Free Shipping On All U.S. Orders $14.99 +
{"id":3865089146995,"title":"Wireless Wall Console -39902R","handle":"wireless-wall-console-39902r","description":"\u003cp\u003eThe Genie wireless wall console has enhanced functionality, attractive design with a blue LED light and a completely wireless installation! No strings attached! - No need to have additional wired wall consoles, this wireless wall console easily programs just like the Genie remotes. Having multiple wireless wall consoles is not an issue! This wireless wall console is perfect to add to your side door or additional garage access point with a quick and easy install. A bright blinking blue LED light allows you to find your wireless wall console in the dark easily.  The wireless wall console controls the lights on the garage door opener and the opening\/closing of the garage door. It even has a jogger delay- this delay button allows you to have up to thirty extra seconds to delay the closing of the garage door. No need to jump over the garage door safety sensors just set the time delay close feature for 10, 20, or 30 seconds by pressing the hourglass button on the wireless wall console. The Wireless Wall Console will work with all Genie Intellicode® garage door openers manufactured since 2013. ​The Genie wireless wall console is powered by two AAA batteries. If the batteries are running low you will see a blinking red light weeks ahead of time reminding you to change the AAA batteries.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely Wireless Installation - No need to have an additional wired wall console -absolutely no wiring required for operation!\u003c\/li\u003e\n\u003cli\u003eWorks with all Genie Intellicode® openers since 2013. \u003ca href=\"https:\/\/store.geniecompany.com\/pages\/finding-the-serial-number\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here for more details to see if your garage door opener is compatible.\u003c\/a\u003e  \u003cstrong\u003e(Not compatible with Models 1022, 1024, 1042, 2022, 2024, 2027, 2042.)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge buttons and attractive blue LED light makes the console easy to see in the dark.\u003c\/li\u003e\n\u003cli\u003eThe pulsating light has two optional speeds or can be turned off for maximum battery life.\u003c\/li\u003e\n\u003cli\u003eBacklighting will turn red to notify the user of low battery.\u003c\/li\u003e\n\u003cli\u003eTurn only the garage door opener light itself on at any time for steady light in the garage.\u003c\/li\u003e\n\u003cli\u003ePrograms just like a regular Genie transmitter - having multiple wireless wall consoles is not an issue!\u003c\/li\u003e\n\u003cli\u003eDelay Button- can allow a user an extra 10 seconds to exit calmly and safely before the door begins to move. (Press button up to three times for a maximum of 30 seconds delay before door movement.)\u003c\/li\u003e\n\u003cli\u003eIncludes Wireless Wall Console, (2) AAA batteries - that are easily accessible through a sliding cover on the front, (2) #6 x 1.25 Phillips screws and (2) #6-#8 drywall anchors\u003c\/li\u003e\n\u003cli\u003eModel: GWWC-P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/h4\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Wireless_Wall_Console_Genie_Instruction_ENGSPA_40980503882.pdf?4442\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e For PDF Wireless Wall Console Installation Instructions click here \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGenie's Wireless Wall Console (39902R) Installation and Operation Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY:\u003c\/strong\u003e DOOR, DELAY, and LIGHT buttons are compatible with most Genie openers manufactured since 2013. The wireless wall console is NOT compatible with the following Models: 1022, 1024, 1042, 2022, 2024, 2027 or 2042.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: MOVING DOOR CAN CAUSE SERIOUS INJURY OR DEATH.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• DO NOT install wall console unless the door operator’s safety device works as required by the door operator’s manual.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Wall Console must be mounted in sight of door, at least 5 feet above floor and clear of moving door parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Keep people clear of opening while door is moving.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• DO NOT allow children to play with the transmitter or door operator. If safety reverse does not work properly:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Close door then disconnect opener using the manual release handle.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• DO NOT use transmitter or door operator.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Refer to Door and Door Opener Owner’s Manuals before attempting any repairs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUse high-quality batteries with leakage protection whenever possible. Consider changing batteries annually to help prevent premature corrosion and defects inside any accessory.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/WWC_Figure_A_grande.png?v=1561142526\" alt=\"Genie Wireless Wall Console Installation Instructions Images \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEP 1) Program Wall Console to Garage Door Opener\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProgram Button Type Openers (See Fig. 1)\u003cbr\u003eOpen cover and remove battery tab before programming.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold the program button on the opener until the round LED turns blue, then release.\u003c\/li\u003e\n\u003cli\u003eThe round LED will go out and the long LED will begin flashing purple. Fig. 1.\u003c\/li\u003e\n\u003cli\u003ePress the DOOR button on the WALL CONSOLE 3 times or until the door operates.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/WWC_Figure_1_grande.png?v=1561142842\" alt=\"Genie garage door openers wireless wall console installation instructions \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSTEP 2) Operating the Door with Wall Console\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/WWC_Figure_2_large.png?v=1561142983\" alt=\"Genie's wireless wall console for garage door openers \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDOOR Button - Runs garage door opener.\u003c\/li\u003e\n\u003cli\u003eDELAY Button - Adds a 10+ second delay for door operation. Press the delay button and door will automatically operate after set delay.\u003c\/li\u003e\n\u003cli\u003eLIGHT Button - Overrides the automatic timed light function of the garage door opener.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNOTE: Photocell override operation will not work on most models. See opener owners manual for information pertaining to photocell override.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWireless Wall Console LED Signals:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Wireless Wall Console includes self-diagnostic LEDs\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLED Blue Blink = Indicates NORMAL status.