GM3T-R 3-Button Genie Master® Remote

I have a genie gx9000 , would this remote work

No. For the GX9000 you would need to use the GM3T-R (Genie Master Remote). https://store.geniecompany.com/collections/remotes/products/3-button-geniemaster-remote

I have Model/Modèle 315390R1 will it work for this one?

Yes, the GM3T-R 3-Button Genie Master® Remote is a compatible replacement for the Genie model remote 315319R1.

I have an old Lift-A-Dor LD100 (12 DIP switches). Do you think the GM3T remote will work with that opener?

Yes, the GM3T-R 3-Button Genie Master® Remote is compatible with Lift-A-Dor model LD 100.

What is he range of this opener GM3T-R 3-Button Genie Master® Remote

The range of the GM3T-R 3-Button Genie Master® Remote should be anywhere from 25 feet to 200 feet depending on local area interference.

I have a IS850 will this remote work ok

Yes, the GM3T-R 3-Button Genie Master® Remote is compatible with the Genie model IS850.

funcionará con un motor Genie modelo 2040 L?

Si la GM3T-R 3-Button Genie Master® Remote es compatible con el modelo 2040L.

I have an H8000D 1/2 H.P., what remote do I need?

The G3T is the best replacement for the Genie model H8000D.

I have Wayne Dalton model # 3012 will this remote work If not what will

Sorry the GM3T will not work a Wayne Dalton operator.  If the Wayne Dalton operator is a frequency of 372.5 Mhz, you can look into the GU4T or the ACSCTG remotes.

Will this work on IS550/A models?

Yes, the GM3T-R 3-Button Genie Master® Remote (geniecompany.com) is compatible with Genie model IS550/A.

Will this remote be compatible with a chamberlain 1/2 garage door opener?

No, the GM3T remote will only work with Genie products.  For Chamberlain products, take a look at the ACSCTG 2-Button Universal remote .

I have a genie gxl 9550 , would this remote work

Yes, the GM3T-R 3-Button Genie Master® Remote is compatible with model GXL9550.

Have model gict390 id BBQ 315390T remote. Will this work

Yes the GM3T-R 3-Button Genie Master® Remote is a compatible replacement for the GICT390.

Will the genie master 3 button remote work with a genie pro max door opener

Yes, the GM3T-R is compatible with the Genie Pro Max.

Will this work with a Multicode opener by Linear?

No, we do not currently make any remotes that work Linear Multicode.

I have a Genie Remote, model number GT912, which remote should I purchase to replace it

The model GM3T-R is compatible.

Will this work with “series II” opener?

Yes, it will.

I have a model G5050, will this remote work for me?

Yes the GenieMaster 3 Button remote will work on the G5050

How can reset this model of remote opener (model #: GM3T)?

You can reprogram the remote to work with different garage door openers. In order to get the remote to no longer work with Intellicode model Genie garage door openers, you would need to clear the receiver on the garage door opener. For assistance, please contact Genie customer service at 1-800-354-3643.

Where can I find instructions on using this remote

You can view the remote instructions here.

how to fully open the sliding door to a Genie remote model GM3T-R? Mine slides open just a bit - not enuf to change battery

The cover should slide the entire way off. Please contact Genie customer service at 1-800-354-3643 for assistance.

Will this work for a Genie Pro 95ic/a?

Yes, it will!

Will this remote work for a SD5050 model?

Yes, it will.

I just bought a home with a screw drive 1/4 HP model SD2500 and they left no remote. Will this remote work with this model?

Yes, the Genie Master Remote will work with the SD2500 model garage door opener.

I have a Genie Screw Drive, 1/3 HP model G8000. I lost my door opener remote and I want to know if this remote would work for my model of garage door door

Yes! The Genie Master Remote will work to replace the G8000 remote.

Is this compatible with model 3055 ?

Yes, it is!

Will The GM3T-R open a craftsman

No, it will not.

I have the model GM3T; and I have been trying to link it to my Honda Pilot homelink button so I can open the garage directly using my car button but it is not working. Is this model not compatible or am doing it wrong? Thanks

The GM3T remote can be used to program Homelink to your vehicle. If you would like assistance with the programming, please contact Genie customer service at 1-800-354-3643.

I have a Genie GXL9550. Is this remote compatible?

Yes! The GM3T-R remote will work with the GXL9550 model garage door opener.

I have pro max garage door opener old one Model number PMT 901. What is newer model number version which replaces.

The Genie Master Remote, GM3T-R will work.

I have a isd990 will it work

Yes, it will.

