G1T-BX 1-Button Remote

will this model work with model gmi-3bl

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the Genie model remote GMI-3BL.

Is this remount compatible to model # GICT390

Yes, the G1T-BX 1-Button Remote is a compatible remote replacement for Genie model GICT390.

which remote should I buy for a ACSR1G model door opener

The G1T-BX 1-Button Remote is compatible remote replacement for th ACSR1G.  You can also choose the G3T.

I have a Genie model ACSR3 opener, what replacement remote now matches this model ACRS3 as I need one, thanks

Yes, you can use the G1T-BX 1-Button Remote for an ACRS3 if you only need a one button remote for one garage door.

I need a replacement for a GICT390 remote. I have only one garage door to open and probably do not need three buttons.

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the GICT390 if you need only one button for one garage door.

Will this work with the Genie ModelH4000-07/M

Yes, the G1T-BX 1-Button Remote is compatible with the Genie model H4000-07/M.

Is this remote compatible with the 2020L model?

Yes, the G1T-BX 1-Button Remote is compatible with the Genie model 2020L.

NEED INSTRUCTIONS MANUAL

Here are the instructions for the G1T-BX.

Is this compatible with IntelliG 1000

Yes, the G1T-BX 1-Button Remote is compatible with Genie model IntelliG 1000.

Is the G1T-BX-1 the correct replacement for the ACSCTG type 1 transmitter?

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the ACSCTG type 1 transmitter.

We have a 3020-H or H-B. One remote stopped working, the other works. Will the Remote G3T-A work with this system and can we still use the old remote too?

Yes, both the G1T-BX and the G3T-A (or G3T-BX/G3T-R) are compatible with Genie model 3020H and 3020H-B.

Is it possible to have two of these remotes programmed to my genie 1028-2TX opener?

Yes the 1028 can hold up to 16 remote devices.

What remote works With a genie 2024

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 2024.

We have a genie 2024, does this remote work ?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 2024.

Is this remote good for a genie 2024

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 2024.

We have a Genie g5700, 1/2 horsepower screw drive garage door opener. Should this work on that model?

No, for Genie Model G5700 you would need the GM3T-R remote.

Will this work with genie 2028

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 2028.

How do I open the remote? Do you have a YouTube post showing how?

You can use a coin to push downward in the battery slot to lower the cover.  Push away from the button.

I have a new G1T-A Genie Remote. How do I program it with my Genie Garage Door Opener?

To program the G1T to a Genie operator please follow the below instructions based on your unit:

For a unit with a PRG/SET button on the bottom of the motor head:
To program the remotes, you will need to press and hold the square button on the power head until you see a blue light, then release the square button. When you release a purple blinking, light comes on. Step away from the unit a few feet, and slowly and firmly press and release the button on your handheld remote that you wish to program 3-4 times. The door should operate. When this happens, your remote is programmed. 

For a unit with a learn code button on the motor head:
To program your remote, you will need to locate the “learn code” button on the opener on the ceiling. This is usually on the back of the unit and can sometimes be found under the light cover.  Press and release the learn code button and you will see a red LED light start flashing, now you have 30 seconds to back up 4 to 5 ft. away from the opener on the ceiling and towards the door and press and release slowly and firmly the button on your remote that you want to be programmed 3 to 4 times.  This should operate the door and the remote will then be programmed.

Is this remote (G1T-BX) compatible with A GeniPro 95-2IC System? I have a remote that has quit working after all these years.

Yes, the G1T-BX 1-Button Remote is compatible with Genie model PRO95-2IC.

I have a 1055tkv opener what remote do i need? this is a rental property and the remote was lost.

The G1T-BX 1-Button Remote is compatible with Genie model 1055.

I have a Genie Model# H4000A (1/2 HP). Will the G1T-BX remote work? I lost a current remote. Do I need to replace the working, existing remote also?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model H4000.  You can continue to use the existing remote you have.  However, if there is a chance that the lost remote could fall into the hands of someone else, you should clear your memory and reprogram all devices.  