\u003c\/li\u003e\n\u003cli\u003eLED Red Blink = Indicates a low battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClearing the Wireless Wall Console from the Powerhead (Factory Default):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith only (1) AAA battery installed - hold down the DOOR button while simultaneously installing the second AAA battery. Continue to hold the DOOR button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete. Go to STEP 1 to reprogram the wall console to the powerhead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDelay Door Movement Feature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe default delay period is set for a 10-second delay. With this feature, an open door will delay on close. A closed door will delay opening. Once the DELAY button has been pressed the operation can’t be canceled unless the same console DOOR button is pressed. During the activation of a delay operation, consecutive button presses will add 10 seconds to the delay time. Up to 3 consecutive button presses for a total of 30 seconds can be made. At any point in time during a delay operation, a DOOR button press will disable the current delay. The garage door opener light will begin flashing 4-5 seconds prior to movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEP 3) Mounting the Wireless Wall Console (See FIG. A)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall Consoles should be mounted at least 5 feet from floor in a convenient location within sight of the garage door.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove battery cover, battery activation tab and batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMounting to garage framing:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDrill a 3\/32” pilot hole for the screw under battery door.\u003c\/li\u003e\n\u003cli\u003eInstall included screw into pilot hole, leaving 1\/8” gap between the screw head and wall.\u003c\/li\u003e\n\u003cli\u003eHook the slotted mount on back of Wall Console over the screw.\u003c\/li\u003e\n\u003cli\u003eMark and drill a 3\/32” pilot hole for the top screw.\u003c\/li\u003e\n\u003cli\u003eSecure Wall Console to the wall. (Do not over-tighten).\u003c\/li\u003e\n\u003cli\u003eReinstall batteries and battery cover.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eMounting to drywall:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDrill a 3\/16” pilot hole for the drywall anchor.\u003c\/li\u003e\n\u003cli\u003eLightly tap drywall anchor into hole with a hammer until flush with wall.\u003c\/li\u003e\n\u003cli\u003eInstall included screw into anchor, leaving 1\/8” gap between the screw head and wall.\u003c\/li\u003e\n\u003cli\u003eHook the slotted mount on back of Wall Console over the screw.\u003c\/li\u003e\n\u003cli\u003eMark position of pilot hole for the top drywall anchor and remove wall console.\u003c\/li\u003e\n\u003cli\u003eDrill 3\/16” pilot hole for top drywall anchor.\u003c\/li\u003e\n\u003cli\u003eLightly tap anchor into hole with a hammer until flush with wall.\u003c\/li\u003e\n\u003cli\u003eSecure Wall Console to the wall. (Do not over-tighten).\u003c\/li\u003e\n\u003cli\u003eReinstall batteries and battery cover.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWireless Wall Console can also be directly mounted to a standard single gang wire box. (Screws and gang box not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChanging LED Blink Rates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: Any changes to the Blue LED blink rate other than the default setting will impact battery life. Example….going to a faster rate (from once every 3 seconds to once every 2 seconds will decrease battery life).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFactory Default Setting Mode 1\u003c\/strong\u003e (Blink Rate - Once every 3 seconds)\u003cbr\u003eNOTE: THIS WILL ALSO UNPAIR YOUR CONSOLE FROM THE POWERHEAD. With only (1) AAA battery installed - hold down the DOOR button while simultaneously installing the second AAA battery. Continue to hold the DOOR button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete. Go to STEP 1 reprogram your wall console to the powerhead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBLUE LED Blink rate Mode 2\u003c\/strong\u003e (Faster Blink Rate - Once every 2 seconds)\u003cbr\u003eWith only (1) AAA battery installed - hold down the LIGHT button while simultaneously installing the second AAA battery. Continue to hold the LIGHT button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBLUE LED Blink rate Mode 3\u003c\/strong\u003e (Blue LED OFF - Maximum Battery Life)\u003cbr\u003eWith only (1) AAA battery installed - hold down the DELAY button while simultaneously installing the second AAA battery. Continue to hold the DELAY button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete.\u003c\/p\u003e\n\u003cp\u003eFor questions, comments or troubleshooting, contact The Genie Company at:\u003cbr\u003e1 Door Drive, Mount Hope Ohio, 44660 or call 1-800-354-3643 or visit our website at www.geniecompany.com\u003c\/p\u003e\n\u003ch5\u003eFAQ's\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich openers are compatible with the Genie Wireless Wall Console?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console is compatible with most Genie Intellicode® garage door openers manufactured since 2013. The wireless wall console is not compatible with Models 1022, 1024, 1042, 2022, 2024, 2027 or 2042.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you program the wireless wall console?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console can be programmed in a similar way that any other Genie Intellicode remote is programmed – by pressing the PROGRAM button on the opener for approximately 2 seconds, then pressing the large DOOR button on the console 3-4 times until the door moves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWhat functions can you perform with the wireless wall console?\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console has 3 buttons. The largest button (DOOR button) moves the door up and down. There is a “Jogger button” (DELAY button) that when pressed provides the user 10 seconds before the door begins to move. Press the button up to 3 times for a maximum of 30 seconds. The final button is a work LIGHT button that allows you to turn the light on the opener on and off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this console have any type of backlighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Genie wireless wall console has a pulsing backlight that makes it easy to locate in dark spaces. You can change the pulse rate to an alternate speed or turn it off completely for maximum battery life. The backlight will also turn red to visually indicate when the batteries need to be changed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow will I know if the batteries need to be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe backlight will turn red to visually indicate when the batteries need to be changed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the “Jogger button” (DELAY button) work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen the “Jogger Button” (DELAY button) is pressed – the user will have 10 seconds before the door begins to move. The delayed movement could be an upward or downward movement depending on the position of the door when the button is pressed. Press the button up to 3 times for a maximum of 30 seconds before the door moves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I stop the door if I have already pressed the “Jogger button” (DELAY \u003c\/strong\u003e\u003cstrong\u003ebutton)?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe delay function can be stopped by pressing the DOOR button on the same wall console.