House has two garage door openers. Genie Intellicode and Overhead Door Legacy. Will GM3T-R 3-Button Genie Master® Remote work with both openers? If not, do you have a model that will? Thanks.

Yes, it will!

Will this work for a professional line Genie ReliaG 650?

Yes, it will!

Where are the reviews for this. what is the range

The reviews for this model are on the bottom if this page. Normal range would be 25-100 feet. This can be different depending on different factors in and around your garage that could interfere with range.

The old opener is a Lift Master with 9 code switches. The switch for code 1 is up toward the #1, switches 2-8 are centered and #9 is on the opposite of code #1 and is pushed farthest from the numbers. I press "B" which equals 9 tri switch, even though there are 12 switches. I have switches 10-12 in the middle as instructed. So after pushing the "B" I then press the middle button on the front and I get the sequence of lights as noted in the instructions. It will not open the door.

The Genie Master remote will not work with LiftMaster brand garage door openers.

What size battery works with this opener?

The GM3T-R Genie Master Remote uses a CR2032 battery.

Are these remotes suppose to close the door as well? After programming both remotes will open the door but they do not close it.

Yes, these remotes should close the garage door as well. It sounds like you may have a problem with the safe-t-beams on your garage door opener if the remotes will open but not close the garage door. Please contact Genie customer service at 1-800-354-3643 for assistance.

This model is compatible with ambassador garage door?

No, it is not.

I just bought the genie GM3T R replacement remote. I have two older Genie 12 dip switch garage door openers. How can I program 2 different buttons on the GM3TR, one for each door? The instructions that were included with the remote don't explain how to do this with the dip switch openers. There has to be a way to enter and memorize 2 different dip switch patterns on a single GM3TR.

You will follow the instructions for matching the dipswitches two times (one for each opener). So once the first one is set, you will move the switches to match the second one and proceed with below. 

To operate a Code Switch equipped operator: 1. Open the opener’s light lens in order to gain access to its row of Code Switches.
These are 3 position switches (+, – and 0).
2. Slide off the rear cover of the remote.
3. Set the Code Switches positions in the remote to match those of the switches in the opener. (If you are working with a 9 switch operator, set the remote switches 10, 11 and 12 to the center or “0” position)
4. Locate the non-rolling code button label inside the Rear Cover.
5. Press the non-rolling code button B, C or D  that matches the appropriate code switch description on the label. The YELLOW LED next to the battery will begin flashing.
6. Press and release the Remote Button you want to assign to that opener—the GREEN LED on the remote will flash for approximately 2 seconds and stop.
7. Pressing the same button again will operate the opener—The RED LED on the remote will flash while the button is pressed.

Will the Genie GM33T work with overhead door phantom

Yes, it will.

My current remote model is GT90-1. Will this unit work with my opener?

Yes, it will!

I have a Genie Pro "stealth", model #GPS 1200ic with "Receiver model #ACSRS I would like to obtain a 2nd remote. The first remote is working fine. What should I buY?

You can use any of the Genie remotes that we sell right now, they are all Intellicode models that will work with the GPS1200IC models.

I have a genie 12HP opener model # PMX500|C/B. Will this opener work ?

Yes, it will!

Will this remote work with a Genie screw drive SD9000?

Yes, it will.

What are the dimensions of this remote? Can it be used on a keychain?

This remote does have a way to attach to a keychain. The dimensions are 3" 1/4 x 2" x 3/4".

Does this remote allow for using the homelink system in vehicles?

Yes, you can use this remote to program your Homelink in your vechicles.

Is this remote compatible as a replacement for the MAT90 model?

Yes, it is.

I have a Genie Master Remote garage door opener Model GM3T Part 37344R that is compatible with an older garage remote that is compatible with B8QACSCT that I purchased from Amazon two to three years ago. I have lost the instructions to the Model GM3T Part 37344R and wanted to know if I can find them anywhere online or could download the instruction.

Instructions for the Genie Master Remote.

I have a Genie 1560/M opener. What model replacement remote do I need?

You can use this GM3T-R Genie Master Remote, the G1T-BX one-button remote, or the G3T-R three-button Intellicode remote.

Hi I have a B8Q GT 25 remote control model, what would be the best remote control replacement for this. Thank you in advance.

Please contact our Genie customer service at 1-800-354-3643 for assistance. We will need some more information about which model garage door opener you have.

Will this replace a GT90?

Yes, it will!

I have a Genie Garage Opening System and lost the remote. Series G, GX and GXL installed in 1993. Can I order a replacement?

Yes, you can use the Genie Master Remote (GM3T-R) for the G, GX, and GXL Series garage door openers.

I have a Genie SD9500 will the GM3T-R Master Remote work on this garage door operator system? Thanks for your answer.

