Free Shipping on all U.S. Orders $17.99+

G3T-R 3-Button Remote (2 Pack)

Product Description
Maximum quantity available reached.

This bundle pack includes 2- Compact size 3-button remote controls that have a sleek design with three easy to push buttons. They also feature rolling-code technology for enhanced security. This allows for quick and easy opening or closing of your garage door. They utilize dual frequencies 315 MHz and 390 MHz leading to less operation interference.

  • Can control up to 3 compatible Genie garage door openers
  • Sleek compact design allows it to clip to any car visor or attach to a key chain
  • Auto Seek Dual Frequency 390/315 MHz
  • The visor clips are included
  • Uses one 3V CR2032 Battery (for each remote) Both are included
  • Also equivalent to 37330R, G3T-BX 
  • Compatible with Genie garage door openers manufactured since 1997, replaces these popular older model Genie remotes; GICTD-1, GICTD-3, GIT-1, G2T-1, GIT-2, G2T-2, GIT-3, G2T-3, GICTD390-1, GICTD390-3, GMIC90-2, GMIC90-3, GIFT390-1, GIFT390-4, GMI3, GIFTD-1, GIFTD-3, GITD-3, GIC90-1, GIC90-2, GIC90-3 (and more)


     California Residents: Proposition 65 WARNING

    Sku: 39904R

    G3T-R Three Button Remote Programming Video 


     G3T-R Three Button Remote Programming Instruction Manual

    Genie G3T-R  Three Button Garage Door Opener Remote Programming Instructions (for the two pack, follow the instructions and repeat for the second additional remote)

    1- Putting the Genie Garage Door Opener into Programming Mode

    For New Genie® Garage Door Openers

    1. Press and hold the square program/set button until the round LED light turns blue, then release the button.

    2. The round LED light will go out and the long LED light will then begin flashing purple.

    Proceed to step 2.   


    For Genie® Garage Door Openers and External Receivers Manufactured between 1995 to 2011

    1. Press & Release small round Learn Code button one time. The red LED will begin to blink beside the button. 

    Proceed to step 2.

    2- Programming a G3T Three Button Remote to your Genie Garage Door Opener

    NOTE: Once the operator is in programming mode, you will have approximately 30 seconds to perform this step (if the LED light stops blinking before this step, repeat the above steps again)

    1. Pull the protective battery tab out from the G3T remote.

    Image removing pull tab from a new G3T-R Genie remote

    Note: While programming any of the three remote buttons, stand at least 5 feet away from the garage door opener powerhead. This ensures you have proper communication between the remote and the garage door opener.

    2. Slowly press and release the G3T remote button of your choice two times. The garage door opener LED lights will flash and go off, this indicates you have successfully programmed your new G3T remote.

    3. Press and release the same button on the remote a third time and the garage door will open or close. It is possible during this process to press the remote button too quickly or lightly. If the LED lights do not go OFF while programming, press the remote button that you are programming several more times to achieve confirmation.

    3- For Lost or Stolen Remotes- Erasing all Remotes from the garage door opener 

    New Genie® Garage Door Openers

    1. Press and hold the Square program button until the round LED turns blue, then release.

    2. Press and hold the Up(+) Down (-) buttons at the same time, until both LED lights flash blue and then go OFF.

    For Genie® Garage Door Openers and External Receivers Manufactured between 1995 to 2011

    • To erase all of the remote devices from all other types of Genie® openers, Press and hold the Learn Code Button until the LED light stops blinking.

    Start at step 1 to reprogram your remotes.

    NOTE: Clearing remote control memory from the power head will clear ALL programmed remotes and keypads. Your opener will no longer recognize any signal from any remote device, including a missing remote device.

    4- Battery Replacement

    Replace the remote battery with 1- CR2032 coin cell battery.

    1. Open the remote case using a washer or coin that fits into the slot at the top of the remote.

    Image replacing battery on a G3T-R Genie 3 Button remote

    2. Replace the battery. Match battery polarity symbols inside the battery housing.

    3. Align components and snap case closed.


    NOTE: For openers manufactured between 1995-1997, use the two upper buttons on the remote. Made after 1997? Use any button for programming.


    For additional information or help contact customer service: Call 1-800-35-Genie




    Ask a Question
    • does this remote work on GIT-3?

      Yes, the G3T-R 3-Button Remote (2 Pack) is a compatible replacement for the GIT-3.

    • Does this remote work for garage door model 7035?

      Yes, the G3T-R 3-Button Remote (2 Pack) is compatible with model 7035.

    • Does this remote work with Model 2028

      Yes, the G3T-R 3-Button Remote (2 Pack) will work with model 2028.

    • Does the G3T-R work for model 3042?

      Yes, the G3T-R 3-Button Remote (2 Pack) is compatible with model 3042.

    • I have a Genie Pro98-S. Do you know which remote will work with these openers? Looking for a keychain remote...hoping to find one that will work multiple units.

      With this model you would need a GM3T-R remote, it will work up to 3 garage door openers.

    • I have a G3T - A and Model # 3055, will the G3T-R 3-Button Remote work the same ?

      Yes the G3T-R is the same as the G3T both are compatible with the model 3055.

    • I have a G3T, will the G3T-R work the same

      Yes, the G3T and G3T-R are the same remote control.