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter I press the “Jogger button” (DELAY button), how will I know my time is\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eup and the door will begin to move?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter the DELAY button is pressed, the wireless wall console backlight will proceed to flash once per second for 10 seconds, 20 seconds or 30 seconds depending on how many times you pressed it. The work light on the opener will flash 4-5 seconds prior to door movement to alert the user.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I clear out the wireless wall console from the opener head?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn all IntelliG® and TriloG® operators (Models 3024, 3064, 4024, 4124, 4064, 4164), the wireless wall console will clear from the head in the same manner as other radio frequency (RF) devices (such as keypads or transmitters) clear out. This is also true of ReliaG® operators produced since the middle of 2018 (Models 1028, 2028, 3020, 3120). Please follow the instructions inside the manual to clear out RF devices.\u003c\/li\u003e\n\u003cli\u003eFor any ReliaG® operators 2013 – mid-2018, the wireless wall console does NOT clear from the head in the same manner. The wireless wall console can be cleared from the opener head by using the specific process documented on the backside of the console. Please reference the label on the back of the console or the instructions for the wireless wall console.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhen my Safe-T-Beam® system is obstructed, can I override them by holding \u003c\/strong\u003e\u003cstrong\u003edown the DOOR button on the wireless wall console and force the door to close?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is called ‘constant contact to close’. The wireless wall console cannot perform this function with any opener manufactured prior to 2019. It may be performed with some openers manufactured 2019 +, please consult the opener manual to see if this feature applies to the unit you have.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat kind of batteries does the wireless wall console use?\u003c\/strong\u003e\u003cbr\u003e \u003c!-- \/TABS --\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console operates with (2) common AAA batteries conveniently located underneath the battery cover at the front of the wall console.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-06-24T07:18:06-04:00","created_at":"2019-06-21T10:58:35-04:00","vendor":"The Genie Company","type":"Wall Console","tags":["Wireless"],"price":3499,"price_min":3499,"price_max":3499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29181576609907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"39902R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wireless Wall Console -39902R","public_title":null,"options":["Default Title"],"price":3499,"weight":227,"compare_at_price":null,"inventory_quantity":997,"inventory_management":"shopify","inventory_policy":"deny","barcode":"050049021337"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Wireless_Wall_Console_39902R.png?v=1579715107","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Wireless_Wall_Console_39902R_side_view.png?v=1579715276","\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/wirelesswallconsolelife.jpg?v=1579715276"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Wireless_Wall_Console_39902R.png?v=1579715107","options":["Title"],"media":[{"alt":"Genie's garage door opener Wireless Wall Console ","id":5928031191155,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Wireless_Wall_Console_39902R.png?v=1579715107"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Wireless_Wall_Console_39902R.png?v=1579715107","width":1000},{"alt":"Genie wireless wall console- no messy wiring to install ","id":5928036532339,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Wireless_Wall_Console_39902R_side_view.png?v=1579715229"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/Wireless_Wall_Console_39902R_side_view.png?v=1579715229","width":1000},{"alt":"Genie garage door opener wireless wall console is easy to install anywhere in your garage","id":2240612302963,"position":3,"preview_image":{"aspect_ratio":1.025,"height":2002,"width":2052,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/wirelesswallconsolelife.jpg?v=1569401357"},"aspect_ratio":1.025,"height":2002,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/products\/wirelesswallconsolelife.jpg?v=1569401357","width":2052}],"content":"\u003cp\u003eThe Genie wireless wall console has enhanced functionality, attractive design with a blue LED light and a completely wireless installation! No strings attached! - No need to have additional wired wall consoles, this wireless wall console easily programs just like the Genie remotes. Having multiple wireless wall consoles is not an issue! This wireless wall console is perfect to add to your side door or additional garage access point with a quick and easy install. A bright blinking blue LED light allows you to find your wireless wall console in the dark easily.  The wireless wall console controls the lights on the garage door opener and the opening\/closing of the garage door. It even has a jogger delay- this delay button allows you to have up to thirty extra seconds to delay the closing of the garage door. No need to jump over the garage door safety sensors just set the time delay close feature for 10, 20, or 30 seconds by pressing the hourglass button on the wireless wall console. The Wireless Wall Console will work with all Genie Intellicode® garage door openers manufactured since 2013. ​The Genie wireless wall console is powered by two AAA batteries. If the batteries are running low you will see a blinking red light weeks ahead of time reminding you to change the AAA batteries.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely Wireless Installation - No need to have an additional wired wall console -absolutely no wiring required for operation!\u003c\/li\u003e\n\u003cli\u003eWorks with all Genie Intellicode® openers since 2013. \u003ca href=\"https:\/\/store.geniecompany.com\/pages\/finding-the-serial-number\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here for more details to see if your garage door opener is compatible.\u003c\/a\u003e  \u003cstrong\u003e(Not compatible with Models 1022, 1024, 1042, 2022, 2024, 2027, 2042.)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge buttons and attractive blue LED light makes the console easy to see in the dark.\u003c\/li\u003e\n\u003cli\u003eThe pulsating light has two optional speeds or can be turned off for maximum battery life.\u003c\/li\u003e\n\u003cli\u003eBacklighting will turn red to notify the user of low battery.\u003c\/li\u003e\n\u003cli\u003eTurn only the garage door opener light itself on at any time for steady light in the garage.\u003c\/li\u003e\n\u003cli\u003ePrograms just like a regular Genie transmitter - having multiple wireless wall consoles is not an issue!\u003c\/li\u003e\n\u003cli\u003eDelay Button- can allow a user an extra 10 seconds to exit calmly and safely before the door begins to move. (Press button up to three times for a maximum of 30 seconds delay before door movement.)