Free Shipping On All U.S. Orders $14.99 +
{"id":1701205868659,"title":"ACSCTG Type 1 Replacement 1-Button Remote","handle":"acsctg-type-1-replacement-1-button-remote","description":"\u003cp\u003eThis new Genie 1-Button Intellicode remote replaces the discontinued ACSCTG Type 1 \u003cspan\u003eIntellicode®\u003c\/span\u003e\u003cspan\u003e remote. The old tombstone style classic remote was used for many model garage door openers over the years by Genie. \u003c\/span\u003e The old remote model was also known as a G1T-1 or G2T-1. The new one-button garage door opener replacement remote is easy to program and has a sleek compact design. Perfect for adding to a keychain or clipping to the visor in your vehicle.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplace your old Genie garage door opener remote \u003cspan\u003eACSCTG transmitter with this updated version\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasily programs and is compatible with all Intellicode® model Genie garage door openers- instructions are included\u003c\/li\u003e\n\u003cli\u003eSleek compact design can be added to a keychain or clip to your visor (plus the visor clip is included)\u003c\/li\u003e\n\u003cli\u003eGenuine Genie Intellicode Replacement Remote\u003c\/li\u003e\n\u003cli\u003eOld ACSCTG remote was known by other terms that included B8QACSCT, B8Q315390T, TBSTG Type1, Tombstone, Intellicode remote\u003c\/li\u003e\n\u003cli\u003eThis 1-Button remote can also replace the GICTD-1, GICT390-1, GIFT390-1, GIFTD-1 or GIC90-1 style remotes\u003c\/li\u003e\n\u003cli\u003eNew remote uses a CR2032 coin cell battery- which is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\"\u003e \u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCalifornia\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eProduct Support\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.geniecompany.com\/data\/products\/accessories\/manuals\/legacy\/33069R_1_Btn%20IC1_3307631029.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e  Genie Intellicode remote ACSCTG Type 1 Manual \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eGenie Intellicode Garage Door Opener Remote Programming Instructions\u003c\/strong\u003e- For ACSCTG Type 1 Replacement 1-Button Remote - G1T-BX\u003c\/h3\u003e\n\u003cp\u003e(for PDF version click here \u003ca href=\"https:\/\/www.geniecompany.com\/data\/products\/accessories\/manuals\/1-btn-remote_eng-spa.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThis Genie Intellicode Remote comes from the factory designed to operate any Genie® Intellicode® type garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA. For use with Learn Code Button equipped Openers (1995 to Present) —\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the battery’s protective film by pulling it out the bottom of the remote.\u003c\/li\u003e\n\u003cli\u003eLocate the Learn Code Button and Learn Code Indicator LED on your opener’s powerhead Fig. 1A below (See your owner’s manual).\u003c\/li\u003e\n\u003cli\u003ePress and release the Learn Code Button—the Red Learn Code LED will blink rapidly.\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button, —the Learn Code LED will stay on (stops blinking).\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button again—the Learn Code LED will turn off.\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button again—the Door Opener will run.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTHE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Figure_1A_medium.jpg?v=1540921401\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFor use with Program\/Set Button equipped Openers (2010 to Present)—\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the battery’s protective ­film by pulling it out the bottom of the remote.\u003c\/li\u003e\n\u003cli\u003eLocate the Program\/Set Button and Programming Indicator LEDs on your opener’s powerhead Fig. 1B below (See your owner’s manual).\u003c\/li\u003e\n\u003cli\u003ePress the Program\/Set button until the round LED will turn blue.\u003c\/li\u003e\n\u003cli\u003eRelease the Program\/Set button—the long LED will blink purple.\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button, —the long LED will turn steady purple (stops blinking).\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button again—both LEDs will blink blue and turn off.\u003c\/li\u003e\n\u003cli\u003ePress and release the remote button again—the Door Opener will run.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTHE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Figure_1B_medium.jpg?v=1540921501\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e","published_at":"2018-10-11T10:28:31-04:00","created_at":"2018-10-09T13:18:31-04:00","vendor":"The Genie Company","type":"Remotes","tags":["ACSCTG","One Button Remote","Remotes","Replacement Remote"],"price":3499,"price_min":3499,"price_max":3499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16834949251187,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"38501R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ACSCTG Type 1 Replacement 1-Button Remote","public_title":null,"options":["Default Title"],"price":3499,"weight":227,"compare_at_price":null,"inventory_quantity":943,"inventory_management":"shopify","inventory_policy":"continue","barcode":"050049020200"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/git_1_ACSRCTGTYPE1_MASHUP.jpg?v=1555443392","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/1button_remote_800x_92211994-7f19-4323-8d7e-4a6bae22f694.jpg?v=1555443414","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/git_1_ACSRCTGTYPE1_Replacement.jpg?v=1555443430","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/G1Tremote_a4d29445-bd3b-4f7a-981e-154932c4bf6b.jpg?v=1555443453"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/git_1_ACSRCTGTYPE1_MASHUP.jpg?v=1555443392","options":["Title"],"media":[{"alt":"Genie