the Receiver. (Do not tighten screw yet. Another wire will be added later).

D Wire the garage door opener.
• Follow existing wires from Wall Button to the terminal strip on the door opener.
• Connect the WHITE Wire to one of the Wall Button terminals.
• Connect the STRIPED Wire to the other Wall Button terminal.

Step 4

Connecting Receiver to Transformer FIGURE 3

CAUTION: Be sure wire ends do not touch each other or other terminals.

A Cut wire; enough to run from Receiver to transformer.

B Strip and route wires.
• Remove 1/2˝ of insulation from the transformer end of the wire.
• Remove 1/4˝ of insulation from the Receiver end of the wire. 

• Route wire from Receiver to the transformer, making sure wire is clear of all moving parts of the door and door hardware.

• Staple wire in place.

NOTE: Drive staples just tight enough to hold the wire. Staples driven too tightly can short circuit the wiring.

C Wire the Receiver.
• Connect STRIPED Wire to “POWER” terminal.
• Connect WHITE Wire to “COMMON” terminal.
• Now tighten the screw.

D Wire the transformer.
• Connect the STRIPED Wire to either terminal.
• Connect the WHITE Wire to the other terminal.

NOTE: It does not matter which wire is connected to which terminal.

E Connect to the power source
• Plug in the garage door opener.
• Plug in the transformer.

Your  Universal Radio Reciever Conversion kit system is now ready to program! 

Step 5

Programming the Receiver FIGURE 4

GIRUD-1T Installation figure 4 Programming the receiver

 

WARNING: During programming, the Door Opener could begin to run. Stay away from moving Door and its parts. To keep Door from moving, close Door using the wall button and disconnect it from Opener by pulling Emergency Release Cord (see Owner’s Manual).

A Locate Learn Code Button and Learn Code Indicator LED on the side of the receiver.


B Press and release Learn Code Button.
• Indicator LED will blink about 2 times
per second.

C Press transmitter button once within 30 seconds.
• Indicator LED stays on.

D Press the same transmitter button again within 30 seconds to set Code.
• Indicator LED turns off.

E Press transmitter button again.
• Door should move.

F Press transmitter button again.
• Door should stop.

NOTE: If you do not perform steps C and D quickly enough, the LED will begin flashing rapidly. Begin programming again at Step B.

NOTE: If the Receiver does not respond properly at any time during programming, check the wiring and connections between the Receiver and transformer.

NOTE: If door opener does not respond properly, check wiring and connections between Receiver and Opener.

G Repeat Steps 5A through 5G for each Transmitter, Wireless Keypad or other access devices to be learned.

Step 6 

Transmitter Function

NOTE: After successfully programming the receiver and all transmitters, engage the garage door. (See Owner’s Manual for instructions.)

A Point Transmitter toward opener and press button.
• Door moves.


B Press Transmitter button again.
• Door will stop moving.


C Press Transmitter button again.
• The door will move in the opposite direction. The door will stop automatically at the fully open and fully closed positions.

WARNING: TEST CONTACT REVERSE SYSTEM of your door opener. See your door opener Owner’s Manual for the procedure.

Step 7 

Disabling the Old Radio System FIGURE 5

GIRUD-1T Figure 5 Installation instructions disabling the old radio system

FOR ADDITIONAL SECURITY YOU MUST NOW DISABLE THE OLD RADIO SYSTEM.

A Throw away all old remote controls, wireless keypad, and other access devices.
• Make sure batteries have been removed.

B For garage door openers with internal radios.
• Cut off antenna.– Most antennas are thin pieces of wire hanging from the opener. Some are thin strips of metal. If you can’t find the antenna, see your Opener’s Owner’s Manual or contact the manufacturer.

• Change code settings.
– Locate the code switches.
– If they are not obvious, check inside the Light Lens.
• Change the combination of up and down switches in the garage door opener.

NOTE: It is essential that you also change the code settings in case someone may have copied your code.

Instead of switches, some garage door openers had a series of numbered holes with a small strand of metal or wire running across the hole called “punch outs.”To change the code you simply break one or two additional punch outs in the garage door opener. Some garage door openers have no code switches or punch outs. If you are unable to locate the settings or cannot change them, refer to your Opener’s Owner’s Manual or contact the manufacturer of your opener.