\u003c\/li\u003e\n\u003cli\u003eIncludes Wireless Wall Console, (2) AAA batteries - that are easily accessible through a sliding cover on the front, (2) #6 x 1.25 Phillips screws and (2) #6-#8 drywall anchors\u003c\/li\u003e\n\u003cli\u003eModel: GWWC-P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003ca href=\"https:\/\/store.geniecompany.com\/pages\/proposition-65\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/trianglewarning_icon.jpg?v=1529498861\" alt=\"\" width=\"19\" height=\"19\"\u003e California\u003cspan\u003e Residents: \u003c\/span\u003eProposition 65 WARNING\u003c\/a\u003e\u003c\/h4\u003e\n\u003c!-- TABS --\u003e\n\u003ch5\u003eReviews\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/Wireless_Wall_Console_Genie_Instruction_ENGSPA_40980503882.pdf?4442\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/PDF_ICON_icon.png?v=1533737947\" alt=\"\"\u003e For PDF Wireless Wall Console Installation Instructions click here \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGenie's Wireless Wall Console (39902R) Installation and Operation Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY:\u003c\/strong\u003e DOOR, DELAY, and LIGHT buttons are compatible with most Genie openers manufactured since 2013. The wireless wall console is NOT compatible with the following Models: 1022, 1024, 1042, 2022, 2024, 2027 or 2042.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eWARNING: MOVING DOOR CAN CAUSE SERIOUS INJURY OR DEATH.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• DO NOT install wall console unless the door operator’s safety device works as required by the door operator’s manual.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Wall Console must be mounted in sight of door, at least 5 feet above floor and clear of moving door parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Keep people clear of opening while door is moving.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• DO NOT allow children to play with the transmitter or door operator. If safety reverse does not work properly:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Close door then disconnect opener using the manual release handle.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• DO NOT use transmitter or door operator.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e• Refer to Door and Door Opener Owner’s Manuals before attempting any repairs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUse high-quality batteries with leakage protection whenever possible. Consider changing batteries annually to help prevent premature corrosion and defects inside any accessory.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/WWC_Figure_A_grande.png?v=1561142526\" alt=\"Genie Wireless Wall Console Installation Instructions Images \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEP 1) Program Wall Console to Garage Door Opener\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProgram Button Type Openers (See Fig. 1)\u003cbr\u003eOpen cover and remove battery tab before programming.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold the program button on the opener until the round LED turns blue, then release.\u003c\/li\u003e\n\u003cli\u003eThe round LED will go out and the long LED will begin flashing purple. Fig. 1.\u003c\/li\u003e\n\u003cli\u003ePress the DOOR button on the WALL CONSOLE 3 times or until the door operates.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/WWC_Figure_1_grande.png?v=1561142842\" alt=\"Genie garage door openers wireless wall console installation instructions \"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSTEP 2) Operating the Door with Wall Console\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1470\/8272\/files\/WWC_Figure_2_large.png?v=1561142983\" alt=\"Genie's wireless wall console for garage door openers \"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDOOR Button - Runs garage door opener.\u003c\/li\u003e\n\u003cli\u003eDELAY Button - Adds a 10+ second delay for door operation. Press the delay button and door will automatically operate after set delay.\u003c\/li\u003e\n\u003cli\u003eLIGHT Button - Overrides the automatic timed light function of the garage door opener.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNOTE: Photocell override operation will not work on most models. See opener owners manual for information pertaining to photocell override.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWireless Wall Console LED Signals:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Wireless Wall Console includes self-diagnostic LEDs\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLED Blue Blink = Indicates NORMAL status.\u003c\/li\u003e\n\u003cli\u003eLED Red Blink = Indicates a low battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClearing the Wireless Wall Console from the Powerhead (Factory Default):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith only (1) AAA battery installed - hold down the DOOR button while simultaneously installing the second AAA battery. Continue to hold the DOOR button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete. Go to STEP 1 to reprogram the wall console to the powerhead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDelay Door Movement Feature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe default delay period is set for a 10-second delay. With this feature, an open door will delay on close. A closed door will delay opening. Once the DELAY button has been pressed the operation can’t be canceled unless the same console DOOR button is pressed. During the activation of a delay operation, consecutive button presses will add 10 seconds to the delay time. Up to 3 consecutive button presses for a total of 30 seconds can be made. At any point in time during a delay operation, a DOOR button press will disable the current delay. The garage door opener light will begin flashing 4-5 seconds prior to movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEP 3) Mounting the Wireless Wall Console (See FIG. A)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall Consoles should be mounted at least 5 feet from floor in a convenient location within sight of the garage door.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove battery cover, battery activation tab and batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMounting to garage framing:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDrill a 3\/32” pilot hole for the screw under battery door.\u003c\/li\u003e\n\u003cli\u003eInstall included screw into pilot hole, leaving 1\/8” gap between the screw head and wall.\u003c\/li\u003e\n\u003cli\u003eHook the slotted mount on back of Wall Console over the screw.\u003c\/li\u003e\n\u003cli\u003eMark and drill a 3\/32” pilot hole for the top screw.\u003c\/li\u003e\n\u003cli\u003eSecure Wall Console to the wall. (Do not over-tighten).\u003c\/li\u003e\n\u003cli\u003eReinstall batteries and battery cover.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eMounting to drywall:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDrill a 3\/16” pilot hole for the drywall anchor.\u003c\/li\u003e\n\u003cli\u003eLightly tap drywall anchor into hole with a hammer until flush with wall.\u003c\/li\u003e\n\u003cli\u003eInstall included screw into anchor, leaving 1\/8” gap between the screw head and wall.\u003c\/li\u003e\n\u003cli\u003eHook the slotted mount on back of Wall Console over the screw.\u003c\/li\u003e\n\u003cli\u003eMark position of pilot hole for the top drywall anchor and remove wall console.