ACSCTG Type 1 Replacement 1-Button garage door opener Remote ","id":1342514200691,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/git_1_ACSRCTGTYPE1_MASHUP.jpg?v=1569284617"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/git_1_ACSRCTGTYPE1_MASHUP.jpg?v=1569284617","width":1024},{"alt":"ACSCTG Type 1 Replacement 1-Button handheld garage door opener Remote","id":1342517969011,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/1button_remote_800x_92211994-7f19-4323-8d7e-4a6bae22f694.jpg?v=1569284618"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/1button_remote_800x_92211994-7f19-4323-8d7e-4a6bae22f694.jpg?v=1569284618","width":800},{"alt":"ACSCTG Type 1 Replacement 1-Button Remote for Genie garage door openers ","id":1342518493299,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/git_1_ACSRCTGTYPE1_Replacement.jpg?v=1569284618"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/git_1_ACSRCTGTYPE1_Replacement.jpg?v=1569284618","width":1024},{"alt":"Genie ACSCTG Type 1 Replacement 1-Button Remote ","id":1342514757747,"position":4,"preview_image":{"aspect_ratio":0.917,"height":872,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/G1Tremote_a4d29445-bd3b-4f7a-981e-154932c4bf6b.jpg?v=1569284617"},"aspect_ratio":0.917,"height":872,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/G1Tremote_a4d29445-bd3b-4f7a-981e-154932c4bf6b.jpg?v=1569284617","width":800}],"content":"\u003cp\u003eThis new Genie 1-Button Intellicode remote replaces the discontinued ACSCTG Type 1 \u003cspan\u003eIntellicode®\u003c\/span\u003e\u003cspan\u003e remote. The old tombstone style classic remote was used for many model garage door openers over the years by Genie. \u003c\/span\u003e The old remote model was also known as a G1T-1 or G2T-1. The new one-button garage door opener replacement remote is easy to program and has a sleek compact design. Perfect for adding to a keychain or clipping to the visor in your vehicle.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplace your old Genie garage door opener remote \u003cspan\u003eACSCTG transmitter with this updated version\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasily programs and is compatible with all Intellicode® model Genie garage door openers- instructions are included\u003c\/li\u003e\n\u003cli\u003eSleek compact design can be added to a keychain or clip to your visor (plus the visor clip is included)\u003c\/li\u003e\n\u003cli\u003eGenuine Genie Intellicode Replacement Remote\u003c\/li\u003e\n\u003cli\u003eOld ACSCTG remote was known by other terms that included B8QACSCT, B8Q315390T, TBSTG Type1, Tombstone, Intellicode remote\u003c\/li\u003e\n\u003cli\u003eThis 1-Button remote can also replace the GICTD-1, GICT390-1, GIFT390-1, GIFTD-1 or GIC90-1 style remotes\u003c\/li\u003e\n\u003cli\u003eNew remote uses a CR2032 coin cell battery- which is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\"\u003e \u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCalifornia\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eProduct Support\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.geniecompany.com\/data\/products\/accessories\/manuals\/legacy\/33069R_1_Btn%20IC1_3307631029.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e  Genie Intellicode remote ACSCTG Type 1 Manual \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eGenie Intellicode Garage Door Opener Remote Programming Instructions\u003c\/strong\u003e- For ACSCTG Type 1 Replacement 1-Button Remote - G1T-BX\u003c\/h3\u003e\n\u003cp\u003e(for PDF version click here \u003ca href=\"https:\/\/www.geniecompany.com\/data\/products\/accessories\/manuals\/1-btn-remote_eng-spa.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThis Genie Intellicode Remote comes from the factory designed to operate any Genie® Intellicode® type garage door opener.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA. For use with Learn Code Button equipped Openers (1995 to Present) —\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the battery’s protective film by pulling it out the bottom of the remote.\u003c\/li\u003e\n\u003cli\u003eLocate the Learn Code Button and Learn Code Indicator LED on your opener’s powerhead Fig. 1A below (See your owner’s manual).\u003c\/li\u003e\n\u003cli\u003ePress and release the Learn Code Button—the Red Learn Code LED will blink rapidly.\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button, —the Learn Code LED will stay on (stops blinking).\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button again—the Learn Code LED will turn off.\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button again—the Door Opener will run.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTHE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Figure_1A_medium.jpg?v=1540921401\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFor use with Program\/Set Button equipped Openers (2010 to Present)—\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the battery’s protective ­film by pulling it out the bottom of the remote.\u003c\/li\u003e\n\u003cli\u003eLocate the Program\/Set Button and Programming Indicator LEDs on your opener’s powerhead Fig. 1B below (See your owner’s manual).\u003c\/li\u003e\n\u003cli\u003ePress the Program\/Set button until the round LED will turn blue.\u003c\/li\u003e\n\u003cli\u003eRelease the Program\/Set button—the long LED will blink purple.\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button, —the long LED will turn steady purple (stops blinking).\u003c\/li\u003e\n\u003cli\u003ePress and release the Remote Button again—both LEDs will blink blue and turn off.\u003c\/li\u003e\n\u003cli\u003ePress and release the remote button again—the Door Opener will run.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTHE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Figure_1B_medium.jpg?v=1540921501\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- \/TABS --\u003e"}