1. To clear: Press and hold the learn code button on your motor until the red light stops flashing, all remotes will be cleared
2. To reprogram: Press and release the learn code button on your motor, then back up with the remote 4-6 feet and slowly press the desired remote button 4-5 times until the unit runs.  The remote is now programmed.  Repeat step 2 for any additional remotes.

how do i remove battery after opening case

To remove the battery from the G1T remote, you will need to use a small coin or wide flat blade screwdriver to remove the battery cover from the bottom of the remote.  Then, use light pressure of your thumb to press down on the battery and pull it out.

will this work with g1t-a

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the G1T-A.

Will this work with 1020L-390?

Yes, the G1T-BX 1-Button Remote is compatible with the model 1020L-390.

Will this work with Model PMX500IC/B?

Yes, the G1T-BX 1-Button Remote is compatible with the PMX500IC/B.

I have a genie opener Model 3053 Aladdin connect Is this remote compatible?

Yes, the G1T-BX 1-Button Remote is compatible with the model 3053.

Will this one work to replace model #gict390

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the GICT390 remote.

Need a remote for Genie Pro garage door opener Model CM 86001 CA. No idea when installed.

Yes, the G1T-BX is compatible with model CM8600IC/A.

Looking to replace a Genie GTAC-40 40.68 MHz. Can’t find this model in the replacement chart. What model of remote will work? The garage opener is a Genie Peo Stealth

Sorry, we no longer have a replacement for this remote, we would recommend a universal conversion kit for the country the unit is installed in.  In North America this would be the GIRUD-1T, but this is only for North America.

Which replacement 1 button operator is best for a Genie H4000A?

The G1T-BX is compatible with the H4000A.

I have an IS550/A model, is this remote compatible?

Yes, it is compatible.

I have a model 1024 will the one button remote work?

Yes, the G1T-BX is compatible with the model 1024.

Will this remote program my built in car remote?

Yes, this remote will work with Homelink or Car2U.

Will this remote work on a 1/2 H.P. MODEL ISA 1000 opener?

Yes, it will.

Will this work with model PMX500 IC/B? If it doesn't, is it returnable?

Yes, it will!

Will this work with 1/2 HP model H6000A , (receiver model ACSR3 )

Yes, it will!

Will this work with my Overhead Door 696CD/B? I have a Genie wireless keypad that works fine with the OHD unit.

Yes, it will!

Will this work with the model G1T-A?

Yes, it will!

Is it possible to program multiple G1T-BX remotes to the same opener? I’ve got an older model opener. I can get one remote programmed at a time.

Yes, it is! Most of our older Genie model garage door openers can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the powerhead up to seven.

You can also call 1-800-354-3643 for programming assistance.

Will this work with model #sd9005 ?

No, the G1T-BX will not work with the SD9005. You would need the GM3T-R Genie Master Remote.

Hi does this work to replace Genie remote control GICTD and garage door model 1/2 H.P. Model 3060L?

Yes, this G1T-BX remote will work with the 3060L model garage door opener.

how do i get cover off to change battery

The cover slides down from the front of the remote. See figure 2 on these instructions.

Will this remote work with 2020L model

Yes, it will!

The model on our opener is: PMX5001 C/B...we just purchased this home and it came with a small one button remote, but we need an additional one. Can’t read the number on the back of the remote - too small! Ours looks like your one button remote on-line, can you tell me if it will work with our model?

The PMX500IC/B model garage door opener is an Intellicode model. It will work with any of our current Genie remotes, as they are all Intellicode model remotes. If you are looking for a 1-Button remote, the G1T-BX would work great for you.

How big is it? I have a Genie Promax Chain Glide 2 opener. I ride a motorcycle and am looking for a small Genie remote I can carry on my keychain. What would you suggest?

The G1T-BX remote is about the same size as the key fobs for vehicles. If you are looking for one to put on a keychain, this G1T-BX remote would be what we recommend.

Will this work on a vintage model 200 opener?

No, it will not.

how do i change the battery?

1. Slide the Battery Cover off the front of the remote.
2. Slide the old battery toward the bottom of the remote and out.
3. Properly discard the old battery.
4. Slide a new (CR 2032 size) battery into position and slide the Cover back on.

how to replace battery for GIT-BX 1-Remote?