\u003c\/li\u003e\n\u003cli\u003eDrill 3\/16” pilot hole for top drywall anchor.\u003c\/li\u003e\n\u003cli\u003eLightly tap anchor into hole with a hammer until flush with wall.\u003c\/li\u003e\n\u003cli\u003eSecure Wall Console to the wall. (Do not over-tighten).\u003c\/li\u003e\n\u003cli\u003eReinstall batteries and battery cover.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWireless Wall Console can also be directly mounted to a standard single gang wire box. (Screws and gang box not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChanging LED Blink Rates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: Any changes to the Blue LED blink rate other than the default setting will impact battery life. Example….going to a faster rate (from once every 3 seconds to once every 2 seconds will decrease battery life).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFactory Default Setting Mode 1\u003c\/strong\u003e (Blink Rate - Once every 3 seconds)\u003cbr\u003eNOTE: THIS WILL ALSO UNPAIR YOUR CONSOLE FROM THE POWERHEAD. With only (1) AAA battery installed - hold down the DOOR button while simultaneously installing the second AAA battery. Continue to hold the DOOR button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete. Go to STEP 1 reprogram your wall console to the powerhead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBLUE LED Blink rate Mode 2\u003c\/strong\u003e (Faster Blink Rate - Once every 2 seconds)\u003cbr\u003eWith only (1) AAA battery installed - hold down the LIGHT button while simultaneously installing the second AAA battery. Continue to hold the LIGHT button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBLUE LED Blink rate Mode 3\u003c\/strong\u003e (Blue LED OFF - Maximum Battery Life)\u003cbr\u003eWith only (1) AAA battery installed - hold down the DELAY button while simultaneously installing the second AAA battery. Continue to hold the DELAY button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete.\u003c\/p\u003e\n\u003cp\u003eFor questions, comments or troubleshooting, contact The Genie Company at:\u003cbr\u003e1 Door Drive, Mount Hope Ohio, 44660 or call 1-800-354-3643 or visit our website at www.geniecompany.com\u003c\/p\u003e\n\u003ch5\u003eFAQ's\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich openers are compatible with the Genie Wireless Wall Console?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console is compatible with most Genie Intellicode® garage door openers manufactured since 2013. The wireless wall console is not compatible with Models 1022, 1024, 1042, 2022, 2024, 2027 or 2042.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you program the wireless wall console?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console can be programmed in a similar way that any other Genie Intellicode remote is programmed – by pressing the PROGRAM button on the opener for approximately 2 seconds, then pressing the large DOOR button on the console 3-4 times until the door moves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWhat functions can you perform with the wireless wall console?\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console has 3 buttons. The largest button (DOOR button) moves the door up and down. There is a “Jogger button” (DELAY button) that when pressed provides the user 10 seconds before the door begins to move. Press the button up to 3 times for a maximum of 30 seconds. The final button is a work LIGHT button that allows you to turn the light on the opener on and off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this console have any type of backlighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Genie wireless wall console has a pulsing backlight that makes it easy to locate in dark spaces. You can change the pulse rate to an alternate speed or turn it off completely for maximum battery life. The backlight will also turn red to visually indicate when the batteries need to be changed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow will I know if the batteries need to be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe backlight will turn red to visually indicate when the batteries need to be changed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the “Jogger button” (DELAY button) work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen the “Jogger Button” (DELAY button) is pressed – the user will have 10 seconds before the door begins to move. The delayed movement could be an upward or downward movement depending on the position of the door when the button is pressed. Press the button up to 3 times for a maximum of 30 seconds before the door moves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I stop the door if I have already pressed the “Jogger button” (DELAY \u003c\/strong\u003e\u003cstrong\u003ebutton)?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe delay function can be stopped by pressing the DOOR button on the same wall console.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter I press the “Jogger button” (DELAY button), how will I know my time is\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eup and the door will begin to move?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter the DELAY button is pressed, the wireless wall console backlight will proceed to flash once per second for 10 seconds, 20 seconds or 30 seconds depending on how many times you pressed it. The work light on the opener will flash 4-5 seconds prior to door movement to alert the user.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I clear out the wireless wall console from the opener head?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn all IntelliG® and TriloG® operators (Models 3024, 3064, 4024, 4124, 4064, 4164), the wireless wall console will clear from the head in the same manner as other radio frequency (RF) devices (such as keypads or transmitters) clear out. This is also true of ReliaG® operators produced since the middle of 2018 (Models 1028, 2028, 3020, 3120). Please follow the instructions inside the manual to clear out RF devices.\u003c\/li\u003e\n\u003cli\u003eFor any ReliaG® operators 2013 – mid-2018, the wireless wall console does NOT clear from the head in the same manner. The wireless wall console can be cleared from the opener head by using the specific process documented on the backside of the console. Please reference the label on the back of the console or the instructions for the wireless wall console.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhen my Safe-T-Beam® system is obstructed, can I override them by holding \u003c\/strong\u003e\u003cstrong\u003edown the DOOR button on the wireless wall console and force the door to close?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is called ‘constant contact to close’. The wireless wall console cannot perform this function with any opener manufactured prior to 2019. It may be performed with some openers manufactured 2019 +, please consult the opener manual to see if this feature applies to the unit you have.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat kind of batteries does the wireless wall console use?\u003c\/strong\u003e\u003cbr\u003e \u003c!-- \/TABS --\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wireless wall console operates with (2) common AAA batteries conveniently located underneath the battery cover at the front of the wall console.\u003c\/li\u003e\n\u003c\/ul\u003e"}