ACSCTG Type 1 Replacement 1-Button Remote

Product Description
$34.99
Maximum quantity available reached.

This new Genie 1-Button Intellicode remote replaces the discontinued ACSCTG Type 1 Intellicode® remote. The old tombstone style classic remote was used for many model garage door openers over the years by Genie.  The old remote model was also known as a G1T-1 or G2T-1. The new one-button garage door opener replacement remote is easy to program and has a sleek compact design. Perfect for adding to a keychain or clipping to the visor in your vehicle.  

  • Replace your old Genie garage door opener remote ACSCTG transmitter with this updated version
  • Easily programs and is compatible with all Intellicode® model Genie garage door openers- instructions are included
  • Sleek compact design can be added to a keychain or clip to your visor (plus the visor clip is included)
  • Genuine Genie Intellicode Replacement Remote
  • Old ACSCTG remote was known by other terms that included B8QACSCT, B8Q315390T, TBSTG Type1, Tombstone, Intellicode remote
  • This 1-Button remote can also replace the GICTD-1, GICT390-1, GIFT390-1, GIFTD-1 or GIC90-1 style remotes
  • New remote uses a CR2032 coin cell battery- which is included

 California Residents: Proposition 65 WARNING

Sku: 38501R

  Genie Intellicode remote ACSCTG Type 1 Manual 

 

Genie Intellicode Garage Door Opener Remote Programming Instructions- For ACSCTG Type 1 Replacement 1-Button Remote - G1T-BX

(for PDF version click here )

This Genie Intellicode Remote comes from the factory designed to operate any Genie® Intellicode® type garage door opener.

A. For use with Learn Code Button equipped Openers (1995 to Present) —

  1. Remove the battery’s protective film by pulling it out the bottom of the remote.
  2. Locate the Learn Code Button and Learn Code Indicator LED on your opener’s powerhead Fig. 1A below (See your owner’s manual).
  3. Press and release the Learn Code Button—the Red Learn Code LED will blink rapidly.
  4. Press and release the Remote Button, —the Learn Code LED will stay on (stops blinking).
  5. Press and release the Remote Button again—the Learn Code LED will turn off.
  6. Press and release the Remote Button again—the Door Opener will run.

THE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.

 

B. For use with Program/Set Button equipped Openers (2010 to Present)—

  1. Remove the battery’s protective ­film by pulling it out the bottom of the remote.
  2. Locate the Program/Set Button and Programming Indicator LEDs on your opener’s powerhead Fig. 1B below (See your owner’s manual).
  3. Press the Program/Set button until the round LED will turn blue.
  4. Release the Program/Set button—the long LED will blink purple.
  5. Press and release the Remote Button, —the long LED will turn steady purple (stops blinking).
  6. Press and release the Remote Button again—both LEDs will blink blue and turn off.
  7. Press and release the remote button again—the Door Opener will run.