1. Slide the Battery Cover off the front of the remote.
2. Slide the old battery toward the bottom of the remote and out.
3. Properly discard the old battery.
4. Slide a new (CR 2032 size) battery into position and slide the Cover back on.

Does this model work with the Genie Promax

Yes, it will.

Will this remote work with my Genie Screw Drive SD5050 Model?

No, it will not. The SD5050 will work with the Genie Master Remote, model GM3T-R.

Will this work with model 2024?

Yes, it will.

Will this B1T GX-1 remote work for the CM 7500-S model?

No, it will not. The CM7500-S model would need the Genie Master Remote, GM3T-R.

I have a Genie remote control that is no longer working. Replaced the battery and still not working. The opener is a Genie Pro Stealth/Max. I believe the remote is damaged because it is loose where the battery is installed. The number I find on the remote control itself is TBSTG Type 1. Should the 1 button remote work with this opener. House was built in 2011 so would imagine the opener is about 10 years old. Thanks.

Yes, it will!

With this remote work with the 1/2 HP Screw drive model SD5050?

No, it will not. The SD5050 model garage door opener uses dip switches (fixed code technology). You would need the Genie Master Remote (GM3T-R).

Will this work on an older Genie model GT 90-1?

No, it will not. The GT90-1 remote can be replaced with the Genie Master Remote (GM3T-R).

Can I replace GICT390 remote to G1T-BX remote? I bought my house but they give me only 1 remote garage so I want copy 1 more, but I like G1T-BX remote. I had 1 GICT390 remote already.

Yes, the G1T-BX will replace the GICT390 remote.

What type of remote can I get to replace my genie model number ISL 950 / a

You can use the G1T-BX remote for the ISL950/A (or any Genie Intellicode model remote).

How do you remove/ reset prior codes. My remote now opens both garage doors. I only want it to open one. I have the G1T. Thanks!

What model is your garage door opener (in the garage)?

Will the remote work to program your homelink system in your car?

Yes, it will.

I just received my remote control, I want to program it, but I can't find the learn code button and learn code LED indicator, I have the model PCG700ML, I need your help, tanks

Locate the learn code button and indicator LED on the front of the powerhead (under force adjustment screws).

Will this work with model PRO99-IC?

Yes, it will!

will the G1T-BX 1-button remote work with the model 3062 KH garage door opener?

Yes, it will!

Will it work on a 2055

Yes, it will!

Will this work with model ISD990?

Yes, it will.

Will the G1T work with a 1995 Genie Intellicode opener with code switches?

No, the G1T remote will not work with a garage door opener that has Dip Switches. You would need the Genie Master Remote, (GM3T-R).

Will the G1T-BX 1-Button remote work with Genie Pro 98 Model GR9012? If not, do you have a remote that will work with that model?

No, it will not. You would need a Genie Master Remote (GM3T-R).

Will this work with the Genie Professional Line Model 2028

Yes, it will.

Will this work with a model 850?

Yes, it will.

I have a Genie 2028 with only one remote. Other one lost. Can I buy a new remote and be able to use both remotes?

Yes, you can purchase a new one and program it in so that the old remote and new remote will both work.

Will it work for a Genie GX9000 dip switch garage opener?

No, you would need the Genie Master Remote (GM3T-R).

will this remote work with a pro 1024 opener?

Yes, the G1T-BX remote will work with the Genie Pro 1024 garage door opener.

Will this remote works with Atoms Pro Skylink garage door opener?

No, they will not.

Will this work with model number IMS1000/A?

Yes, it will!

Witch one works with the genie pro 88

For the Genie Pro88 you would need the Genie Master Remote, GM3T-R.

I just bought a house and received no remote. The unit is a 1/2 HP H6000A with receiver model ACSR3. Is this the remote I need.

Yes, this remote will work with the H6000A model.

will this work for Model CM8600IC garage door opener

Yes, it will!

Does the G1T-BX work with model G4050 opener?

No, it does not. For the G4050 model garage door opener, you would need the Genie Master Remote model GM3T-R.

will this work with model IS550/A. Receiver model ACSR3G

Yes, it will!

Is the G1T-BX the same as the G1T model?