Yes, it will!

Will it work with multicode 10 switch 308911

No, it will not.

Will this remote work with a Linear dip switch gate operator?

No, it will not.

The model number of my remote is ACSGT type 1 I do not see any of them numbers on a replacement remote can you help me

You can use the G1T-BX remote to replace the ACSGT Type 1 remote.

Which remote would work with model #BBQ ACSGT. Type 2. Thank you

You can use this Genie Master Remote, or the G3T-R remote.

I have a model CM8500-S opener. Will this work for me?

Yes, it will.

This remote worked great for the 12 dip switches in my garage door openers, but i guess the opened for the gate is a 10 dip switch style. Any chance this remote is going to work for the 10 dip switch as well?

No, it will not. It will only do the 9 or 12 switch style.

I have an AT95 Genie garage door opener - will the Genie Master remote work?

Yes, it will!

hope all is well with you. I have a 1990's (most likely 1993-95) Genie Pro 88 1/3 hp screw drive opener.(remote has 12 pins) it says Genie 912 on the remote I was wondering if you could direct me to the right remote for it. I have two garage door openers as it's a large two car garage. Will this opener work for this garage? Thank you for your time and God Bless You, Matteo

The Genie Master Remote (GM3T-R) will work with the Genie Pro 88 model garage door opener!

I have a Genie Pro Stealth Model - 120 KG - GPS 12001c receiver model ACSR3G ; Made in Canada. Not sure of the year as I couldn't find it on the controller. Does this opener model GM3T-R 3 button remote work on this Genie controller ???? Appreciate your reply and based on that I'll order 2 of them and try to program them following instructions. My old remote was a old style 2 button Clicker model that died. Thankyou, John Sullivan

Yes, this Genie Master Remote will work with the GPS-1200IC model garage door opener.

Will this remote work for a genie gxl9500

Yes, it will!

I’m not sure of the model of the opener itself but the remote I have is a GT90-1 will this one work as a replacement / extra remote

Yes, it will!

I have a 2022 model opener, will this universal remote work with it?

Yes, it will!

I "inherited" two GM3T remotes. Can the GM3T remote be used to open an older 1996 Liftmaster, with a green learn button? If so would you inform me as to the steps. Thank You

No, these Genie Master Remotes (GM3T) will not work on LiftMaster garage door openers.

I am using one old Genie AT90C remote (1994/95) with 12dip switches with frequency 315mhz. I recently bought the GM3T-R remote and programmed it as per the instructions given, but it won't open my garage door. Any ideas, or does the GM3T-R not work with 315MHZ.

The GM3T-R will work with 315MHZ. Please contact Genie customer service at 1.800.354.3643 for assistance.

I recently purchased a GM3T-R remote to use on my community gate and 2 garage doors. Will you verify that the remote works with a Lanier gate controller model 2000 with communication at 318 Mhz? If it will, what instruction sequence is required to make the connection? p.s. The Red buttons with normal black letters is very hard to read. Suggest you go to White letters. The hover turns the button to Green with White letters!!!

This GM3T-R remote will not work with 318mhz.

I had no problem programming this remote. However, WHY does it only work from inside the garage? It will NOT work through the closed garage door to open it up. Even if I am in my car and my car is sitting in the driveway. It does work to close the door from that same position. This lack of range makes it almost useless. Any suggestions?

This sounds like you are getting interference from something in or around the garage. Interference can be caused by certain LED or CFL light bulbs. It can also be caused by other factors or electronics. For assistance troubleshooting this issue, please contact Genie customer service at 1-800-354-3643.

My old remote is AT85P will this remote work? Thanks

Yes, it will!

I have a Genie SD9005 Screw Drive Operator on my garage door. My remote stopped working and i tried to replace the battery, but it is still not working. I would like to purchase a new remote, but the model number on the remote is worn off. How do I find out if the GM3T remote will work. My existing remote has 2 buttons and inside the remote there are 12 dip switches and above those dip switches there are 4 additional switches that I am not sure what they are for inside the remote. Please help

The GM3T-R remote will work with the SD9005 model garage door opener.

My gate remote says Model:390LMD21V FCC ID:SU7390LMD21V2 FREQ:390MHz SERIAL NO. Y 036967 It's a 9-tri and i can't get the genie remote to work. My remote is model GM3T. Is this one not compatible with my current remote?

If it is a 390 frequency with a 9-Trianary switch setting, the GM3T should work. Please contact Genie customer service at 1-800-354-3643.