    • Does this work with Genie Model ISD995?

      Yes, it does!

    • I have a B6172H will these remotes work with it?

      Yes, they will!

    • I have model 3120. Will this remote fit?

      The G3T-R remote will work with the 3120 model garage door openers.

    • Does the G3T remote work with the IS950/A

      Yes, it does!

    • Will a G3T-R replace a G3T-A remote?

      Yes, it will!

    • will this work on a pcg650

      Yes, it will.

    • Will these work with model number H400A

      Yes, they will.

    • how do you progam te rempte

      Use these remote programming instructions to program the G3T-R garage door opener remote.

    • I need to replace my 2 GITR 3 remotes used on a model 2022 opener. Which model openers would be a compatible replacement?

      The 2022 model garage door opener is an Intellicode model. You can use these G3T-R remotes, the G1T-BX remotes, or the GITR3-BX remotes like you had.

    • I have Model G3T-A what is the correct replacement?

      You can replace it with the G3T-R remote.

    • Lost one of our remotes and the one we have is a G3T-A, is the GT3T-R compatable?

      Yes, it is!

    • I have two Genie model number 7055 garage door opener‘s. I want to know if the three button remote will control both garage doors. If so how do I program the second door?

      Yes, this remote will work to control both garage doors. You will follow these programming instructions using the button you want to operate the second garage door.

    • Does the G3T-R work with model opener ISD 1000?

      Yes, the G3T-R remote does work with the ISD1000 model garage door opener.

    • Will this remote be compatible with model 2020L.

      Yes, it will!

    • Which remote do I need for the Professional Line Model 3024

      You can use any of the current Genie Intellicode model garage door opener remotes.

    • Will this work with the TriloG 1200 Model 3064?

      Yes, they will!

    • What remote do i need for a mod #sd9500 opener?

      You would need the Genie Master Remote, model GM3T-R.

    • Can the G3T-A be programmed to open the community gate? When I moved in, I received an older remote from the HOA which has 8 dip switches. If so, where can I find the info? Thanks!

      No, the G3T remotes will not work with dipswitch style receivers.

    • My model number is ACSR3 1/2 MIDEL H40004 WILL this work for my doors

      Yes, the G3T-R remote will work with the H4000 model garage door openers.

    • Can one of the buttons be programmed to turn on the light and not open the door

      No, the remote buttons will not turn the light on without opening or closing the garage door.

    • Will this remote work with model OCG710

      Yes, it will!

    • I am using this remote on a powerlifting 900 model 2562. When pressed, the top button is displaying the red light below the genie logo and I need it to display the green light. How do I change the intellicode so that it displays green?

      Press and hold the remote button for 10 seconds. Both Red and Green LEDs come ON and stay ON. Press the same button twice to toggle IntelliCode® selection from IntelliCode® 2 to IntelliCode® 1.

    • I already have 2 of these openers. Can I add 2 more openers and they will work with the other openers so I would 4 openers working total?

      Yes, you can. The older model Genie garage door openers held up to 7 wireless devices (that will work together at one time), the newer style holds up to 20 wireless devices, so you should have no problem with the four.

    • Does this remote work with Model H8000-07?

      Yes, it does!

    • Will work with a PCG650?

      Yes, it will!

    • Does the G3T-R remote work with Model "Genie SilentMax 1000"?

      Yes, it does.

    • I have model 3053, will this remote work

      Yes, the G3T remote will work with the 3053 model garage door opener.

    • Does this remote work with model 2028?

      Yes, it does!

    • Does the G3T-R work with a G3T-A?

      Yes, it does. 

    • Does the genie gt3 Work with Chamberlain garage Door openers?

      No, it does not. 

    • will a G3T-R work with an SP 99?

      No, it will not. You would need the Genie Master Remote, GM3T-R. 

    • Will the G3T-R remote work with Genie Excelerator? Purchased/installed 10/2000 according to the records. The manual says it is "Complete with Intellicode Remote Control and Series II Electronics" and the accessories Order form lists the GIT-1, GIT-2BL, GIT-3BL. THANKS.

      Yes, it will. 

    • Is my G3T-A compatible with G3T-R?

      Yes, the G3T-R is the same remote as the G3T-A. 

    • Will the work for model 2024

      Yes, the G3T-R remote will work with the 2024 model garage door openers! 

    • Do these have to have a certain code to work with the garage door you have How do replacements work

      The code is a rolling code. It works once you program the remote to your garage door opener. 

    • does the GT3-R remote work on genie model ISD 9990?

      Yes, it will. 

    • Does the G3T-R remote work with Genie Model ISD990 opener? Thank You!

      Yes, it does! 

    • I have model 2028, does it fit?

      Yes, it does! 

    • Will the G3T-R work with a model 7055?

      Yes, it will! 

    • I have model 4063 opener. Will these remotes work with opener ?

      Yes they will! 

    • I have a Genie model 4062 opener. Will these remotes work?

      Yes these G3T- R remotes will work with the 4062 model garage door opener. 

    • I have an genie excelerator ll will this remote work?

      Yes! These G3T-R remotes will work with the Genie Excelerator II. 

    • Does the G3T-R remote work with Genie Models 2060L-07 and 3060L-07?

      Yes it does!

    Related products