Yes, it is.

What are the dimensions? Will it work with model 2027.

This will work with the 2027 model garage door opener. The dimensions are 1" X 2 1/4".

I just bought a second remote of this model (for a new car) and when I paired it with the garage door opener, the old remote didn't work anymore. When I paired the old remote again, the new one no longer worked. Any advice?

It sounds like your model garage door opener can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the powerhead up to seven.

will this remote or which one will work for 1/2 hp screw drive model GXL9550CL I never had the remote from previous owner so no model number . Just have a one garage door . thank you

No, this remote will not work with the GXL9550CL. You would need the Genie Master Remote, model GM3T-R.

I have a Genie 2024 Professional. What remote do you recommend for a replacement.

You can use any of the current Genie remotes. They are all Intellicode models that will work with the 2024. If you only have one garage door opener, this G1T-BX would be a great choice.

Will this work with model 2028?

Yes, it will!

Will this work for model 1/2 HP PMH500IC/B Genie Pro Max? Also, I purchased DL2032 3V battery...is that ok?

Yes, this remote will work with the PMX500IC/B model garage door opener. This remote comes with the battery, but the DL2032 will be a good replacement battery for it.

I live in California and don't know if I have anything that has a battery backup. I'd like to order The G1 TB X key chain remote for my genie model 1028. Will it work?

The G1T-BX remote will work with the 1028 model garage door opener.

I bought a two pack of the single button remotes and have no trouble programming just one but when I program the other it works fine but it resets/cancels the other. How do I program both to open the same door??

It sounds like you have a garage door opener that can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. (this is why you keep knocking the new one out). To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the powerhead up to seven. Please keep in mind if you do this, you will need to program in the two new ones, plus any old ones that you are still using.

I just bought a house that has this remote. However, I’d like to change the code/frequency so if the previous owners had programmed their car to use the existing code then it’ll no longer work. Is there a way to change the code that the remote is using without having to buy new remotes? If so, are there instructions on how to do that? Thanks

Yes, you can clear the receiver in the garage door opener. When you do this all the wireless devices that have ever been programmed to this garage door opener will no longer work. You will have to reprogram each remote (or other wireless devices) that you still have back into the garage door opener. But you do not have to replace them. The instructions for clearing the memory of the garage door opener varies depending on the model. You can view the manuals for Genie garage door opener models.

I have a Genie Model CM76001C Opener unit, 1/3 HP e/w Receiver Model ACSRG It's working with a Model ACSGT Type 1 Single button Remote. Which is now defective) ?? What is the proper replacement for my Remote??

The G1T-BX remote will work with the CM7600IC model garage door opener.

I have a genie Model AT90 remote I want another remote in case I lose this one or it quits working. Freq is 390. Will the G1T-BX 1-Button work?

No, the G1T-BX will not work with the AT90 remote. You would need the Genie Master Remote, GM3T-R.

Is this the same as the G1T-A version?

Yes, it is.

will it work with a genie pro 88

No, this will not work with the Genie Pro 88 model. You would need the Genie Master Remote (GM3T-R) to work with the Pro 88 since it has dipswitches.

Will this work with the SilentMax 750? Looking for a few additional remotes and don’t need the 3 button.

Yes, it will!

Will the GXT-BX1 work with model 4062?

Yes, it will!

Will it work with model 4053

Yes, it will!

Will this replace Genie - model# AT90? (FCC ID: B8Q GT50)

No, it will not. You would need the Genie Master Remote, GM3T-R to replace the AT90 remote.

Will this work with a Model ISD1000 opener?

Yes! The G1T-BX remote will work with the ISD1000 model garage door opener.

Will this work with PMX300/IC/B?

Yes, it will!

Will this remote work with opener model PMX500ic/b ? And if not do you offer one that will ?

Yes! The G1T-BX remote will work with the PMX500IC/B model.

Will this work with a Medallion series opener manufactured Dec 1995? The opener has dip switches. If not, is there a keychain remote that will?

The G1T-BX will not work with the dip switch style garage door openers. We have the Genie Master Remote (GM3T-R) that will work. It is not a keychain style remote, but at this time it is the only one we have that will work with the dip switch models.

will this model replace an old opener AT85P?