Wireless Wall Console -39902R

Product Description
$34.99
Maximum quantity available reached.

The Genie wireless wall console has enhanced functionality, attractive design with a blue LED light and a completely wireless installation! No strings attached! - No need to have additional wired wall consoles, this wireless wall console easily programs just like the Genie remotes. Having multiple wireless wall consoles is not an issue! This wireless wall console is perfect to add to your side door or additional garage access point with a quick and easy install. A bright blinking blue LED light allows you to find your wireless wall console in the dark easily.  The wireless wall console controls the lights on the garage door opener and the opening/closing of the garage door. It even has a jogger delay- this delay button allows you to have up to thirty extra seconds to delay the closing of the garage door. No need to jump over the garage door safety sensors just set the time delay close feature for 10, 20, or 30 seconds by pressing the hourglass button on the wireless wall console. The Wireless Wall Console will work with all Genie Intellicode® garage door openers manufactured since 2013. ​The Genie wireless wall console is powered by two AAA batteries. If the batteries are running low you will see a blinking red light weeks ahead of time reminding you to change the AAA batteries.

  • Completely Wireless Installation - No need to have an additional wired wall console -absolutely no wiring required for operation!
  • Works with all Genie Intellicode® openers since 2013. Click here for more details to see if your garage door opener is compatible.  (Not compatible with Models 1022, 1024, 1042, 2022, 2024, 2027, 2042.)
  • Large buttons and attractive blue LED light makes the console easy to see in the dark.
  • The pulsating light has two optional speeds or can be turned off for maximum battery life.
  • Backlighting will turn red to notify the user of low battery.
  • Turn only the garage door opener light itself on at any time for steady light in the garage.
  • Programs just like a regular Genie transmitter - having multiple wireless wall consoles is not an issue!
  • Delay Button- can allow a user an extra 10 seconds to exit calmly and safely before the door begins to move. (Press button up to three times for a maximum of 30 seconds delay before door movement.)
  • Includes Wireless Wall Console, (2) AAA batteries - that are easily accessible through a sliding cover on the front, (2) #6 x 1.25 Phillips screws and (2) #6-#8 drywall anchors
  • Model: GWWC-P

 California Residents: Proposition 65 WARNING

Sku: 39902R

 For PDF Wireless Wall Console Installation Instructions click here 

Genie's Wireless Wall Console (39902R) Installation and Operation Instructions

COMPATIBILITY: DOOR, DELAY, and LIGHT buttons are compatible with most Genie openers manufactured since 2013. The wireless wall console is NOT compatible with the following Models: 1022, 1024, 1042, 2022, 2024, 2027 or 2042.