C For garage door openers with external radios.
• Remove existing radio receiver.
• Throw away the existing external radio receiver.

Step 8 

Erasing Receiver Memory

WARNING: During programming, the Door Opener could begin to run. Stay away from moving Door and its parts. To keep Door from moving, close Door using the wall button and disconnect it from Opener by pulling Emergency Release Cord (see Owner’s Manual).

If a Transmitter becomes lost or stolen or you want to delete a Transmitter, Wireless Keypad or other access devices:

A Press and hold Learn Code Button for 10 seconds or until Learn Code Indicator LED goes out.
• All Transmitter Codes are erased from memory.

B Reprogram Receiver with remaining Transmitters.
• Follow Step 5.

 Step 9 Battery / Visor Clip Installation FIGURE 6

GIRUD-1T instructions figure 6 battery- visor clip installation

• Gently pry off back of transmitter case. Take care when opening.
– Use a ballpoint pen, coin or small screwdriver.
• Remove the old battery and install a new battery of the same type in same position.
• Press the halves of the transmitter together until it snaps closed.

NOTE: FCC and IC CERTIFIED
This device complies with FCC Part 15 and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular situation. If this equipment does cause harmful interference to radio or television reception, which may be determined by turning the equipment OFF and ON, the user is encouraged to try and correct the interference by one or more of the following measures: (a) Re-orient or relocate the receiver antenna, (b) Increase the separation between the opener and receiver, (c) Connect the opener into an outlet on a circuit different from that to which the receiver is connected, and (d) Consult your local dealer. Any modifications or changes to this equipment which are not expressly approved by the manufacturer could void the user's authority to operate the equipment.

 

 

 

Questions & Answers

Ask a Question
  • is this compatible with the lear car2u system?

    Yes it is!

  • can this be programed to my 2015 toyota camri

    Yes it can! 

  • Is this compatible with Genie GT912 ? If yes is it easy to change it or has to be done by technician?

    The universal garage door opener remote upgrade/ conversion kit will work to replace the GT912 remote, however once installed, the GT912 remote will not work once it is installed. It will work with the new style Intellicode remote that comes with it, and any other Intellicode remote. It does come with instructions and is easy to install yourself. 

  • Is this compatible with very old systems? I have a Genie opener from 1993 and looking to see if it is able to be upgraded. Works great still.

    Yes, this will work with a unit from 1993. 

  • Will this item be compatible with a #12A opener?

    Yes, it is. 

  • I have 2 Moore-O-Matic 838 garage door openers. They were likely installed in 1978 or 1979. It's a great opener but does not have the safety lasers. I have no remote openers that work. Will this conversion kit work? Can one be used with 2 doors?

    We cannot recommend updating any garage door opener without the installed safety beams, this will not work. One conversion kit will not work on two separate garage door openers. 

  • I have A 1/2 H.P Model ISD 1000 that only works off the wall unit only .. and the only light which comes on is red on panel...troubleshooting did not do...I assume the circuit card bad.com...where cab I find the number

    The circuit board that controls the remotes would be the 36600R.S control board

  • How do I program two remotes? model girud-1t

    You will program each remote separately. One at a time, press and release the learn code button on the receiver box of the GIRUD-1T. Then take the remote, step a few feet away and press and release the button on the remote three to four times. The door will open or close. Then repeat with the second remote.

  • Will this work with the Silent Max connect model# 3053 and the several remotes that are already programmed for it? Also, will I need to reprogram my smartphones to use the Alladin remote feature?

    This will work with the 3053 model. You will have to program the remotes you have into this conversion kit. The Aladdin Connect will not need to be reprogrammed, it will work as normal.

  • Will this work with a Wayne Dalton Quantum 3213?

    Yes, it will.

  • will this work with a model 400 opener from 1985-86, that does not have any of the new safety devices?

    No, it will not.

  • Will this work with the Genie Cryptar II Model No. AR -79?

    No, it will not.

  • is this compatable with homelinkon fords?

    Yes, it is.

  • Can this be used to replace a Genie receiver model ACSR3G type ERY?

    Yes, it can.

  • Will this be compatible with a Genie Model 200 from 1976?

    No, this will not work with any garage door opener that does not have safe-t-beams.

  • Will it work on a genie GS850

    This will work on any Genie garage door opener that has the Safe-T-Beams attached.