No, the G1T-BX will not work to replace the AT85P. You would need the Genie Master Remote, model GM3T-R.

Will this work with Model PMX500IC/B

Yes, the G1T-BX remote will work with the PMX500IC/B model garage door opener.

I need to replace an old genie 912. Will this work?

No, it will not. You would need the Genie Master Remote, GM3T-R.

What is the size of the product?

The dimensions of the G1T-BX are 2" wide x 3 " tall x 1.25" deep.

Will this work with Chamberlin/Liftmaster model# 8355W

No, it will not.

Do you have a remote that will work with an old 1/2 horse G5000 opener?

Yes, the Genie Master Remote model GM3T-R will work with the G5000.

Is this compatible with model PMX500IB/C

Yes, it is!

I followed the instructions and after several tries got it to “learn” (the overhead light on the motor blinked). But then the remote would not open the door. I started over thinking maybe I didn’t do it quite right and after multiple (52) tries, I can’t get it to “learn” again. I’ve replaced the battery think that could be it but no luck. Is there something special you need to do for a chamberlain whisper deluxe with the purple learn button?

This remote will not work with a Chamberlain garage door opener.

Will this remote work with a CM 7500-S model?

No, it will not. You would need the Genie Master Remote, model GM3T-R.

will G1T-BX work with ACSR3G? if not, which # will?

This will work.

Will it work in place of ACSGT type 1 remote?

Yes, it will!

Will it work with a Genie Model 1028?

Yes, it will!

Can I use this remote on model GT90-1 (one garage door) ? If not, what kind of remote can I use for GT90-1?

You will need the Genie Master Remote, GM3T-R to replace the GT90-1.

Will it work with Model 1024 Genie Pro?

Yes, it will. 

i have an old remote model GICT390. Will this one work in its place?

Yes, this will. 

I need a new remote for my old Genie door opener. The model is GT90-1. Do you have one that will work.

You can use the Genie Master Remote, model GM3T-R to replace the GT90-1.  

will this work on #CM86001C1A?

Yes, it will! 

Will this work with a 1/2 H.P. ISL950/A

Yes, it will! 

will this work for a model 1024?

Yes, it will. 

Will the G1T-BX 1-Button Remote work to replace model # 696CD-B?

Yes, it will. 

Will this work with Model 2060L-07?

Yes, it will! 

Will this work with SD5050 models?

No, it will not. You would need the Genie Master Remote GM3T-R for the SD5050 model. 

I have a model2060L how do I program it to my opener there is no learn button or DIP switches

Hi! Page 8 and 9 on this manual will show you about programming the G1T-BX remote to the model 2060L. The learn code button will be under the light bulb cover of your garage door opener. 

I have a Genie SilentMax 1000 (belt chain drive) and need a replacement remote. The button on my car mirror broke and I can't locate my remote (if I had one). Which one-button remote should I order?

You can use this one, the G1T-BX. 

Will it work with Reliag model 850?

Yes, it will. 

Will this work with 1/2hp Model4000-07/m

Yes, it will. 

Will this remote work for the Genie PCG-650

Yes, it will. 

i have currently a gict 390. will this on work/

Yes, it will. 

Will a G1T BX 1 button work with a 1/2 H.P. Model H6000A?

Yes, it will! 

Will this work with the 3060L-07/m

Yes, it will! 

Will this work in place of a GICT390 remote

Yes, it will!

Will it work with PMX5001C/B? If not, what will?

Yes, this will work with the PMX500IC/B. 

Will it work with the 3060L-07 model and if so, will the old remote still work as well?

Yes, it will work on the 3060L-07 model. The old remote will still continue to work with the new remote. You can program up to at least 7 wireless devices to Genie models. 

Will a G1T BX 1 button work with a 1/2 H.P. Model IS550/A?

Yes, it will! 

Will it work with model number 1024

Yes, the G1T-BX will work with the 1024 model. 

Will it work with 1/2 hp model H4000 a

Yes it will! 

I have a G5050. It's an older model with code switches. Will this work?

No this will not. You need a Genie Master Remote, GM3T-R. 