I purchased 2 GenieMaster 3 button remote devices for my garage door opener. I am confused by Step 3: 3. Set the Code Switches positions in the remote to match those of the switches in the opener. (If you are working with a 9 switch operator, set the remote switches 10, 11 and 12 to the center or “0” position). I see 12 teeny switches in both remote devices. I do not understand how they are to be set to positions "match those of the switches in the opener". What is the 'opener' if not the actual remote device? Please help ! Please be specific !

The "opener" is referring to the garage door opener on the ceiling. So If you have switches on the garage door opener on the ceiling you will match how those switches are set on the remote.

Will this work with the pro 99?

Yes, it will.

Will the GM3T-R-3 work with an old PRO-82, 1/3 HP model that had an opener labeled AT85P?

Yes, it will!

Will this work with a Linear ACT-31B gate opener that uses a 318 MHz?

No, it will not.

Will this work with Directlift 2060 opener?

Yes, it will.

Will this work with genie excelerator isd1000?

Yes, it will!

I have an old GT 912 model. I do not know what is meant by dip switches do not sure what genie garage opener would replace mine! Please recommend ! Thank you!

The Genie Master Remote (GM3T-R) is what you will need to replace the GT 912 remote.

I have a Genie pmx300ic/b. Will GM3T-R work?

Yes, the GM3T-R Genie Master Remote will work with the PMX300IC/B.

Will this model work to replace a Model GT90-1 single button remote & Genie 1/2hp screw drive motor

Yes, it will.

Genie gxl 9550. Will the GM3T-RT work for this model?

Yes, it will!

I have a GT912 on the back it is B8Q GT50. It is more than 20 years old. Will it work?

Yes, the Genie Master Remote will work with or to replace your GT912 remote.

I have a genie pro stealth. What options for new remotes can I purchase?

You can use any of our remotes we sell right now for the Genie Pro Stealth model. They are all Intellicode model remotes. https://store.geniecompany.com/collections/remotes

how many MHz is this remote?

The Genie Master Remote has Auto Seek Dual Frequency 315/390 MHz, also it works with most Genie openers ever made, including Genie 390 MHz remotes on 9-switch, 12-switch, and 9-switch trinary formats.

I have an old remote Model AT95. Will the GM3T-R replacement remote work? I've lost my second remote and need to find another one that will work with my very old garage door opener.

Yes, this will replace the AT95 remote.

I have a Genie Intellicode Remote Model ACSGT NOT ACSCGT with 3 buttons even though we only have one door. Is there a replacement for this model?

You can use this Genie Master Remote to replace it.

Hi, I have a Genie G5050. It has a row of 12 DIP switches. The instructions for the GM3T-R say: 2. Slide off the rear cover of the remote (FIG. 3). 3. Set the Code Switches positions in the remote to match those of the switches in the opener. (If you are working with a 9 switch operator, set the remote switches 10, 11 and 12 to the center or “0” position) When I take the GM3T-R apart, I don't see any Code Switches. Help! Thanks, Ben

The switches on the Genie Master Remote are behind the back cover. 
Here is the image, 

Hi, I have a Genie G5050. Will the GM3T-R 3-Button Genie Master® Remote work with this model

Yes, it will!

Can it use for model H2000c,ACSR1,

Yes, this will work with the H2000 model.

I have a genie at90 old remote that stopped working. Will the g3t-r work as a replacement?

No, it will not. You will need the Genie Master Remote, model GM3T-R.

Will this work for a 1/3 HP CM 7500 S ?

Yes, it will!

I have a Genie Pro88 with a GR85 reciever. 9 pin 390. Will the Genie master GM3-T remote work?

Yes, it will!

I have a Genie Model AT95 Freq:390 is this the correct replacement?

Yes, it is!

I have a Genie garage door remote Model TBSTG Type 1 that no longer seems to work. I replaced the battery, but still does not function. The Genie garage opener was put in in 2013. What remote replacement do I need to buy that would be compatible with our opener?

You can use any of the remotes we sell right now, they are all Genie Intellicode models and will replace the TBSTG type 1.

can i use gm3t-r remote for my 1/2 h.p mofel is550/a opener ?

Yes you can!

I have a very old Genie Pro 88 1/3 horsepower screw drive garage door opener. Will this master remote work?

Yes, it will!

I have a Genie 1/2 HP G5000. Will this remote work .

Yes, it will!

Will this work for Model 2560/M Receiver ACSR3

Yes, it will!

I have a Genie Screw Drive 1/4 H.P. Model G2500 and have lost the remote. Which replacement remote will work for this?

You can use the Genie Master Remote, GM3T-R.

My sister has the Pro951C/A, will this work or do I need to use the G3T-R? I was looking at the bundle package as I need a new keypad, but it only has this remote type with the bundle.