WARNING: MOVING DOOR CAN CAUSE SERIOUS INJURY OR DEATH.
• DO NOT install wall console unless the door operator’s safety device works as required by the door operator’s manual.
• Wall Console must be mounted in sight of door, at least 5 feet above floor and clear of moving door parts.
• Keep people clear of opening while door is moving.
• DO NOT allow children to play with the transmitter or door operator. If safety reverse does not work properly:
• Close door then disconnect opener using the manual release handle.
• DO NOT use transmitter or door operator.
• Refer to Door and Door Opener Owner’s Manuals before attempting any repairs.

Use high-quality batteries with leakage protection whenever possible. Consider changing batteries annually to help prevent premature corrosion and defects inside any accessory.

Genie Wireless Wall Console Installation Instructions Images

STEP 1) Program Wall Console to Garage Door Opener

Program Button Type Openers (See Fig. 1)
Open cover and remove battery tab before programming.

  1. Press and hold the program button on the opener until the round LED turns blue, then release.
  2. The round LED will go out and the long LED will begin flashing purple. Fig. 1.
  3. Press the DOOR button on the WALL CONSOLE 3 times or until the door operates.

Genie garage door openers wireless wall console installation instructions


STEP 2) Operating the Door with Wall Console

Genie's wireless wall console for garage door openers

  1. DOOR Button - Runs garage door opener.
  2. DELAY Button - Adds a 10+ second delay for door operation. Press the delay button and door will automatically operate after set delay.
  3. LIGHT Button - Overrides the automatic timed light function of the garage door opener.

NOTE: Photocell override operation will not work on most models. See opener owners manual for information pertaining to photocell override.

Wireless Wall Console LED Signals:

The Wireless Wall Console includes self-diagnostic LEDs

  • LED Blue Blink = Indicates NORMAL status.
  • LED Red Blink = Indicates a low battery.

Clearing the Wireless Wall Console from the Powerhead (Factory Default):

With only (1) AAA battery installed - hold down the DOOR button while simultaneously installing the second AAA battery. Continue to hold the DOOR button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete. Go to STEP 1 to reprogram the wall console to the powerhead.

Delay Door Movement Feature:

The default delay period is set for a 10-second delay. With this feature, an open door will delay on close. A closed door will delay opening. Once the DELAY button has been pressed the operation can’t be canceled unless the same console DOOR button is pressed. During the activation of a delay operation, consecutive button presses will add 10 seconds to the delay time. Up to 3 consecutive button presses for a total of 30 seconds can be made. At any point in time during a delay operation, a DOOR button press will disable the current delay. The garage door opener light will begin flashing 4-5 seconds prior to movement.

STEP 3) Mounting the Wireless Wall Console (See FIG. A)

Wall Consoles should be mounted at least 5 feet from floor in a convenient location within sight of the garage door.

  • Remove battery cover, battery activation tab and batteries.

Mounting to garage framing:

  1. Drill a 3/32” pilot hole for the screw under battery door.
  2. Install included screw into pilot hole, leaving 1/8” gap between the screw head and wall.
  3. Hook the slotted mount on back of Wall Console over the screw.
  4. Mark and drill a 3/32” pilot hole for the top screw.
  5. Secure Wall Console to the wall. (Do not over-tighten).
  6. Reinstall batteries and battery cover.

Mounting to drywall:

  1. Drill a 3/16” pilot hole for the drywall anchor.
  2. Lightly tap drywall anchor into hole with a hammer until flush with wall.
  3. Install included screw into anchor, leaving 1/8” gap between the screw head and wall.
  4. Hook the slotted mount on back of Wall Console over the screw.
  5. Mark position of pilot hole for the top drywall anchor and remove wall console.
  6. Drill 3/16” pilot hole for top drywall anchor.
  7. Lightly tap anchor into hole with a hammer until flush with wall.
  8. Secure Wall Console to the wall. (Do not over-tighten).
  9. Reinstall batteries and battery cover.

Wireless Wall Console can also be directly mounted to a standard single gang wire box. (Screws and gang box not included)

Changing LED Blink Rates

NOTE: Any changes to the Blue LED blink rate other than the default setting will impact battery life. Example….going to a faster rate (from once every 3 seconds to once every 2 seconds will decrease battery life).