Does this remote work with your H6000 07/M opener?

Yes it does! 

will this work with 1/2 model GCG350L

Yes it will! 

Will this remote replace ACSCTG Type3 old model?

Yes it will! 

will this remote work with my CM7600ic/a opener?

Yes this remote will work with the CM7600IC/A model garage door opener. 

Will this work for a genie 2020L?

Yes! This G1T-BX remote will work with the 2020L model garage door opener. 

Will this work with a 1/2 H.P. Model IS920/A model?

Yes it will! 

will this remote work with the 1028 model

Yes it will!

Will this work for Genie model 3055?

Yes it will! 

Will this work with model number ACSCTG Type 1?

Yes it will! 

Will this opener work with my genie intellicode opener model number ACSCTG Type 1?

Yes it will! 

Can you tell me which one button remote that would replace my original genie remote model G3T-A? Thanks!

Model G1T-BX 1-Button Remote is a compatible replacement for the model G3T-A.

Will this work for the IS-550A?

Yes it will!

Will this work with the 2060L Model?

Yes, the G1T-BX will work with the 2060L model. 

Is this a series 2 remote?

Yes it is!

Will this work on my PRO95IC/A model?

Yes, the G1T-BX 1-Button Remote is compatible with the Pro95IC/A.

Is the G1T-BX1 compatible with a Genie Blue Max garage door opener? If not, which Genie opener is compatible with the Blue Max ?

No, you would need the GM3T-R.

Does this work for an Intellicode GCG350L?

Yes, the G1T-BX 1-Button Remote will work with the GCG350L.

Does this work with genie model 2055?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 2055.

my genie garage door opener is model 1035 the handheld opener says G1T-A on it will the G1T-BX 1 replace it??? thanks

Yes, the G1T-BX 1-Button Remote will work with your Genie model 1035 garage door opener.

Will this work on an is900a

Yes, the G1T-BX 1-Button Remote will work with your Genei model IS900A garage door opener.

Will this remote work on my genie model 1035?

Yes, the G1T-BX 1-Button Remote is compatible with the Genie model 1035.

Is the GiT-BX1 Button remote compatible with a Genie Model 1035 opener?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 1035.

I received it. How do I pair it with my opener? Or should it simply work right out of the box (because that's definitely not the case). Thanks! Matt

You will need to program the remote to your unit. View the instructions here. You will just need to follow them depending on which model opener you have. 
If you still need assistance, you can also contact our customer service at 1-800-354-3643 for programming assistance.

will this remote work with MODEL 1055

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 1055.

Is this the correct remote (G1T-BX) for Genie Excelerator Model: 1SD995 Mf Date 2003

Yes, the G1T-BX 1-Button Remote is compatible with Genie model ISD995.

My installer left no paperwork for genie 1035. Which remote do I need? Need 2nd one.

Yes, you can use the G1T-BX 1-Button Remote with your Genie model 1035 garage door opener. You can use any of our current remotes with your garage door opener.

Please confirm the remote I should purchase that is compatible with the Genie Model 3053 Garage door opener. Thank you

Yes the G1T-BX 1-Button Remote will work with your Genie model 3053 garage door opener. Any of the remotes we currently offer on our website will work with your opener.

Is this compatible with Genie model 1155 garage opener?

Yes the G1T-BX 1-Button Remote will work with your Genie model 1155 garage door opener.

Will this work with Genie H6000A?

Yes, the G1T-BX 1-Button Remote will work with your Genie model H6000A garage door opener.

Will this remote work with model 1035?

Yes, the G1T-BX 1-Button Remote will work with your Genie model 1035 garage door opener.

What year will this remote work for? Ours is model #3060L/M Purchased 2008/2009.

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 3060L/M.

Have Genie Intellicode Screw Drive opener series ISL I think, with Series II Electronics. Remote transmitter - GIC-90-2 has failed. Replaced battery and re-programed but Remote works once or twice then fails. Receiver indicator light recognizes first couple sends then nothing. Wireless Keypad works every time. The model # on back of remote - ACSGT Type 2. Question = Do you think the Remote Transmitter is failing to progress to new intellicode? Which new single button style will work with this opener?