THE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.


     

    Questions & Answers

    Ask a Question
    • Will this remote work with the GCG350L model garage door opener??

      Yes, it will. 

    • will it work with a model1S550/A

      Yes, it will! 

    • Which remote replaces model ( FCC. ID BBQACSCT

      You can use this one button remote to replace the BBQACSCT. 

    • will this remote work with the GXL9550 model garage door opener

      No, it is not. You would need the Genie Master Remote, model GM3T-R. 

    • will this work with the B8Q ACSGT

      Yes, it will. 

    • Will this work for Genie Excelerator ISD 1000 model? Thanks.

      Yes, it will!

    • I have a learn button garage door opener. When I program one remote, and I try to program the next one, it erases the first remote that I just programmed. I don't know how to get both remotes programmed

      You most likely have a garage door opener that can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the power head up to seven. If you need assistance, you can also contact Genie customer service for support at 1-800-354-3643.   

    • Will this remote replace a G3T-A?

      Yes, it will! 

    • I'm sorry my last question was the wrong remote. Will this one replace a GICT390? I see the product describes it will replace a GICT390-1 just not sure if that's the same remote..thank you

      No problem! Yes, this remote will replace the GICT390 remote. 

    • Will this work on the old ACSR3?

      Yes, it will. 

    • My old remotes no longer function. I have 1/2 HP Model H6000A Genie Intellicode. I need 2 remotes. Can you tell me the type to get?

      You can get any of the remotes we have right no, they are all Intellicode models. If you just have one garage door, I would recommend this G1T-BX remote. 

    • Will this remote work for a Genie - current remote identified as: G1CT 390. FCC Part 15.

      Yes, this will work to replace the GICT390 remote. 

    • Will this remote replace a ACSCTG Type 3, three button remote? Thanks! KJ

      Yes, it will. It only has one button (instead of three). So if you only need to operate one garage door, this would be perfect. 

    • does any remote work with the 2060L system

      Any of the Intellicode remotes will work with the 2060L. 

    • Does this unit replace model PMX500IC/B, receiver model ACSR1G Series II controller. Many thanks.

      Yes, this will work with the PMX500IC/B.

    • will it work w/ pmx500IC/B

      Yes, it will!

    • Will this work with the model Acsr1g?

      Yes, it will.

    • will this work w/isl950/a

      Yes, it will!

    • Will this work with model H6000?

      Yes, it will!

    • Will this work with fcc Id:b8qacsct. 1/2 H.P. Model H 4000A a stag type 1

      Yes, it will!

    • Will this work with sd9500?

      No, it will not. You would need the Genie Master Remote, model GM3T-R.

    • I only want (1) garage door opener

      This remote only has one button.

    • Does the one button remote work with PCG500ML

      Yes, it does!

    • Will it work with PMX 500-XL opener?

      Yes, it will!

    • WILL MODEL # CM86001c/a work with this model

      Yes, it will!

    • Ours is really old - Model GT912 FCC ID: 88Q GT50. And there is a number engraved - 1896. Used a 9V battery. Inside CTS and 206-121. Bar has 12 slots and all seem to be up. Please let me know if the new model will work. Thanks.

      You would need the Genie Master Remote. Model GM3T-R. It will replace the GT9-12 remote.

    • will this work with a genie pro82 1/3 hp screw drive opener

      No, this will not. For the Pro82 model garage door opener, you would need the Genie Master remote, model GM3T-R.

    • will this remote work with an older model #2060L?

      Yes, it will!

    • Will this work with the CM8600IC/A with a ACSR3 receiver?

      Yes, it will!

    • I have codedodger model ACSCTO. Is there a replacement remote?

      Yes, this G1T-BX remote will replace it.

    • Will it work on model 2060L-07/m

      Yes, it will!

    • How do I program an ASCGTG Type 1 with the garage door opener.

      You can find the programming instructions here... https://www.geniecompany.com/data/products/accessories/manuals/1-btn-remote_eng-spa.pdf
      If you need additional assistance you can also contact our customer service support at 1-800-354-3643.

    • will this remote work with model CM86001C/A

      Yes, it will!

    • Will this work with Model PRO99-IC

      Yes, it will!

    • Will this work in place of number ACSGT type 1. Genie INTELLICODE garage door opener

      Yes, it will!

    • Will this work with Model SD9000?

      No, it will not. You will need the Genie Master Remote, model GM3T-R.