Factory Default Setting Mode 1 (Blink Rate - Once every 3 seconds)
NOTE: THIS WILL ALSO UNPAIR YOUR CONSOLE FROM THE POWERHEAD. With only (1) AAA battery installed - hold down the DOOR button while simultaneously installing the second AAA battery. Continue to hold the DOOR button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete. Go to STEP 1 reprogram your wall console to the powerhead.

BLUE LED Blink rate Mode 2 (Faster Blink Rate - Once every 2 seconds)
With only (1) AAA battery installed - hold down the LIGHT button while simultaneously installing the second AAA battery. Continue to hold the LIGHT button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete.

BLUE LED Blink rate Mode 3 (Blue LED OFF - Maximum Battery Life)
With only (1) AAA battery installed - hold down the DELAY button while simultaneously installing the second AAA battery. Continue to hold the DELAY button for a total of 10 seconds until the LED flashes 3 times letting you know your selection is complete.

For questions, comments or troubleshooting, contact The Genie Company at:
1 Door Drive, Mount Hope Ohio, 44660 or call 1-800-354-3643 or visit our website at www.geniecompany.com

Which openers are compatible with the Genie Wireless Wall Console?

  • The wireless wall console is compatible with most Genie Intellicode® garage door openers manufactured since 2013. The wireless wall console is not compatible with Models 1022, 1024, 1042, 2022, 2024, 2027 or 2042.

How do you program the wireless wall console?

  • The wireless wall console can be programmed in a similar way that any other Genie Intellicode remote is programmed – by pressing the PROGRAM button on the opener for approximately 2 seconds, then pressing the large DOOR button on the console 3-4 times until the door moves.
What functions can you perform with the wireless wall console?
  • The wireless wall console has 3 buttons. The largest button (DOOR button) moves the door up and down. There is a “Jogger button” (DELAY button) that when pressed provides the user 10 seconds before the door begins to move. Press the button up to 3 times for a maximum of 30 seconds. The final button is a work LIGHT button that allows you to turn the light on the opener on and off.

Does this console have any type of backlighting?

  • The Genie wireless wall console has a pulsing backlight that makes it easy to locate in dark spaces. You can change the pulse rate to an alternate speed or turn it off completely for maximum battery life. The backlight will also turn red to visually indicate when the batteries need to be changed.

How will I know if the batteries need to be changed?

  • The backlight will turn red to visually indicate when the batteries need to be changed.

How does the “Jogger button” (DELAY button) work?

  • When the “Jogger Button” (DELAY button) is pressed – the user will have 10 seconds before the door begins to move. The delayed movement could be an upward or downward movement depending on the position of the door when the button is pressed. Press the button up to 3 times for a maximum of 30 seconds before the door moves.

How do I stop the door if I have already pressed the “Jogger button” (DELAY button)?

  • The delay function can be stopped by pressing the DOOR button on the same wall console.

After I press the “Jogger button” (DELAY button), how will I know my time is
up and the door will begin to move?

  • After the DELAY button is pressed, the wireless wall console backlight will proceed to flash once per second for 10 seconds, 20 seconds or 30 seconds depending on how many times you pressed it. The work light on the opener will flash 4-5 seconds prior to door movement to alert the user.

How do I clear out the wireless wall console from the opener head?

  • In all IntelliG® and TriloG® operators (Models 3024, 3064, 4024, 4124, 4064, 4164), the wireless wall console will clear from the head in the same manner as other radio frequency (RF) devices (such as keypads or transmitters) clear out. This is also true of ReliaG® operators produced since the middle of 2018 (Models 1028, 2028, 3020, 3120). Please follow the instructions inside the manual to clear out RF devices.
  • For any ReliaG® operators 2013 – mid-2018, the wireless wall console does NOT clear from the head in the same manner. The wireless wall console can be cleared from the opener head by using the specific process documented on the backside of the console. Please reference the label on the back of the console or the instructions for the wireless wall console.

When my Safe-T-Beam® system is obstructed, can I override them by holding down the DOOR button on the wireless wall console and force the door to close?

  • This is called ‘constant contact to close’. The wireless wall console cannot perform this function with any opener manufactured prior to 2019. It may be performed with some openers manufactured 2019 +, please consult the opener manual to see if this feature applies to the unit you have.

What kind of batteries does the wireless wall console use?

  • The wireless wall console operates with (2) common AAA batteries conveniently located underneath the battery cover at the front of the wall console.

Questions & Answers

Ask a Question
  • Where is the program button on the 39902R? The instructions are not clear at all. Only led I see is the round one on the opener button, do not see a program button. Please help[

    After getting the garage door opener powerhead into learn mode, you will hit the main button on the wall console three times (this is the button that will open and close the door).

  • Will the wireless 39902R wall console work with Conversion kit #36359R?

    No, it will not.

  • Is it possible to make the door button function as the delay button? I have one of these mounted near the door and would like to make sure it ALWAYS delays closing for safety reasons. My kids forget and push the larger button.

    No, the delay function will not work unless the delay button is pushed before the open/close button.

  • How far / how many feet from the house will this unit work / operate the garage door ?

    We do not recommend installing this wireless wall console out of sight of the garage door.