Hello. If your keypad is working everytime then that would point towards a remote issue. You can use any of our current remotes with your garage door opener.

will this remote work with the H6000A?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model H6000A.

I have model 1028 and need a new remote. Which one should I get?

Hello. You can use any of our current remotes with your Geine model 1028 garage door opener.

Which current remote can replace an ACSGT Type 1 remote?

If the remote ACSCTG works with your opener, then any of our current remotes will also work.

Does this work withPMX500IC opener?

Yes, the G1T-BX 1-Button Remote is compatible with the Genie model PMX500IC.

will this remote replace the genie gt912 remote?

No, the G1T is not compatible, for a GT912 remote replacement you would need the GM3T remote.

Will this model replace a GIT-A also?

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the G1T-A.

we need a second remote for opening our garage. Our current remote is G1T-A. is this G1T-BX model compatible? Could we add it as a second remote?

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the Genie G1T-A remote.

Which remote can I purchase to replace old broken remote for ACSR1 1/2 H.P. Model PCG700ML

Yes, the G1T-BX 1-Button Remote is compatible with Genie model PCG700ML.

Do you have a deal that includes two in a pack G1T-BX 1-Button Remote?

Yes, G1T-BX 2 pack.

What is the model number for a one button remote that is compatible with Model 7035 Garage Door Opener?

The G1T-BX 1-Button Remote is compatible with Genie model 7035.

I have a genie aacsr3g model will this hand unit would work? ( receiver model ACSR3G )

Yes, the G1T-BX 1-Button Remote is compatible with the Genie ACSR3G model.

I need a G1T-A

The G1T-BX 1-Button Remote is a compatible replacement for the G1T-A.

WILL THIS WORK WITH ACSRG

Yes, the G1T-BX 1-Button Remote is compatible with the ACSRG.

We have a genie garage door 1035. Will this model open our garage?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 1035.

I could not find a part number for the remote that came with opener in the manual. On the back of the remote are stamped the following numbers and letters: D:3422SW:V2.0.7 and Model GIT-A. I want to buy a second remote and want to make sure I order the right one. Thank you

Yes, the G1T-BX 1-Button Remote is compatible replacement for the GIT-A.

Is the G1T-BX 1-Button Remote compatible with the Genie Professional Model 2028 door opener?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 2028.

will this work on modle 2128

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 2128.

Will this replace the GIC901 ? I have no idea how old it is but it's pretty old! We can't even figure out how to get it open!

Yes, the G1T-BX 1-Button Remote is a compatible replacement for the GIC90-1.

can it be programed with homelink in vehicles

Yes, the G1T-BX 1-Button Remote is compatible for programming a Homelink device.

Will this remote work with a Model 1028 opener?

Yes, the G1T-BX 1-Button Remote is compatible with the Genie model 1028.

I just moved into a house with a Genie Model 1035 garage door opener. I need a remote for it. Is this the right one for me to order?

Yes, the G1T-BX 1-Button Remote is compatible with Genie model 1035.

I am looking for remote for door opener 1/2 hp model CM8600IC/A. What remote can work with this model? Tank you

Yes, the G1T-BX 1-Button Remote is compatible with your Genie Model CM8600IC/A..

Is this remote control compatible with my garage door GENIE MODEL IS550/A and the receiver model ACSR3G Thank you

Yes, the G1T-BX 1-Button Remote is compatible with Genie model IS550/A.

I have a Professional Line reliag 650 will this replace it and is it easy to program?

Yes, the G1T-BX 1-Button Remote is compatible with the ReliaG 650 and it is easy to program.

To program the remotes, you will need to press and hold the square PRG/SET button on the power head until you see a blue light, then release the button. When you release a purple blinking, light comes on. Step away from the unit a few feet, and slowly and firmly press and release the button on your handheld remote that you wish to program 3-4 times. The door should operate. When this happens, your remote is programmed.

How to change battery

You can use a coin or flat blade screwdriver to push the battery cover down on the front of the remote.  The G1T remote uses a CR2032 battery and the positive side will go up towards the metal bracket.  Then the battery cover can be put back.