    • Will this remote work with 1/2 HP Model 2020L Genie?

      Yes, it will.

    • Will this work with Aladdin 1020L-390

      Yes, it will!

    • Will this remote work with IS920/A

      Yes, it will.

    • does the opener motor require an antenna ?

      The garage door opener powerhead will have an antenna.

    • Will this work with ACSCTG Type 3?

      Yes, it will.

    • Will this remote work on an sp 129 screw model opener

      No, this will not work on the SP 129. This remote will only work on Genie Intellicode model garage door openers, not the dip switch style.

    • Will this remote work with H4000A model.

      Yes, it will!

    • Will the ACSCTG Type 1 Replacement 1-Button Remote work with the 1/2 H.P. MODEL PMX500IC/B operator?

      Yes, it will!

    • Lost my original remote, will this work for the Cryptar II digital control

      No, this will not work with the Cryptar II.

    • We have a Genie Pro Screw Drive Model CM8600-XL/M for which the remote has been lost. Is this the correct replacement opener?

      Yes, it is.

    • Will this remote work for the IS900B? My old remote is model# ACSGT type 2.

      Yes, it will!

    • will the replacement 1 button remote work? I have a genie 912.

      No, to replace the Genie 912 remote you would need the Genie Master Remote. GM3T-R.

    • what is the model number of this new remote?

      The 1-Button remote model is G1T-BX.

    • Will this remote work with a H4000-07/M?

      Yes, it will.

    • does this replace genie promax2 model PCG500ML

      This remote will work with the Genie ProMax2 model PCG500ML.

    • Will it work with GS 210?

      No, it will not.

    • Will this remote work with the Genie Model 2020L FCC ID: B8Q315390R1?

      Yes, it will.

    • Will this remote work with Genie model IMS 1000/A?

      Yes, it will!

    • Will this remote work for Genie Excellerator Model #ISD995?

      Yes, it will!

    • will this work with model H8000-7

      Yes, it will!

    • does genie make a one button remote for a model 3055 door opener. If so what is the model number.

      Yes, we do! It is the G1T-BX, part number 38501R.

    • Will the older remotes work with model 7055?

      This would depend on what model the remote is. What model remote do you have?

    • What battery does the old model use?

      The older style remotes used either the CR2032 (coin-shaped battery) or an A23 battery (depending on the model).

    • I have a Genie Screw Pro residential opener (likely installed in the 90's) I need new remotes now. The model # on the back of my remote is ACSGT Type 1 What is the replacement for this? Thank you

      You can use this current one button Genie remote.

    • Will this work with a model ISD990?

      Yes, it will!

    • I bought this home and the previous owners left no instructions for anything. My remote has died and according to the number listed this one will be a replacement. When programming do you need anything from the opener unit like instructions, codes etc or will the programming instructions with this replacement handle everything.

      The instructions with this replacement remote will cover everything you need to program it to your garage door opener.

    • I need a remote garage door opener that will open a model H2000C 1/2 HP. will this work?

      Yes, it is!

    • will the remote work on my G2500 model?

      No, it will not. You would need the Genie Master Remote, GM3T-R.

    • Will this remote with a 404 Green Monster garage door opener? If not is there one that will?

      No, it will not. We do not have one that will.

    • Does it work for PCG650?

      Yes, it does!

    • Will this work with a Model 404 garage door opener?

      No, it will not.

    • Will this work with model Genie Pro 82?

      No, it will not. You would need the Genie Master Remote (GM3T-R).

    • Will this remote work with Receiver ACSR1G, Model PMX500ICBGenie Pro Max?

      Yes, it will!

    • My opener just shows Genie Pro on the outside. Will this replacement remote work with it?

      The model number should be under the light bulb cover. We would need the model number or some other information to determine this. You can also contact Genie customer service at 1-800-354-3643.

    • Will this remote work on a G5050 model. The previous owner of my new home did not leave or have a remote?

      No this will not work with the G5050. You will need the Genie Master Remote (GM3T-R).

    • Will this remote work with an Model ISD 990?

      Yes, it will!

    • Does this remote work for the GCG350ML model

      Yes, it does!

    • Will this work with the B8QGR912 model

      No, it will not. You need the Genie Master Remote (GM3T-R).

    • I have a very old Genie 200 garage door opener. The remote has been lost. Will this remote work with it? I have no other remote to program it with.