This remote will work with the Pro95IC/A.   

Will it work with gmt903?

Yes, it will.

I have an AT-90 model. Will this remote work?

Yes, it will!

The model number for my opener is an AT90. Will remote work?

Yes, it will! 

I'm looking for a replacement remote door opener for a Genie Pro98. What do you recommend?

You can use the Genie Master Remote, GM3T-R for the Pro98 operator. 

Will this replace a Model AT90 remote?

Yes, it will. 

I have the genie GM3T R replacement remote. I have two older 12 dip switch garage door openers. Can i program both openers to open using the GM3TR?

Yes you can program it to both! 

Will this remote work with SD8000 opener with 390 frequency? I believe remote now says AT90

Yes, it will. 

I have an old Genie Series SD8000 garage door. The model number of the remote is AT90. Will this work as a replacement?

Yes! This GM3T-R remote will work as a replacement for the AT90 garage door opener remote. 

Will this work with a craftsman garage door opener?

No, it will not. This remote is not universal to work with other brand garage door openers. 

Will this work for a GT-192? (1/2 HP Model PRO98-S)

Yes, it will. 

Does the remote work with a lift master garage door

No, it will not. 

Do you have any remotes for an older model, that does not have photoelectric sensors??

We cannot support any garage door openers that do not have the safety beams installed due to safety regulation laws. 

I have genie model 3060L what remote can I use

You can use any of our remotes on our site right now, they are all Intellicode models and will work with the 3060L opener. Click to View the remote collection. 

I have a genie pro max model pmx500ic will this remote work with this one

Yes, it will.

Will this remote work with my genie cm7600ic/a garage door opener?

Yes, it will! 

I have a genie 2022 opener. Will this remote work?

Yes, it will! 

Would this work with a model 3060L?

Yes it will! 

I have a GT90-1 remote, opener is from 1993. will this remote work?

Yes it will!

Will this remote work with a H4000-07/m garage door opener?

Yes it will!

Is this compatible with the PMX85 model?

Yes, the GM3T remote is compatible with the Genie Model PMX85.

3-Button Genie Master® Remote (GM3T-R) – The Genie Company

I have a 1/2 HP Model H6000-07. Is this compatible?

Yes, this will work with the H6000-07. 

willthis work on a2024?

Yes it will.

Can this be used to replace FC ID:B8Q8KL AT95 Freq390

Yes, the GM3T-R 3-Button Genie Master® Remote can be used to replace the AT95.

in need of programming instructions

Here are the programming instructions.

I have pro Genie 98 will this remorte work

Yes, the GM3T-R 3-Button Genie Master® Remote will work with the Pro 98 garage door opener.

Do I need to climb a ladder to program it.

You will need access to the ceiling unit in order to program your remote.

Does the red light mean the battery is failing?

No, the red light just means the remote is functioning.

will this operate overhead door model 2026

Yes, the GM3T-R 3-Button Genie Master® Remote will work with the Overhead Door 2026 garage door opener.

Model G4050CL, compatible?

Yes, the GM3T-R 3-Button Genie Master® Remote is compatible with Genie model G4050CL.

I have a 1/2 HP Model H4000A garage door motor. Is this remote compatible?

Yes, the GM3T-R will work with the H4000A opener. 

I have a 1/2 hp screw drive the old remote was a genie 912 will this work

Yes the GM3T-R will work to replace the Genie 912 remote. 

Is this remote compatible with a Genie SilentMax 1000?

Yes, the GM3T-R 3-Button Genie Master® Remote will work with your Genie Silentmax 1000 garage door opener.

I have a 1/3 horse power Genie screw drive Model CM 7500-S that shows Wk37, Yr93, P4, IH on the face of the control box. Will the GM3T-R-3-Button Genie Master remote open my garage door?? If so I want 2 of them. Bill Flowers

Yes, the GM3T-R 3-Button Genie Master® Remote will work with your Genie model CM7500-S garage door opener.

Will this work with a ,1992 AT95 remote ?

Yes, the GM3T remote will work in place of your AT95 remote.

I have B8Q8KL ( AT 85) 9-dip switch remote controller stopped working. which one can be purchased to replace it?

You would need the GM3T-R 3-Button Genie Master® Remote.

what is the frequency range that this transmitter operates on?

The GM3T-R 3-Button Genie Master® Remote transmits on 315 and 390 frequency.

What battery does the GM3T use

The model GM3T-R takes a CR2032 battery

I have a genie gx9000 , would this remote work

For the GX9000 you would need to use the GM3T-R (Genie Master Remote).