      No, we no longer have a remote to work with the model 200.

    • Do you have a remote for model 4040l

      You can use any of our current Genie remotes, they are all Intellicode models which will work with the 4040L.

    • my remote is ACSCTG type 1. what remote should I order to replace it?

      You can replace it with this G1T one button remote.

    • Will this work with the 2060L Model?

      Yes, it will!

    • Will this work with acsgt

      Yes, it will!

    • Will this remote replace model ACSCTG Type 3?

      Yes, it will!

    • i have a genie 1/2 hp model IMS 1000/A and lost the remote and want to replace what remote do I order

      You can use this 1 button remote or any of our current Genie remotes, they are all Intellicode model remotes.

    • What battery does the old ACSCTG Type 1 use?

      It takes the CR2032 3V Coin Cell Battery.

    • What replacement remote do I use for Genie Pro GPS1200IC

      You can use this one button remote or any of our current Genie Intellicode model remotes.

    • Will this remote work with model SP 99 garage door opener

      No, it will not. You would need the Genie Master Remote, (GM3T-R) for the SP 99 model.

    • will this work with the B8Q ACSCT

      Yes, it will.

    • Will this remote work with H Dash 4000 Dash 07 models

      Yes, it will.

    • Will this work with model H4000-07?

      Yes, it will!

    • will it work with a model acsgt type 1

      Yes, it will!

    • My neighbor has an old Genie Blue Max and an aftermarket remote. Both have the Dip Switch set up, but the receiver has 12 switches and the remote has 10. And, I cannot locate any Learn Code Button or LED on the receiver. Can you help me?

      The BlueMax does have 12 switches. It will not work with a 10 switch remote. There is no learn code button on the BlueMax as it is a fixed code model garage door opener. You can use the Genie Master Remote to program to the Genie BlueMax model.

    • Will this remote work for opener IS920/A?

      Yes, it will!

    • Will this remote work with: Genie H6000-07/M? Will it work with Genie 940A

      Yes, this 1-Button remote will work with the H6000-07/M model garage door opener.

    • Will this replace a model GT 912 remote?

      No, it will not. The Genie Master remote will replace the GT912 remote.

    • Have an SD8000 model & looking for an additional remote. Tried a Universal Series opener but couldn’t get it to sync. Any help will be appreciated. Thanks.......

      The SD8000 model garage door opener has the Fixed Code (DipSwitch) style receiver. You would need the Genie Master Remote (GM3T-R) to program to it.

    • The remote I have on label is ACSGT Type 1. Will this replacement model ACSCTG work? Thanks

      Yes, it will!

    • Hi Is this remote work for model WR77?

      No, it will not.

    • Will this work with the pcg 650?

      Yes, it will!

    • Will this work with Genie model 209 Cryptar II?

      No, it will not.

    • will this work with Genie promax PMX5001CB

      Yes, it will!

    • Will this work with model H2000C ?

      Yes, it will!

    • My remote is GICT390 (not GICT390-1). Is this remote the correct one to replace mine?

      Yes, this can replace it.

    • How do I change battery cannot open

      Please contact Genie customer service at 1-800-354-3643 for assistance.

    • Will this be compatible with the PCG700ML geanie model?

      Yes, it is.

    • Will this remote work with Genie Pro Screw Drive 1/2 H.P. Model CM8600IC/A?

      Yes, it will.

    • I just bought a house and there was no remote for the garage door. The model on the side is SD8000. Will this opener work on this model?

      For the SD8000 model garage door opener, you would need the Genie Master Remote, GM3T-R.

    • Will this remote work on a Genie 404?

      No, it will not.

    • Direct replacement for the PCG600?

      This remote will work with the PCG600 model garage door opener.

    • wil the g1t-bx remote work with genie screw drive model CM8600-XL/M and is this remote a replacement for genie remote model TBSTG TYPE 1

      The G1T-BX remote will work with the CM8600-XL/M model garage door opener. This one-button remote does replace the TBSTG Type 1.

    • will this remote work with a Genie Model H6000A? If not - can you please suggest one that will? Thanks!

      Yes, it will!

    • If I get this new style remote and program it to my garage door opener, will my other old style ACSCTG Type 1 remote still work?

      Yes, it will! When you add the new one-button remote, you can still continue to use any other remotes, such as the ACSCTG Type 1- or keypads and vehicles that you already have programmed to your garage door opener.